ti22882a
Standard Hi-Boy Series
ProContractor Series
IronMan Series
Standard Lo-Boy Series
Parts
695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark X
332918D
Electric Airless Sprayers
For Portable Airless Spraying of Architectural Coatings and Paints.
For professional use only. Not approved for use in European explosive atmosphere locations.
3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
Related Manuals:
332916
309495
308491
311861
311254
333028
332922
EN
Models
Models
695/795/1095/1595 UltraMax II, Standard, ProContractor, IronMan Models
Model
Number
16W892 695 120
16W893 695 120
16W894 695 120
826177 695 120
826178 695 120
826179 695 120
16W895 795 120
16W896 795 120
826180 795 120
826181 795 120
16W899 1095 120
16W900 1095 120
16W901 1095 120
826182 1095 120
826183 1095 120
826184 1095 120
16W902 1595 120
16W903 1595 120
16W907 1595 120
16W936 1595 120
16W937 1595 120
16W938 1595 120
826185 1595 120
826186 1595 120
826187 1595 120
826188 1595 120
826189 1595 120
826190 1595 120
Model Voltage
Standard
Hi-Boy
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Standard
Lo-Boy
✓
✓
ProContractor IronMan
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Mark IV / Mark V / Mark X Standard, ProContractor, IronMan Models
3/8 in. x 50ft +
HD
Model
Number
16W897 Mark IV 120
16W898 Mark IV 120
16W905 Mark V 120
16W906 Mark V 120
16W939 Mark V 120
16W940 Mark V 120
16X947 Mark V 120
16W908 Mark X 230
16X099 Mark X 230
Model Voltage
Standard
Series
Pro
Contractor
Series
IronMan
Series
Flex
Plus
Gun
Blue
Texture
Gun
Inline
Texture
Gun
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
✓✓ ✓
1/4 in. x 3 ft
whip
(9.5mm x 15m
+ 6.4mm x
0.9m whip)
2 332918D
3/8 in. x 100 ft
+ 1/4 in. x 3 ft
whip
(9.5mm x 30m
+ 6.4mm x
0.9m whip)
1/2 in. x 50 ft +
3/8 in. x 12 ft
whip
(12.7mm x 15m
+ 9.5mm x
3.7m whip)
1/2 in. x 100 ft
+ 3/8 in. x 12 ft
(12.7mm x 30m
+ 9.5mm x
3.7m whip)
whip
Table of Contents
Models
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
695 Lo-Boy Standard . . . . . . . . . . . . . . . . . . . . . . . . 4
695 Lo-Boy Standard Parts List . . . . . . . . . . . . . 5
695/795/Mark IV Hi-Boy Standard . . . . . . . . . . . . . . 6
695/795/Mark IV Hi-Boy Standard Parts List . . . . 7
1095/1595/Mark V Hi-Boy Standard . . . . . . . . . . . . 8
1095/1595/Mark V Hi-Boy Standard . . . . . . . . . . 9
Mark X Standard . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mark X Standard Parts List . . . . . . . . . . . . . . . . 11
695/795/MARK IV ProContractor . . . . . . . . . . . . . 12
695/795/MARK IV ProContractor Parts List . . . 13
1095/1595/MARK V ProContractor . . . . . . . . . . . . 14
1095/1595/MARK V ProContractor Parts List . . 15
Mark X ProContractor . . . . . . . . . . . . . . . . . . . . . . 16
Mark X ProContractor . . . . . . . . . . . . . . . . . . . . 17
1095/1595/Mark V IronMan . . . . . . . . . . . . . . . . . . 18
1095/1595/Mark V IronMan . . . . . . . . . . . . . . . . 19
Hose Reel and Gun . . . . . . . . . . . . . . . . . . . . . . . . 20
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Control Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Graco Standard Warranty . . . . . . . . . . . . . . . . . . . 24
332918D 3
695 Lo-Boy Standard
93
62
99
84
90
51
83
91
28
30
89
28
108
36
58
85
126
127
12
14
24
43
56
37
124
6
123
117
17
10
22
11
11
109
76
106
107
105
8
18
18
159
160
31
31
41
94
71
72
110
90a
77
44
76
138
139
140
141
31
48
87
93
129
154
ti22891a
See pages 21 and 22.
1
2
7
4
5
6
3
8
1
6
1
3
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
22-28 in-lb (2.4 - 3.1 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
70-80 ft-lb (94.9 - 108.4 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
695 Lo-Boy Standard
4 332918D
695 Lo-Boy Standard Parts List
695 Lo-Boy Standard
Ref. Part Description Qty.
6 15C753 SCREW, mach, torx, hex 5
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11* 119420 WHEEL, pneumatic 2
12 106115 WASH, lock, spring 4
14 110141 SCREW, cap, socket hd 4
17 15C871 CAP, leg 2
18 109032 SCREW, mach, pnh 4
22 116038 WASHER, wave spring 2
24 111040 NUT, hex, flanged 4
28 114672 WASHER, thrust 2
30 114699 WASHER, thrust 1
31 118444 SCREW, machine, hex washer hd 6
36 116191 WASHER, thrust 1
37 100057 SCREW, cap, hex hd 4
41 196178 FITTING 1
43 176817 SPRING, retaining 1
44 176818 PIN, str, hdls 1
48 189920 STRAINER, (1-11 1/2 NPSM) 1
51 24V023 COVER, drive, plastic, painted;
includes 31
56 192723 NUT, retaining 1
58 287281 695 SHIELD, motor, painted;
includes 123, 124
62 24P665 FRAME, cart 1
71 LABEL 1
16X364 Ultra 695
16X786 Ultimate 695
72 LABEL 1
16X365 Ultra 695
16X787 Ultimate 695
76 248216 HOSE, suction;
includes 109, 138, 139, 140, 141
77 15D000 CLIP, drain line 1
83 24V026
HOUSING, bearing;
includes 12, 14, 31, 108, 117
84 257185
MOTOR, electric;
includes 126, 127
Ref. Part Description Qty.
