Page 1
Instructions/Parts
Electric
Electric Electric
Low
shear,
Low Low
shear, shear,
stored
stored stored
Seepage3foracompletelistofmodel
descriptionsandpartnumbers.
in ininuid uid
Important
Important Important
Readallwarningsandinstructionsinthismanualandassociated
componentmanuals.Saveallinstructions.
Direct
Direct Direct
electric,
electric, electric,
uid
tanks.
tanks. tanks.
direct
direct direct
For
For For
Safety
Safety Safety
Drive
Drive Drive
Agitators
Agitators Agitators
3A4553F
EN
drive
agitator
drive drive
agitator agitator
professional
professional professional
Instructions
Instructions Instructions
for
mixing
for for
mixing mixing
use
only.
use use
only. only.
and
maintaining
and and
maintaining maintaining
suspension
suspension suspension
of
industrial
of of
industrial industrial
coatings
coatings coatings
PROVENQUALITY.LEADINGTECHNOLOGY.
Page 2
Contents
Contents Contents
RelatedManuals................................................2
Models...............................................................3
Warnings...........................................................4
Installation..........................................................6
ShaftandImpellerSize................................6
Optional4.8to1GearReducerKits..............6
Motor,BearingHousing,andImpeller
Installation......................................7
VFD............................................................8
ConnectVFDtoMotor..................................8
GroundingtheAgitator.................................8
GearReducerKitInstallation........................9
Operation...........................................................10
GeneralOperation.......................................10
FindingtheProperAgitatorSpeed................10
Maintenance......................................................11
Related
Related Related
ManualNumberTitle
3A4793
Manuals
Manuals Manuals
VFD(VariableFrequencyDrive)
RoutinePeriodicMaintenance......................11
CheckScrewandBoltTightness...................11
Bearings......................................................11
GearReducer..............................................11
Service..............................................................12
ShaftSealRemovalandReplacement...........12
Parts..................................................................13
Models25C454and25C463........................13
Models25C453,25C575,25C464,
25C576..........................................15
Models25C462,25C470,25C471,
25C465,25C472,25C473...............17
Dimensions........................................................19
PowerUsageCharts...........................................20
TechnicalSpecications......................................22
308369
CardP/N4054Leeson
Numero:UM-3.1
5,10,and15GallonPressureTanks
®
ElectricCorporation,GeneralInstallationandOperatingInstructions(forUL
Listedmotors)
cempFlameproofElectricMotors,ATEXsafetyinstructions
2
3A4553F
Page 3
Models
Models Models
TheElectricDirectDriveAgitatorrequirespowerfromavariablefrequencydrive(VFD)tocontrolspeedandisnot
tobeusedwithoutone.Seemanual3A4793foralistingofpartnumbersforrelatedVFDcontrols,tobeordered
separately.
Models
Table
Table Table
Table
Table Table
UL
Listed
1 11UL UL
Part
No.
Part Part
No. No.
25C453
25C575
25C454
25C462*PressureTankAgitatorAssembly(5Gallon)
25C470*PressureTankAgitatorAssembly(10Gallon)
25C471*PressureTankAgitatorAssembly(15Gallon)
ATEX
2 22ATEX ATEX
Part
No.
Part Part
No. No.
25C464
25C576
25C463
25C465*PressureTankAgitatorAssembly(5Gallon)
Explosion
Listed Listed
Explosion Explosion
Description
Description Description
+
3"Quick-clampFlangeMountAgitatorMotor
+
4”Quick-clampFlangeMountAgitatorMotor
+
7.5"ODFlangeMountAgitatorMotor(3"150#ANSIFlange
MountingHoles)
Listed
Explosion
Listed Listed
Explosion Explosion
Description
Description Description
+
3"Quick-clampFlangeMountMotor
+
4”Quick-clampFlangeMountMotor
+
7.5"ODFlangeMountMotor(3"150#ANSIFlangeMounting
Holes)
Proof
Inverter
Proof Proof
Inverter Inverter
Proof
Inverter
Proof Proof
Inverter Inverter
Duty
Motor
Duty Duty
Motor Motor
Motor
Hazardous
Motor Motor
Hazardous Hazardous
Approvals
Approvals Approvals
Duty
Motor
Duty Duty
Motor Motor
Agitator
Agitator Agitator
Location
Location Location
Approvals
Approvals Approvals
25C472*PressureTankAgitatorAssembly(10Gallon)
25C473*PressureTankAgitatorAssembly(15Gallon)
+
Doesnotcomewithshaftorimpeller.SeeShaftandImpellerSize,page6forpropershaftlengthandimpeller
diameterpartnumbers,tobeorderedseparately.
*Thesemodelsincludeashaftandimpeller,butdonotincludepressuretanks.Thesemodelsareforthereplacement
ofexistingairmotordrivenpressuretankagitators.Seemanual308369forcorrespondingpressuretankpart
numbers,tobeorderedseparately.
Optional
Optional Optional
OptionalgearreducerkitsareavailableforboththeULandATEXmotors.
SeeOptional4.8to1GearReducerKits,page6formoreinformation.
