Installation
LineLazer lV
Second Gun Kit 287553
3300 psi (22.8 MPa, 228 bar) Maximum Working Pressure
311066C
ENG
ti6545a
Important Safety Instructions
Read all instructions and warnings in manuals 311020,
311021, or 313775. Save these instructions.
Relieve pressure. Refer to
your sprayer manual.
ti6657a
ti6654a
1 Install extension clamp (10)
and extension support
bracket (12))
ti6658a
ti6655a
a Pull out existing gun arm
support bracket
ti6659a
ti6656a
b Slide extension clamp onto
existing gun arm support
bracket
ti6660a
c Install existing gun support
bracket.
ti6661a
5 Insert gun cable in gun
selector plate
2 Install extension support
bracket (12). Tighten extenÂsion clamp (10).
3 Route gun cable (1) up to
cable bracket on handle
bar. Remove knurled nut
4 Insert gun cable through
cable bracket. Install and
tighten knurled nut.
near end of gun cable.
ti6665a
ti6662b
ti6663a
6 Remove plug from filter. 7 Connect paint hose to filter. 8 Adjust cable and gun trig-
ger so both guns trigger at
the same time.
2 311066C
ti6664a
a
1
b
ti3331a
ti3342a
ti3332a
c
ti6549a
1 Align guns 2 Position guns: up/down,
forward/reverse, left right
2
ti3330a
3 Connect gun cables to left
or right, or both, selector
plates
a One gun: Disconnect one
gun selector plate from trigÂger.
b Both guns simultaneously:
Adjust both gun selector
plates to the same position.
c Solid-skip and skip-solid:
Adjust solid-line gun to
position 1 and skip-line gun
to position 2.
311066C 3
1
13
9
23
4
10
12
8
2
22
ti6546b
11
5f
3
5a
Ref Part Description Qty
1 287696 CABLE, gun 1
2 15F212 ARM, holder, gun 1
3 119648 SCREW, mch, trsshd, cross recess 1
4 287566 KIT, clamp 1
5 287570 HOLDER, gun; includes 5a - 5f 1
5a 102040 NUT, lock 4
5b 15F209 STUD, trigger pull 1
5c 15F214 LEVER, actuator 1
5d 15F211 STUD, cable 1
5e 15F210 STUD, pivot 1
5f 287569 HOLDER, GUN 1
6 119647 SCREW, cap, socket, flthd 2
7 15F213 BRACKET, cable 1
6
5c
5d
7
5e
5a
5b
5
Ref Part Description Qty
8 111145 KNOB, pronged 1
9 188135 GUIDE, cable 1
10 224136 CLAMP, extension 1
11 248157 GUN, flex, basic 1
12 224096 BRACKET, support, extension 1
13 245798 HOSE, 1/4 in. X 7 ft 1
22 15F624 NUT, cable, gun (knurled) 2
23 196177 FITTING, adaptor 1
4 311066C
311066C 5
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 311066
Graco Headquarters: Minneapolis
International Offices: Belgium, Korea, China, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2005, Graco Inc. is registered to ISO 9001
http://www.graco.com
Revised 01/2011
6 311066C
Loading...