85 241008 ROD, connecting;
87 241920 DEFLECTOR, threaded 1
89 287289 GEAR, combination;
includes 43
includes 28, 30
90 287283 HOUSING, drive, M1;
includes 6, 36, 90a
90a 107089 WASHER, race, thrust 1
91 16Y598 PUMP, displacement 695/795 1
93 248217 HOSE, drain;
94 16X904 HOSE, coupled, 1/4 x 15.75 1
99 24A249 HANDLE, cart 1
105 276975 CUP, drain 1
106 15F952 BRACKET, drain cup 1
107 114423 SCREW, mach, hex hd 2
108 16X770 SHIELD, pump rod 1
109 115099 WASHER, garden hose 1
110 16X983 LABEL, Standard Series 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder, hex washer 2
1
126 15D088 FAN, motor 1
127 115477 SCREW, mach, torx, pan hd 1
128▲ 222385 TAG, WARNING (not shown) 1
1
129 HOSE, cpld, 1/4 in. x 50 ft 1
240794 Ultra
826079 Ultimate
138 117559 O-RING 2
139 118505 RING, retaining, external 1
140 15C980 NUT, jam 1
141 15C981 WASHER, suction swivel 1
154 288420 GUN, contractor 1
1
159 278075 BAFFLE 1
160 15Y118 LABEL, Made in USA 1
1
*
253132 KIT, repair, tube, 11 in.
1
▲
Extra Danger & Warning tags & labels available free.
Manual 311861
includes 87
1
1
1
1
332918D 5
695/795/Mark IV Hi-Boy Standard
9 1
24
3 1
62
84
90
90 a
51
83
85
91
76
28
30
89
55
28
108
3 6
6
99
17
58
48
126
127
12
14
24
41
44
43
56
77
106
106
18
109
105
3 7
124
31
31
123
117
10
22
11
8
159
160
31
93
87
71
72
9 4
110
93
129
154
163
154
166
129
164
165
107
ti22892a
Mark IV
Mark IV
695/795
1
2
7
4
5
6
3
8
3
1
1
1
6
3
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
22-28 in-lb (2.4 - 3.1 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
70-80 ft-lb (94.9 - 108.4 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
695/795/Mark IV Hi-Boy Standard
6 332918D
695/795/Mark IV Hi-Boy Standard Parts List
695/795/Mark IV Hi-Boy Standard
Ref. Part Description Qty.
6 15C753 SCREW, mach, torx, hex 5
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11* 119420 WHEEL, pneumatic 2
12 106115 WASH, lock, spring 4
14 110141 SCREW, cap, socket hd 4
17 15C871 CAP, leg 2
18 109032 SCREW, mach, pnh 4
22 116038 WASHER, wave spring 2
24 111040 NUT, hex, flanged 6
28 114672 WASHER, thrust 2
30 114699 WASHER, thrust 1
31 118444 SCREW, machine, hex washer hd 6
36 116191 WASHER, thrust 1
37 100057 SCREW, cap, hex hd 4
41 196178 FITTING 1
43 176817 SPRING, retaining 1
44 176818 PIN, str, hdls 1
48 189920 STRAINER, (1-11 1/2 NPSM) 1
51 24V023 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 192723 NUT, retaining 1
58
SHIELD, motor, painted;
includes 123, 124
287281 695
287282 795/Mark IV
62 24P666 FRAME, cart 1
71 LABEL 1
16X364 Ultra 695
16X367 Ultra 795
16X786 Ultimate 695
16X788 Ultimate 795
16X357 TexSpray Mark IV
72 LABEL 1
16X365 Ultra 695
16X366 Ultra 795
16X787 Ultimate 695
16X789 Ultimate 795
17A135 TexSpray Mark IV
76 248214 TUBE, intake;
77 278204 CLIP, spring 1
83 24V026
HOUSING, bearing;
includes 109
includes 12, 14,
24, 31, 55, 77, 108, 117
84 MOTOR, electric;
257185 695
257186 795/Mark IV
85 241008 ROD, connecting;
87 241920 DEFLECTOR, threaded 1
includes 106, 127
includes 43
Ref. Part Description Qty.
89 287289 GEAR, combination;
includes 28, 30
90 HOUSING, drive, M1;
includes 6, 36, 90a
287283 695
287284 795/Mark IV
90a 107089 WASHER, race, thrust 1
91 PUMP, displacement;
includes 41, 109
16Y598 695/795
16X428 Mark IV
93 244240 HOSE, coupled;
94 16X904 HOSE, coupled, 1/4 x 15.75 1
99 287489 HANDLE, cart 1
105 16X695 HANGER, stand, cart 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer 4
108 16X770 SHIELD, pump rod 1
109 118494 PACKING, o-ring 1
1
110 16X983 LABEL, Standard Series 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder, hex, washer 2
126 15D088 FAN, motor 1
1
127 115477 SCREW, mach, torx, pan, hd 1
128▲ 222385 TAG, WARNING (not shown) 1
129 HOSE, cpld 1
240794 695/795 Ultra
826079 695/795 Ultimate
240797 Mark IV
154 GUN, contractor 1
288420 695/795
246468 Mark IV
159 278075 BAFFLE 1
160 15Y118 LABEL, Made in USA 1
163 241735 HOSE, coupled, 1/4 in. x 3 ft 1
164 159841 BUSHING, 3/8 in. x 1/4 in. 1
165 189018 SWIVEL, assembly 1
166 246215 GUARD, RAC X 1
▲
1
1
1
1
Extra Danger and Warning tags and labels available free.
