Suggested automated lubrication system layout for Backhoe.
Kit No.: 24R379, G3, USP, 43PT
333505B
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all
related manuals. Save all instructions.
Related Manuals
Manual No. Manual Title
332305G3 Pump
3A0525Pressure Relief Valve
3A0528Remote Manual Run
3A0860USP Valves
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to
replace the installation and maintenance instructions provided by the original equipment manufacturer.
Fluid leaks from incorrectly installed or ruptured components, and/or failure to verify the components are properly installed and tested, can result in serious injury such
as fluid spraying in the eyes or on skin and fluid injection,
or equipment damage.
To prevent injury or equipment damage, installation must
be done by a professional and tested prior to use. Consult Parker literature for specific hose assembly instructions. These instructions are available from your Parker
representative or at www.Parker.com/pdf.
Page 2
Mobile Lubrication Library
Suggested Lube Points
USP Valves
Page 3
LUBE POINT INFORMATION
USP POINT POINT NO. VOLUME USP BLOCK BEARING DESCRIPTION
71SingleSB#2Left 4 in 1 ram rod side
82SingleSB#2Left 4 in cylinder side
13SingleSB#2Left bucket top pivot
9 and 104DoubleSB#2Left bucket bottom pivot
25SingleSB#2Right bucket top pivot
3 and 46DoubleSB#2Right bucket bottom pivot
57SingleSB#2Right 4 in 1 ram side
68SingleSB#2Right 4 in 1 ram cylinder side
9 and 109DoubleSB#3Left lower tipping link
11 and 1210DoubleSB#3Left upper tipping link
1311SingleSB#3Left bucket crowd ram cylinder
1412SingleSB#3Left loader arm center pivot
1513SingleSB#3Left loader arm bottom link
1614SingleSB#3Left loader lift ram rod end
1 and 215DoubleSB#3Left main loader pivot
316SingleSB#3Left middle link
4 and 517DoubleSB#3Left main lift cylinder end
627SingleSB#3Left top trunion bearing
728SingleSB#3Left bottom trunion bearing
829SingleSB#3Front axle pivot
9 and 1018DoubleSB#4Right upper tipping link
11 and 1219DoubleSB#4Right lower tipping link
1320SingleSB#4Right bucket crowd ram cylinder end
1421SingleSB#4Right loader arm center pivot
122SingleSB#4Right loader arm bottom link
223SingleSB#4Right loader lift ram rod end
324SingleSB#4Right main loader pivot
425SingleSB#4Right middle link
5 and 626DoubleSB#4Right main lift ram cylinder end
730SingleSB#4Right top trunion bearing
831SingleSB#4Right bottom trunion bearing
932Single SB#5Right slew ram rod end
1033SingleSB#5Left slew ram rod end
11 and 1234DoubleSB#5Bottom king post bearing
13 and 1435DoubleSB#5Right lower boom pivot
1536Single SB#5Middle lower boom pivot
1637SingleSB#5Left lower boom pivot
138Single SB#5Dipper ram cylinder end
239SingleSB#5Dipper ram rod end
3 and 440DoubleSB#5Boom - dipper main pivot
5 and 641DoubleSB#5Boom - dipper main pivot
742Single SB#5Bucket ram cylinder end
843SingleSB#5Bucket link top
Mobile Lubrication Library
Page 4
Mobile Lubrication Library
Part
Number
96G099PUMP, G3-G-12MX-4L0L00-UDMVA1R2 (see manual 332305)
571036KIT, accessory, cover
571028KIT, accessory, pressure relief (see manual 3A0525)
24E408KIT, valve, USP, 10 outlet (see manual 3A0860)
24E410KIT, valve, USP, 14 outlet (see manual 3A0860)
24E411KIT, valve, USP, 16 outlet (see manual 3A0860)
571032KIT, remote manual run, 12V, w/ cable (see manual 3A0528)
24N008KIT, accessory, mounting, USP, 10-12
24N009KIT, accessory, mounting, USP, 14-16
16U003KIT, accessory, hose, 125 ft
556773HOSE, end female swivel SAE 4 JIC
556763FITTING, 4 JIC 1/8 pm
555749CONNECTOR, 4 JIC 1/8 pm
557393COUPLING, 1/8 fp x 1/8 mp x 1-1/4 HEX
556402FITTING, 1/4 x 1/8 nptf hex
557349PLUG, dryseal 1/8 nptf
16U105KIT, accessory, guard, scuff, 100 ft
15K783FITTING, elbow, street, 1/8
127009TIE, cable, 14.75’ x .31” black
16U107KIT, accessory, hose, 400 ft
16U310KIT, accessory, guard, scuff, 325 ft
24F467PLUG, USP, doubling plug
557944CLAMP, 7/16, tube 4TS6-14002
127012CLAMP, hose, .375 OD hose
563178COUPLING, extension 1/8 female to 1/8 male
127013FITTING, swivel, JIC 37D size #4
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original information. This manual contains English. MM 333505
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
August 2013, revised January 2014
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.