Graco 307005E User Manual
Instructions - Parts List
KEEP FOR REFERENCE
High Pressure Swivels
Models 207947, 196337, 207948: 6000 psi (41 MPa, 414 bar) Maximum Working Pressure
Models 207946, 24P834: 6500 psi (45 MPa, 448 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
WARNING
Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely
serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also
cause serious injury.
INSTRUCTIONS
D Do not exceed the maximum working pressure of the swivels.
307005E
EN
D Always relieve pressure before removing, checking, or servicing the swivels.
D Do not stop or deflect leaks with your hand, body, glove or rag.
Model 207946, Series B and
Model 24P834, Series A
Straight Swivel; 3/8 npt(f) x 1/2 npsm(f)
REF. PART NO. DESCRIPTION QTY
1 102918 SEAL, polyurethane (207946 only) 1
111689 SEAL, PTFE (24P834 only) 1
2 168667 WASHER 1
3 168666 HOUSING, seal;
1-20 UNEF-2A(m) x 3/8-18 npt(f) 1
Model 207947, Series B and
Model 196337, Series A
Straight Swivel; 1/2 npt(m) x 1/2 npt(f)
REF. PART NO. DESCRIPTION QTY
1 102918 SEAL, polyurethane (207947 only) 1
111689 SEAL, PTFE (196337 only) 1
2 168667 WASHER 1
3 168670 HOUSING, seal;
1-20 UNEF-2A(m) x 1/2-14 npt(m) 1
3/8 npt(f)
1/2 npt(m)
1/2 npsm(f)
2
1
3
01377
Install seal (1) with
“V” facing into seal
housing (3).
2
1
3
01380
1/2 npt(f)
01373
PROVEN QUALITY. LEADING TECHNOLOGY.
OPTIONAL PTFE SEAL 111689
with stainless steel spring
For use with straight swivels 207946 and 207947 to
replace the polyurethane seal.
STRAIGHT SWIVEL SERVICE
To replace the seal (1), unscrew the seal housing (3) and
remove the seal and back-up washer (2). Lubricate the
new seal with No. 2 lithium base grease and install as
shown above.
Unscrew the seal housing (4) and remove the seal (1)
and washer (3).
Lubricate the new seals with No. 2 lithium base grease
and assemble as shown at right.
Install seal (1) with
“V” facing into seal
housing (4).
01380
Model 207948, Series B
Zee Swivel; 1/2 npt(f) x 1/2 npt(m)
REF PART NO. DESCRIPTION QTY
1 102918 SEAL; polyurethane 5
2 102919 RING, retaining 2
3 168667 WASHER 5
4 168671 HOUSING, seal 1
5 168672 STUD, swivel 1
6 168673 COUPLING, swivel; 1/2-14 npt(m) 1
ZEE SWIVEL SERVICE
To replace the seal, remove the retaining ring (2) from the
swivel stud (5). Pull the swivel coupling (6) from the swivel stud (5). Remove the seals (1) and washers (3).
Remove the retaining ring (2) from the seal housing (4).
Pull the swivel stud (5) from the seal housing (4). Remove
the seals (1) and washers (3).
2
1/2 npt(m)
5
1/2 npt(f)
2
3
01375
01379
3
1
4
3
1
3
1
3
6
Install seals (1) with
“V” facing in direction
shown.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612–623–6928 or Toll Free: 1–800–533–9655, Fax: 612–378–3590
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 307005
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES S P.O. BOX 1441 S MINNEAPOLIS MN 55440–1441 S USA
Copyright 1992, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
2 307005
Graco Headquarters: Minneapolis
www.graco.com
Revised January 2013
Loading...