*
253132 KIT, repair, tube
includes 87
1
1
1
1
332918D 7
1095/1595/Mark V Hi-Boy Standard
62
1 8
18
99
17
106 106
3 7
24
126
127
36
90
90 a
2 8
30
89
28
6
51
71
58
83
12
14
8 5
41
76
48
44
43
107
10
22
11
8
77
108
3 1
159
105
55
23
56
160
31
87
24
117
3 1
113
110
72
84
94
93
93
10 9
91
91
19
129
154
163
154
129
164
165
123
124
ti22893a
Mark V
Mark V
1095/1595
1
2
7
4
6
5
8
3
3
3
1
6
1
1
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
22-28 in-lb (2.4 - 3.1 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
70-80 ft-lb (94.9 - 108.4 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
1095/1595/Mark V Hi-Boy Standard
8 332918D
1095/1595/Mark V Hi-Boy Standard
1095/1595/Mark V Hi-Boy Standard
Ref. Part Description Qty.
6 15C753 SCREW, mach, torx, hex 5
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11* 119509 WHEEL, pneumatic 2
12 106115 WASH, lock, spring 4
14 114666 SCREW, cap, socket hd 4
17 276974 CAP, leg 2
18 108795 SCREW, mach, pnh 4
19 102982 PACKING, o-ring (Mark V) 1
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap, flng hd 2
24 111040 NUT, hex, flanged 6
28 114672 WASHER, thrust 2
30 114699 WASHER, thrust 1
31 118444 SCREW, machine, hex washer hd 8
36 116192 WASHER, thrust 1
37 100057 SCREW, cap, hex hd 4
41 FITTING, pump, quick disc 1
196178 1095/1595
16X834 Mark V
43 119778 SPRING, retaining 1
44 183210 PIN, pump 1
48 189920 STRAINER, (1-11 1/2 NPSM) 1
51 24V024 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 193031 NUT, retaining 1
58 287282 SHIELD, motor, painted;
includes 123, 124
62 24P667 FRAME, cart 1095/1595 1
71 LABEL, UltraMax 1
16X368 Ultra 1095
16X371 Ultra 1595
16X790 Ultimate 1095
16X792 Ultimate 1595
16X360 TexSpray Mark V
72 LABEL, UltraMax II 1095/1595 1
16X369 Ultra 1095
16X370 Ultra 1595
16X791 Ultimate 1095
16X793 Ultimate 1595
16X361 TexSpray Mark V
76 248215 TUBE, intake;
77 278204 CLIP, drain line 1
83 24V027 HOUSING, bearing;
includes 109
includes 12,
14, 24, 31, 55, 77, 108, 113, 117
84 MOTOR, electric;
includes 126, 127
257187 1095
257188 1595
Ref. Part Description Qty.
85 24V021 ROD, connecting;
87 241920 DEFLECTOR, threaded 1
89 287290 GEAR, combination;
includes 43, 44
includes 28, 30
90 HOUSING, drive, M1;
includes 6, 36, 90a
287294 1095
287295 1595/Mark V
90a 194173 WASHER, race, thrust 1
91 PUMP, displacement;
includes 41, 76, 109
16Y706 1095/1595
16X429 Mark V
93 244240 HOSE, drain;
94 HOSE, coupled 1
16X904 1095/1595
24V029 Mark V;
99 24A250 HANDLE, cart 1
105 16X696 HANGER, stand, cart 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer 4
108 16X770 PUMP, shield rod 1
109 118494 PACKING, o-ring 1
1
110 16X983 LABEL, Standard Series 1
113 15C762 SHIELD, pump rod 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder, hex, washer 3
1
126 15D088 FAN, motor 1
127 115477 SCREW, mach, torx, pan, hd 1
128▲ 222385 TAG, WARNING (not shown) 1
129 HOSE, cpld 1
240794 Ultra 1095/1595
826079 Ultimate 1095/1595
240797 Mark V
154 GUN, contractor 1095/1595 1
288420 1095/1595
241705 Mark V
159 278075 BAFFLE 1
160 15Y118 LABEL, Made in USA 1
163 241735 HOSE, cpld, 1/4 in. x 3 ft 1
164 159841 BUSHING, 3/8 in. x 1/4 in. 1
165 189018 SWIVEL, assembly 1
1
▲
1
1
Extra Danger and Warning tags and labels available free.
*
253131 KIT, repair, tube
includes 87
includes 19
1
1
1
1
1
332918D 9
Mark X Standard
62
18
18
99
17
106
84
37
24
126
127
36
90
28
89
30
28
6
58
83
117
12
14
85
91
41e
44
159
105
55
23
56
160
31
87
24
110
43
90a
71
93
72
41a
41d
41d
41f
41b
41
94
19
41c
13 0
129
163
164
166
48
ti22894a
1
2
7
4
5
6
3
8
3
3
1
1
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
55-60 in-lb (6.2 - 6.7 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
22-28 in-lb (2.4 - 3.1 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
70-80 ft-lb (94.9 - 108.4 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
Mark X Standard
124
123
31
10 332918D
Mark X Standard Parts List
Mark X Standard
Ref. Part Description Qty.
