Graco 333029A User Manual

Instructions

4

5

3

2

1

7

®

DynaStar

35#

Follower Plate

For use with 35# HP and HF Model DynaStar Pumps.

Part No.: 77X510

Important Safety Instructions

Read all warnings and instructions in this
manual and the DynaStar Pump Instruction
Manual. Save all instructions.

333029A

EN

Parts

Ref.
No. Part No. Description Qty.

1 183241 WIPER 1
2 183245 SPRING, retaining 1
3 183242 PLATE, follower 1
4* 186104 GROMMET, follower,

non-tube-in-tube models (factory
installed)

16V328 GROMMET, follower, tube-in-tube

models (shipped loose)

5 103833 SCREW, machine; bnd-hd; 10-32 x

0.375 in. long
6 108714 PIN, clevis 1
7 220651 PLATE, wiper 1

*For tube-in-tube installations only, the factory installed
grommet (186104) must be removed from the follower
plate and grommet (16V328), installed in it’s place. Dis­card the unused grommet.

1

1

8

6

Follower Plate Installation

Instructions

NOTE: Before the follower plate is installed, pack the

cone with grease.

1. Relieve pressure using the Pressure Relief Proce­dure in your separate pump manual.

2. Remove pump.

3. Pack grease into follower plate cone (F

IG. 1).

4. Press follower plate, cone side up, into a pail filled
with grease and firmly press on it to remove all air
pockets.

FIG. 2

5. Reinstall pump and drum cover (See Drum Cover
Installation instructions included in the Drum Cover
instruction manual).

FIG. 1

6. Prime pump.

Graco Information

For the latest information about Graco products, visit www.graco.com.

TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-533-9655, Fax: [phone]

All written and visual data contained in this document reflects the latest product information available at the time of publication.

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents.

Original instructions. This manual contains English. MM 333029

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

www.graco.com
November 2013