Graco 336165EN-E User Manual

Flow Meters

For Proportioning Equipment

Coriolis Mass Flow

• Non-intrusive mass flow meter

• Designed for all abrasive and filled materials

• Stainless steel components are waterborne and acid compatible for a wide range of materials

• Uses less material to flush

• Wide range of flow rates and material

• 1/4 in and 3/8 in ID options

• FM-, CSA-, CE- and ATEX-marked

S3000

G3000 G3000 HR

G250/G250 HR, G3000/ G3000 HR and S3000

• Positive displacement, spur gear flow meter

• Designed for non-abrasive and unfilled materials

• Highly accurate, even with low flow rates

• Stainless steel components can handle low to medium viscosity materials

• ETL us, ATEX- and CE-marked

G250 G250 HR

HG6000

HG6000/HG6000 HR

• Positive displacement, helical gear flow meter

• Designed for higher flow rates and higher viscosity materials

• Highly accurate, even with low flow rates

• Stainless steel components are water-base compatible for medium to high viscosity materials

• ATEX- and CE-marked

Technical Specifications and Ordering Information

G250/G250HR, G3000/G3000HR and S3000 Gear Flow Meters

G250 G250HR G3000 G3000HR S3000

Part number 249426 249427 289813 (90º Sensor) 289814 (90º Sensor) 258718

Maximum working fluid pressure

Flow range 75 - 3,800 cc/min 38 - 1,900 cc/min 75 - 3,800 cc/min 38 - 1,900 cc/min 50 - 2,000 cc/min

Viscosity range 20 - 3,000 cps 20 - 3,000 cps 20 - 3,000 cps 20 - 3,000 cps 0.5 - 1,000 cps

Resolution 0.119 cc/pulse 0.061 cc/pulse 0.119 cc/pulse 0.061 cc/pulse 0.021 cc/pulse

Material compatibility Solventborne paints and

Wetted parts 303 SST, tungsten carbide

Recommended uses Widely used in finishing

Instruction manuals 308778 308778 308778 308778 308778

250 psi (17 bar, 1.7 MPa)

resins (low solids), oil and catalysts

and PTFE

applications. Uses include solventborne polyurethanes and epoxies

250 psi (17 bar, 1.7 MPa)

Solventborne paints and resins (low solids), oil and catalysts

303 SST, tungsten carbide and PTFE

Low flow version of G3000. Flow rates as low as 50 cc/min

4000 psi (276 bar, 28 MPa)

Solventborne paints and resins (low solids), oil and catalysts

303 SST, tungsten carbide and PTFE

Widely used in finishing applications. Uses include solventborne polyurethanes and epoxies

4000 psi (276 bar, 28 MPa)

Solventborne paints and resins (low solids), oil and catalysts

303 SST, tungsten carbide and PTFE

Low flow version of G3000. Flow rates as low as 50 cc/min

3000 psi (207 bar, 20 MPa)

Solvents, solventborne paints (no filled materials), oil and catalysts

303 SST and PTFE

Solvent tracking and metering of low viscosity materials

HG6000/HG6000HR and Coriolis Mass Flow Meters

HG6000 HG6000HR Coriolis Mass Flow Coriolis Mass Flow

Part number 280560 246652 16M519* (1/4” ID) 15T634** (3/8” ID)

Maximum working fluid pressure

Flow range 50 - 22,700 cc/min 25 - 7,571cc/min 20 - 4,000 cc/min 20 - 8,000 cc/min

Viscosity range 30 - 1,000,000 cps 30 - 1,000,000 cps 0.1 - 3,000 cps 0.1 - 3,000 cps

Resolution 0.286 cc/pulse 0.143 cc/pulse 0.061 cc/pulse, adjustable 0.061 cc/pulse, adjustable

Material compatibility Solventborne and waterborne paints

Wetted parts 303 SST, tungsten carbide, and

Recommended uses Use with viscosities up to 100,000

Instruction manuals 309834 309834 310696 310696

*ProMix 2KS Meter Kit Part Number 24M261

**ProMix 2KS Meter Kit Part Number 258151

6000 psi (410 bar, 41 MPa)

and resins, oil and catalysts

PTFE

cps and when flow rates exceed 4000 cc/min

6000 psi (410 bar, 41 MPa)

Solventborne paints and resins, oil and catalysts

303 SST, tungsten carbide, and PTFE

Low flow version of G3000. Flow rates as low as 50 cc/min

2300 psi (158 bar, 16 MPa)

Solventborne and waterborne materials, catalyzed varnishes and oil

303 and 440 SST and PTFE 303 and 440 SST and PTFE

Use with virtually any material and flow rate. Non intrusive design. Common uses include waterborne and acid-based materials

2300 psi (158 bar, 16 MPa)

Solventborne and waterborne materials, catalyzed varnishes and oil

High flow version of 15D135

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com.