6 15C753 SCREW, mach, torx, hex 6
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11* 119509 WHEEL, pneumatic 2
12 112600 WASH, lock, spring 4
14 112599 SCREW, cap, socket hd 4
17 276974 CAP, leg 2
18 108795 SCREW, mach, pnh 4
19 102982 O-RING 1
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap, flng hd 2
24 111040 NUT, lock 6
28 114672 WASHER, thrust 2
30 114699 WASHER, thrust 1
31 118444 SCREW, machine, hex washer hd 6
36 116192 WASHER, thrust 1
37 100057 SCREW, cap, hex hd 4
41 24U755 VALVE, check, quick disc 1
41a 16N461 HOUSING, seat, check valve 1
41b 16X837 HOUSING, ball, check valve 1
41c 24M725 KIT, repair, check valve;
includes 41d, 41e, 41f
41d O-RING 2
41e SEAT 1
41f BALL 1
43 119677 SPRING, retaining 1
44 197443 PIN, pump 1
48 189920 STRAINER, (1-11 1/2 NPSM) 1
51 24V025 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 193394 NUT, retaining 1
58 287282 SHIELD, motor, painted;
includes 123, 124
62 24P667 FRAME, cart 1
71 16X362 LABEL, Mark X 1
72 16X363 LABEL, Mark X 1
77 278204 CLIP, drain line 1
Ref. Part Description Qty.
83 24V028 HOUSING, bearing;
includes 12,
14, 24, 31, 55, 77, 108, 117
84 258909 MOTOR, electric;
includes 125, 126, 127
85 24V022 ROD, connecting;
87 241920 DEFLECTOR, threaded 1
89 288035 GEAR, combination;
includes 43, 44
includes 28, 30
90 287990 HOUSING, drive;
includes 6, 36, 90a
90a 194173 WASHER, race, thrust 1
91 16X425 PUMP, displacement 1
93 244240 HOSE, drain;
94 24V029 HOSE, coupled;
99 24A250 HANDLE, cart 1
105 16X696 HANGER, stand, cart 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer 4
108 16X770 SHIELD, pump rod 1
110 16X983 LABEL, Standard series 1
1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder, hex, washer 3
125 15G845 SPACER, standoff 2
126 15V577 FAN, motor 1
127 122347 SCREW, mach, torx, pan, hd 1
128▲ 222385 TAG, WARNING (not shown) 1
129 278499 HOSE, cpld, 1/2 in. x 50 ft 1
1
130 245820 GUN, spray, texture 1
159 278075 BAFFLE 1
160 15Y118 LABEL, Made in USA 1
163 191239 HOSE, cpld, 3/8 in. x 3 ft 1
164 159239 ADAPTER 2
1
166 246215 GUARD, RAC X 1
▲
Extra Danger and Warning tags and labels available free.
*
253131 KIT, repair, tube
includes 87
includes 19
1
1
1
1
1
1
1
332918D 11
695/795/MARK IV ProContractor
62
8 4
58
126
127
24
103
104
3 7
123
124
10
22
11
8
17
29
3 5
106
107
5
18
159
28
89
30
2 8
36
90
83
85
6
12
14
23
16
39
87
51
3 1
56
55
24
77
3 1
160
9 1
41
108
25
27
109
76
48
110
71
72
93
90 a
15
7
9 4
19
117
9 1
ti22904a
105
See page 20.
Mark IV
1
2
7
4
5
6
3
8
9
10
3
1
1
1
3
6
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
120-130 in-lb (13.5 - 14.6 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
38-42 ft-lb (51.5 - 56.9 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
30-35 in-lb (3.4 - 4.0 N•m)
90-110 in-lb (10.1 - 12.4 N•m)
695/795/MARK IV ProContractor
12 332918D
695/795/MARK IV ProContractor Parts List
695/795/MARK IV ProContractor
Ref. Part Description Qty.
5 16C975 PLATE, pivot 1
6 15C753 SCREW, mach, hex wash hd 5
7 105510 WASHER, lock, spring 2
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11 119420 WHEEL, pneumatic 2
12 106115 WASHER, lock (hi-collar) 4
14 110141 SCREW, cap, sch 4
15 101550 SCREW, cap, sch 2
16 121311 FITTING, connector 1
17 276974 CAP, leg 2
18 260212 SCREW, hex washer hd 2
19 PACKING, o-ring 1
107505 695/795
102982 Mark IV
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap tri lobe 2
24 111040 NUT, lock, nylon, thin pattern 6
25 16X833 FITTING, QD, 695/795 1
27 120583 NUT, hand, 695/795 1
28 114672 WASHER, thrust 2
29 278083 GUIDE, hose, platinum 1
30 114699 WASHER, thrust 1
31 118444 SCREW, mach, slot hex wash hd 5
35 117633 SCREW, slot hex wash hd 2
36 116191 WASHER, thrust, 1095/795 1
37 100057 SCREW, cap, hex hd 4
39 24V095 TUBE, formed, ultra, platinum 1
41 FITTING 1
16Y579 695/795
16X834 Mark IV
48 189920 STRAINER, (1-11 1/2 npsm) 1
51 24V023 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 16X322 CLAMP, pump 1
58 SHIELD, motor, painted;
includes 123, 124
287281 695 Models
287282 795/Mark IV Models
62 24P668 FRAME, platinum, 695/795 1
71 LABEL, brand, front 1
16X364 695 Ultra
16X367 795 Ultra
16X786 695 Ultimate
16X788 795 Ultimate
16X357 Mark IV TexSpray
72 LABEL, brand, side 1
16X365 695 Ultra
16X366 795 Ultra
17A135 Mark IV TexSpray
16X787 695 Ultimate
16X789 795 Ultimate
Ref. Part Description Qty.
76 248214 TUBE, intake;
77 16X203 CLIP, drain line 1
83 24V087 HOUSING, bearing;
includes 109
includes 7, 12,
14, 15, 24, 31, 55, 56, 77, 108, 117
84 MOTOR, electric 1
257185 695 Models
85 24V084 ROD, connecting 1
87 241920 DEFLECTOR, threaded 1
89 287289 GEAR, combination;
257186 795 Models
includes 28, 30
90 HOUSING, drive, M1;
includes 6, 36, 90a
24V032 695 Models
24V033 795/Mark IV
90a 107089 WASHER, race, thrust 1
91 16X414 PUMP, displacement, 695/795;
includes 41, 109
16X418 PUMP, displacement, Mark IV
93 244240 HOSE, drain, ultra hi-boy;
includes 87
94 HOSE, coupled 1
103 287253 TOOL BOX;
104 118852 SCREW, thd forming, hex
105 16X697 HANGER, stand 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer hd 4
108 16X228 PLATE, front, 3900 PC11 1
109 118494 PACKING, o-ring 1
1
110 16X981 LABEL, ProContractor Series 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder 2
1
126 15D088 FAN, motor 1
127 115477 SCREW, mach, torx pan hd 1
128▲ 222385 TAG, warning (not shown) 1
159 278075 BRACKET, wire 1
160 15Y118 LABEL, Made in the USA 1
▲
16X904 695/795
24V029 Mark IV;
includes 19
includes 104
washer hd
Extra Danger and Warning tags and labels available free.
1
1
1
1
1
1
1
3
332918D 13
1095/1595/MARK V ProContractor
62
17
106
84
37
24
126
160
127
36
90 a
2 8
30
89
28
6
51
83
12
14
85
91
91
76
109
48
159
77
87
3 1
124
123
107
105
11
8
10
22
39
23
55
56
108
72
71
5
18
16
24
103
110
3 1
29
35
93
90
104
41
25
27
9 4
19
117
15
7
ti22912a
See page 20.
Mark V
1
2
7
4
6
3
8
9
10
6
1
1
3
3
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
120-130 in-lb (13.5 - 14.6 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
38-42 ft-lb (51.5 - 56.9 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
30-35 in-lb (3.4 - 4.0 N•m)
90-110 in-lb (10.1 - 12.4 N•m)
1095/1595/MARK V ProContractor
14 332918D
1095/1595/MARK V ProContractor Parts List
1095/1595/MARK V ProContractor
Ref. Part Description Qty.
5 16C975 PLATE, pivot 1
6 15C753 SCREW, mach, hex wash hd 5
7 105510 WASHER, lock 2
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11 119509 WHEEL, pneumatic 2
12 106115 WASHER, lock (hi-collar) 4
14 114666 SCREW, cap, socket head 4
15 101550 SCREW, cap, sch 2
16 121311 FITTING, connector 1
17 276974 CAP, leg 2
18 260212 SCREW, hex washer hd 2
19 PACKING, o-ring 1
107505 1095/1595
102982 Mark V
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap tri lobe 2
24 111040 NUT, lock, insert 6
25 16X833 FITTING, quick disconnect,
(1095/1595 only)
27 120583 NUT, hand (1095/1595 only) 1
28 114672 WASHER, thrust 2
29 278083 GUIDE, hose, ultra platinum 1
30 114699 WASHER, thrust 1
31 118444 SCREW, mach, slot hex wash hd 5
35 117633 SCREW, slot hex wash hd 2
36 116192 WASHER, thrust, 1595 1
37 100057 SCREW, cap, hex hd 4
39 24J081 TUBE, formed, ultra, platinum 1
41 FITTING, pump, QD 1
16Y579 1095/1595
16X834 Mark V
48 189920 STRAINER, (1-11 1/2 npsm) 1
51 24V024 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 16X324 CLAMP, pump, large 1
58 287282 SHIELD, motor, painted;
includes 123, 124
62 24P669 FRAME, platinum, 1095/MARK V 1
71 LABEL, brand, front 1
16X368 1095 Ultra
16X371 1595 Ultra
16X360 Mark V TexSpray
16X790 1095 Ultimate
16X792 1595 Ultimate
72 LABEL, brand, side 1
16X369 1095 Ultra
16X370 1595 Ultra
16X361 Mark V TexSpray
16X791 1095 Ultimate
Ref. Part Description Qty.
16X793 1595 Ultimate
76 248215 TUBE, intake;
77 16X203 CLIP, drain line 1
83 24V088 HOUSING, bearing;
includes 109
includes 7, 12,
14, 15, 24, 31, 55, 56, 77, 108, 117
84 MOTOR, electric;
257187 1095 Models
257188 1595/Mark V Models
85 24V085 ROD, connecting 1
87 241920 DEFLECTOR, threaded 1
89 287290 GEAR, combination;
includes 126, 127
includes 28, 30
90 HOUSING, drive, M1;
includes 6, 36, 90a
287294 1095 Models
287295 1595/Mark V Models
90a 194173 WASHER, race, thrust 1
91 PUMP, displacement;
1
16X419 1095/1595 Models
16X421 Mark V Models
93 244240 HOSE, drain;
94 HOSE, coupled 1
16X904 1095/1595
24V029 Mark V;
103 287253 TOOL BOX;
104 118852
105 16X698 HANGER, stand, cart 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer hd 4
108 16X385 PLATE, front, 5900 PCII
109 118494 PACKING, o-ring 1
110 16X981 LABEL, ProContractor Series 1
1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder 3
126 15D088 FAN, motor 1
127 115477 SCREW, mach, torx pan hd 1
1
128▲ 222385 TAG, warning (not shown)
159 278075 BRACKET, wire 1
160 15Y118 LABEL, Made in the USA 1
▲
Extra Danger and Warning tags and labels available free.
includes 41, 76, 109
includes 87
includes 19
includes 104
SCREW, thd forming, hex washer hd
1
1
1
1
1
1
1
1
3
332918D 15
Mark X ProContractor
62
17
106
84
37
24
126
127
36
90 a
2 8
89
30
28
6
12
14
41
48
58
123
125
124
107
10
22
11
8
77
108
3 1
159
55
23
56
160
110
6
103
104
5
18
16
31
35
91
93
87
85
39
71
72
105
19
9 4
41b
41a
41f
41d
41e
41c
18 0
15
7
29
83
117
9 0
ti23015a
1
2
7
4
5
6
3
8
9
10
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
55-60 in-lb (6.2 - 6.7 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
120-130 in-lb (13.5 - 14.6 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
38-42 ft-lb (51.5 - 56.9 N•m)
130-150 in-lb (14.6 - 16.9 N•m)
30-35 in-lb (3.4 - 4.0 N•m)
90-110 in-lb (10.1 - 12.4 3 N•m)
3
1
3
1
1
6
3
See pages 21 and 22.
See page 20.
4
Mark X ProContractor
16 332918D
Mark X ProContractor
Mark X ProContractor
Ref. Part Description Qty.
5 16C975 PLATE, pivot 1
6 15C753 SCREW, mach, hex wash hd 6
7 105510 WASHER, lock, spring 2
8 15E891 CLIP, retaining 2
10 156306 WASHER, flat 2
11 119509 WHEEL, pneumatic 2
12 112600 WASHER, lock (hi-collar) 4
14 112599 SCREW, cap, socket head 4
15 101550 SCREW, cap, sch 2
16 121311 FITTING, connector 1
17 276974 CAP, leg 2
18 260212 SCREW, hex washer, hd 2
19 102982 O-RING 1
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap, tri lobe 2
24 111040 NUT, lock, insert 4
28 114672 WASHER, thrust 2
29 24M197 GUIDE, hose, ultra platinum 1
30 114699 WASHER, thrust 1
31 118444 SCREW, mach, slot hex wash hd 5
35 117633 SCREW, slot hex wash hd 2
36 116192 WASHER, thrust, 1595 1
37 100057 SCREW, cap, hex hd 4
39 16M441 TUBE, formed, ultra, platinum 1
41 24U755 FITTING 1
41a 16N461 HOUSING, seat, check valve 1
41b 16X837 HOUSING, ball, check valve 1
41c 24M725 KIT, repair, check valve;
includes 41d, 41e, 41f
41d O-RING 1
41e SEAT 1
41f BALL 1
48 189920 STRAINER, (1-11 1/2 npsm) 1
51 24V025 COVER, drive, plastic, painted;
includes 31
55 16C457 PACKING, o-ring 1
56 16X324 CLAMP, pump, large 1
58 287282 SHIELD, motor, painted;
includes 123, 124
62 24P669 FRAME, platinum, 1095/MARK V 1
Ref. Part Description Qty.
71 16X362 LABEL, front 1
72 16X363 LABEL, right side 1
77 16X203 CLIP, drain line 1
83 24V089 HOUSING, bearing;
includes 7, 12, 14, 15, 31, 55, 56,
77, 108, 117, 180
84 258909 MOTOR, electric;
includes 125,
126, 127
85 24V086 ROD, connecting 1
87 241920 DEFLECTOR, threaded 1
89 288035 GEAR, combination;
includes 28, 30
90 287990 HOUSING, drive;
includes 6, 36, 90a
90a 194173 WASHER, race, thrust 1
91 16X427 PUMP, displacement 1
93 244240 HOSE, drain;
94 24V029 KIT, hose, cpld, 1/2 in.;
103 287253 TOOL BOX;
104 118852
105 16X698 HANGER, stand, cart 1
106 15C982 CAM, cart 2
107 114531 SCREW, mach, hex washer hd 4
108 16X209 PLATE, front, PCII, 7900 1
110 16X981 LABEL, ProContractor Series 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
1
124 119250 SCREW, shoulder 3
125 15G845 SPACER, standoff 2
126 15V577 FAN, motor 1
127 122347 RING, retaining 1
128▲ 222385 TAG, warning (not shown)
159 278075 BRACKET, wire 1
1
160 15Y118 LABEL, Made in the USA 1
180 112746 NUT, lock, thin pattern 2
▲
1
Extra Danger and Warning tags and labels available free.
SCREW, thd forming, hex washer hd
includes 87
includes 19
includes 104
1
1
1
1
1
1
1
3
332918D 17
1095/1595/Mark V IronMan
127
84
62
17
37
24
126
36
90a
28
30
89
28
6
58
51
83
12
14
85
91
109
76
48
159
77
87
31
124
123
11
8
10
22
23
55
56
108
72
71
24
110
117
160
90
93
94
19
27
25
41
31
7
15
163
163
154
129
13 0
13 0
154
164
165
164
9 1
Ref. Torque
40-45 in-lb (4.5 - 5.0 N•m)
9-11 in-lb (1.0 - 1.2 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
90-110 in-lb (10.1 - 12.4 N•m)
25-30 ft-lb (33.8 - 40.6 N•m)
Mark V
See pages 21 and 22.
1095/1595
ti22929a
1
4
6
1
Mark V
6
1
2
3
3
3
5
1095/1595/Mark V IronMan
18 332918D
1095/1595/Mark V IronMan
1095/1595/Mark V IronMan
Ref. Part Description Qty.
6 15C753 SCREW, mach, torx, hex 5
7 105510 WASHER, lock, spring 2
8 120211 CLIP, retaining 2
10 156306 WASHER, flat 2
11 122267 WHEEL, foam 2
12 106115 WASH, lock, spring 4
14 114666 SCREW, cap, socket hd 4
15 101550 SCREW, cap, sch 2
17 15C871 CAP, leg 2
19 PACKING, o-ring 1
107505 1095/1595
102982 Mark V
22 116038 WASHER, wave spring 2
23 117791 SCREW, cap, flng hd 2
24 111040 NUT, lock, insert 6
25 16X833 FITTING, QD, 3/8 npsm,
1095/1595
27 120583 NUT, hand, 1095/1595 6
28 114672 WASHER, thrust 2
30 114699 WASHER, thrust 1
31 118444 SCREW, machine, hex washer hd 5
36 116192 WASHER, thrust 1
37 100057 SCREW, cap, hex hd 4
41 FITTING, pump, QD 1
16Y579 1095/1595
16X834 Mark V
48 15V573 STRAINER, (1-11 1/2 NPSM) 1
51 24V024 COVER, drive, plastic, painted;
includes 31
55 16C457 HANGER, pail 1
56 16X324 CLAMP, pump, large 1
58 287282 SHIELD, motor, painted;
includes 123, 124
62 16X711 FRAME, cart, 1095/1595 1
71 LABEL, UltraMax 1
16X368 Ultra 1095
16X371 Ultra 1595
16X790 Ultimate 1095
16X792 Ultimate 1595
16X360 TexSpray/Mark V
72 LABEL, UltraMax II, 1095/1595 1
16X369 Ultra 1095
16X370 Ultra 1595
16X791 Ultimate 1095
16X793 Ultimate 1595
16X361 TexSpray Mark V
76 248215 TUBE, intake;
77 16X203 CLIP, drain line 1
83 24V088 HOUSING, bearing;
includes 109
includes 7, 12,
14, 15, 24, 31, 55, 56, 77, 108, 117
84 MOTOR, electric;
257187 1095
257188 1595/Mark V
includes 126, 127
Ref. Part Description Qty.
85 24V085 ROD, connecting 1
87 241920 DEFLECTOR, threaded 1
89 287290 GEAR, combination;
includes 28, 30
90 HOUSING, drive, M1;
includes 6, 36, 90a
287294 1095
287295 1595/Mark V
90a 194173 WASHER, race, thrust 1
91 PUMP, displacement 1
16X420 1095/1595;
16Y599 Mark V
93 244240 HOSE, drain;
94 HOSE, coupled 1
16X904 1595/1595
1
108 16X385 PLATE, front, 5900, PCII
109 118494 PACKING, o-ring 1
110 16X982 LABEL, IronMan series 1
117 187437 LABEL, torque 1
123 276980 GROMMET, cover 2
124 119250 SCREW, shoulder, hex, washer 3
126 15D088 FAN, motor 1
127 115477 SCREW, mach, torx, pan, hd 1
128▲ 222385 TAG, WARNING (not shown) 1
129 HOSE, cpld, 1/4 in. x 50 ft 1
1
130 HOSE, cpld, 3/8 in. x 50 ft
1
154 GUN 1
159 278075 BRACKET, wire
160 15Y118 LABEL, Made in USA 1
163 HOSE, coupled 1
164 FITTING 1
165 189018 SWIVEL, assembly 1
▲
1
1
1
24V029 Mark V;
240794 1095/1595 Ultra
826079 1095/1595 Ultimate
240797 1095/1595/Ultra 1
240797 Mark V 2
826080 1095/1595 Ultimate 1
246240 1095/1595
241705 Mark V
277322 1095/1595
241735 Mark V
164672 1095/1595
159841 Mark V
Extra Danger and Warning tags and labels available free.
includes 41, 109
includes 87
includes 19
1
1
1
332918D 19
Hose Reel and Gun
129
156
154
156 156
173
172
170
171
18 0
99
163
164
168
183
169
42
201
174 174
167
39
16
18
5
155
154
129
179
178
154
129
155
21 9 179
ti14917b
695/795/1095/1595
Mark IV / Mark V
Mark X
1
2
3
4
Ref. Torque
130-150 in-lb (14.6 - 16.9 N•m)
25-35 ft-lb (33.8 - 47.4 N•m)
120-130 in-lb (13.5 - 14.6 N•m)
38-42 ft-lb (51.5 - 56.9 N•m)
Hose Reel and Gun
Parts List
Ref. Part Description Qty.
5 16C975 PLATE, Pivot Mount 1
16 121311 FITTING, Connector, NPT x JIC 1
18 260212 SCREW, Hex Washer HD 2
39 TUBE, Formed, Ultra, Platinum 1
24V095 695/795 Models
24J081 1095/Mark V Models
16M441 Mark X
42 ADAPTER 1
164672 695/795/1095/1595
196178 Mark IV/Mark V
159239 Mark X
99 24B691 REEL, hose, ultra 1
129 HOSE, coupled
240794 695/795/1095/1595 Ultra 2
826079 695/795/1095/1595 Ultimate 2
245225 Mark IV/Mark V 2
278499 Mark X 2
154 GUN, spray
288420 695/795/1095/1595 Ultra 1
826085 695/795/1095/1595 Ultimate 1
241705 Mark V Models 1
246468 Mark IV Models 1
245820 Mark X 1
Ref. Part Description Qty.
155 HOSE, whip 1
241735 Mark IV, Mark V
191239 Mark X
156 ADAPTER 1
162453 695/795/1095/1595
196178 Mark IV/Mark V
158491 Mark X
163 24B248 CAP, swivel, complete 1
164 122347 RING, retaining, external 1
167 122534 SPRING, wave 1
168 24E400 PIN, pop, lock out 1
169 122524 RING, retaining, external 1
170 278085 HANDLE, swivel 1
171 122518 PIN 1
172 15X618 NUT, pin 1
173 122542 SPRING 1
174 122607 WASHER, flat 2
178 189018 SWIVEL 1
179 BUSHING
159841 Mark IV/Mark V 1
159239 Mark X 2
180 122669 WASHER 1
183 122787 CAP 1
201 24E016 TUBE, Hose Reel, Pivot 1
20 332918D
Control Box
52
33
34
115
73
177
49
63
9 6
65
75
70
38
82
45
3 2
150
148
26
142
1 3 1
59
144
143
60
13 1
52
23
68
ti22914a
1
2
4
5
6
3
2
7
Ref. Torque
10-15 in-lb (1.1 - 1.7 N•m)
40-45 in-lb (4.5 - 5.0 N•m)
22-28 in-lb (2.4 - 3.1 N•m)
200-230 in-lb (22.6 - 25.9 N•m)
30-35 in-lb (3.3 - 3.9 N•m)
15-20 in-lb (1.7 - 2.2 N•m)
2-3 in-lb (0.2 - 0.4 N•m)
Control Box
Parts List
Ref. Part Description Qty.
23 117791 SCREW, cap, flange head 2
26 114391 SCREW, grounding 1
32 115522 SCREW, mach, pnh
33 15C979 SWITCH, rocker 1
15D527 SWITCH, rocker, Mark X 1
34 116167 KNOB, potentiometer 1
38 16V095 SCREW, #10, taptite phil 4
45 119541 SWITCH, toggle,
49 195428 BOOT, toggle
52 CONTROL, board;
24P847 120V Models
24P848 240V Models
59▲ 16T784 LABEL, warning, domestic 1
60 16T541 JUMPER WIRE 1
63 16X796 LABEL, LCD, GMAX
16Y785 LABEL, control box cover, ultra
65 16X797 LABEL, control box cover, ultra
68 16Y789 LABEL, control
16Y786 LABEL, control
70 122507 SWITCH, reed
(ProContractor/IronMan series)
(ProContractor/IronMan series)
(ProContractor/IronMan series)
includes 23, 26, 60, 131, 142, 144
(ProContractor/IronMan series)
(Standard series)
(ProContractor/IronMan series)
(ProContractor/IronMan series)
(Standard series)
(ProContractor/IronMan series)
Ref. Part Description Qty.
16Z019 LIGHT, ProGuard (Standard series) 1
73 100187 NUT 1
75 CORD, power 1
3
15H064 120V Models 695, 795, 1095, Mark IV
15H065 120V Models 1595, Mark V
15R876 Mark X
15H066 120V CSA Models 1595, Mark V
82 256219 POTENTIOMETR, assembly 1
1
1
24V061 ProContractor/IronMan series;
24V062 Standard series;
115 15C973 GASKET 1
131 16T482 RIVET, snap 2
96
1
COVER, control
includes 32, 38, 63, 65, 68
includes 38, 63, 68
1
142 SWITCH/PLUG 1
16T483 695/795/1095/Mark IV/Mark X
120059 1595/Mark V
143 15G935 CONNECTOR, electrical (1595/Mark V) 1
1
144 STRAIN RELIEF 1
1
1
1
1
16T547 695/795/1095/Mark IV
116171 1595/Mark V/Mark X
148 24V030 KIT, repair, coil;
150 16U215 SCREW, machine, flat head 1
177 16Y791 LABEL, blank, elec, std (Standard) 1
16Y790 ProContractor/IronMan 1
16Y788 Mark X ProContractor 1
▲
Extra Danger and Warning tags and labels available free.
includes 150
1
1
332918D 21
Filter
67
1 3
1 3
189
20
20
40
118
42
39
114
66
9
74
81
86
50
21
21
92
80
80
172
174
173
8 1
50
13
ti22913a
Mark X
4
1
2
7
5
6
3
Ref. Torque
90-110 in-lb (10.1 - 12.4 N•m)
35-45 ft-lb (47.4 - 61.0 N•m)
190-210 in-lb (21.4 - 23.7 N•m)
100-120 in-lb (11.2 - 13.5 N•m)
38-42 ft-lb (51.5 - 56.9 N•m)
15-25 in-lb (1.6 - 2.8 N•m)
365-385 in-lb (41.2 - 43.5 N•m)
Filter
Parts List
Ref. Part Description Qty.
9 117285 PACKING, o-ring 1
13 16U013 SCREW, cap, socket head 3
20 111457 PACKING, o-ring 1
21 15C972 PIN, grooved 1
116424 NUT, Mark X 1
39 TUBE, formed 1
24V095 695/795 Models
24J081 1095/Mark V Models
16M441 Mark X
40 121889 GROMMET, transducer 1
42 FITTING 1
122533 1095/1595/Mark V
125926 695/795/Mark IV/Mark X
(ProContractor series)
(ProContractor series)
164672 695/795/1095/1595 (Standard series)
196178 Mark IV/Mark V (Standard series)
1095/1595/Mark V (IronMan series)
183285 Mark X (Standard series)
50 KIT, handle;
24E233 ProContractor/IronMan Series
24E234 Standard Series
15G563 Mark X
66 15C765 CAP, filter 1
22 332918D
includes 21, 81
Ref. Part Description Qty.
67 16T543 BASE, filter 1
74 15C766 TUBE, diffusion 1
80 24B156 VALVE, prime, HD 1
81 BASE, valve 1
86 243222 TRANSDUCER, pressure control;
92 FILTER, fluid 1
114 104813 PLUG, pipe 1
118 125926 FITTING, elbow 1
172 193709 SEAT, valve 1
173 193710 SEAL, seat, valve 1
174 245103 KIT, repair, valve, Mark X;
1
189 17A197 GUARD, base, filter (ProContrac-
287879 VALVE, prime, Mark X 1
24A382 Standard series
24D286 ProContractor/IronMan
114708 Mark X
includes 20
244071 30 mesh
244067 60 mesh, original equipment
244068 100 mesh
244069 200 mesh
includes 21, 50, 80, 81, 172, 173
tor/IronMan Series)
1
1
Notes
Notes
332918D 23
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedi
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
ngs entered into,
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
O r iginal ins truc tions.
This manual contains English. MM 332918
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
Revision D - April, 2014