Gear
Gear Gear
Reducer
Reducer Reducer
Kits
Kits Kits
3A4553F3
Page 4
Warnings
Warnings
Warnings Warnings
Thefollowingwarningsareforthesetup,use,grounding,maintenance,andrepairofthisequipment.Theexclamation
pointsymbolalertsyoutoageneralwarningandthehazardsymbolsrefertoprocedure-specicrisks.Whenthese
symbolsappearinthebodyofthismanual,referbacktotheseWarnings.Product-specichazardsymbolsand
warningsnotcoveredinthissectionmayappearthroughoutthebodyofthismanualwhereapplicable.
DANGER
DANGER DANGER
HIGH
VOLTAGE
HIGH HIGH
VOLTAGE VOLTAGE
Thisequipmentuseshighvoltagepower.Impropercontactwithhighvoltageequipment
willcausedeathorseriousinjury.
•Turnoffanddisconnectpoweratmainswitchbeforedisconnectinganycablesandbefore
servicingequipment.
•Thisequipmentmustbegrounded.Connectonlytogroundedpowersource.
•Allelectricalwiringmustbedonebyaqualiedelectricianandcomplywithalllocalcodes
andregulations.
ELECTRIC
ELECTRIC ELECTRIC
SHOCK
SHOCK SHOCK
HAZARD
HAZARD HAZARD
WARNING
WARNING WARNING
FIRE
AND
FIRE FIRE
Flammablefumes,suchassolventandpaintfumes,inwork work
solventowingthroughtheequipmentcancausestaticsparking.Tohelppreventreandexplosion:
•Useequipmentonlyinwellventilatedarea.
•Eliminateallignitionsources;suchaspilotlights,cigarettes,portableelectriclamps,andplastic
dropcloths(potentialstaticarc).
•Groundallequipmentintheworkarea.SeeGrounding Grounding
•Neversprayorushsolventathighpressure.
•Keepworkareafreeofdebris,includingsolvent,ragsandgasoline.
•Donotplugorunplugpowercords,orturnpowerorlightswitchesonoroffwhenammable
fumesarepresent.
•Useonlygroundedhoses.
•Holdgunrmlytosideofgroundedpailwhentriggeringintopail.Donotusepaillinersunlessthey
areantistaticorconductive.
Stop
•Stop Stop
youidentifyandcorrecttheproblem.
•Keepaworkingreextinguisherintheworkarea.
EXPLOSION
AND AND
EXPLOSION EXPLOSION
operation
operation operation
immediately
immediately immediately
HAZARD
HAZARD HAZARD
work
area
area area
canigniteorexplode.Paintor
Grounding
ifstaticsparkingoccursoryoufeelashock,Donotuseequipmentuntil
instructions.
4
3A4553F
Page 5
WARNING
WARNING WARNING
EQUIPMENT
EQUIPMENT EQUIPMENT
Misusecancausedeathorseriousinjury.
•Donotoperatetheunitwhenfatiguedorundertheinuenceofdrugsoralcohol.
•Donotexceedthemaximumworkingpressureortemperatureratingofthelowestratedsystem
component.SeeTechnical Technical
•Useuidsandsolventsthatarecompatiblewithequipmentwettedparts.SeeTechnical Technical
equipmentmanuals.Readuidandsolventmanufacturer’swarnings.Forcompleteinformation
aboutyourmaterial,requestSDSfromdistributororretailer.
•Donotleavetheworkareawhileequipmentisenergizedorunderpressure.
•Checkequipmentdaily.Repairorreplacewornordamagedpartsimmediatelywithgenuine
manufacturer’sreplacementpartsonly.
•Donotalterormodifyequipment.Alterationsormodicationsmayvoidagencyapprovalsand
createsafetyhazards.
•Makesureallequipmentisratedandapprovedfortheenvironmentinwhichyouareusingit.
•Useequipmentonlyforitsintendedpurpose.Callyourdistributorforinformation.
•Routehosesandcablesawayfromtrafcareas,sharpedges,movingparts,andhotsurfaces.
•Donotkinkoroverbendhosesorusehosestopullequipment.
•Keepchildrenandanimalsawayfromworkarea.
•Complywithallapplicablesafetyregulations.
MOVING
MOVING MOVING
Movingpartscanpinch,cutoramputatengersandotherbodyparts.
MISUSE
MISUSE MISUSE
PARTS
PARTS PARTS
HAZARD
HAZARD HAZARD
Technical
HAZARD
HAZARD HAZARD
Data
Data Data
inallequipmentmanuals.
Technical
Warnings
Data
Data Data
inall
•Keepclearofmovingparts.
•Donotoperateequipmentwithprotectiveguardsorcoversremoved.
•Beforechecking,moving,orservicingequipment,disconnectallpowersources.
TOXIC
TOXIC TOXIC
Toxicuidsorfumescancauseseriousinjuryordeathifsplashedintheeyesoronskin,inhaled,or
swallowed.
•ReadSafetyDataSheet(SDS)toknowthespecichazardsoftheuidsyouareusing.
•Storehazardousuidinapprovedcontainers,anddisposeofitaccordingtoapplicableguidelines.
BURN
BURN BURN
Equipmentsurfacesanduidthatisheatedcanbecomeveryhotduringoperation.Toavoidsevere
burns:
•Donottouchhotuidorequipment.
PERSONAL
PERSONAL PERSONAL
Wearappropriateprotectiveequipmentwhenintheworkareatohelppreventseriousinjury,including
eyeinjury,hearingloss,inhalationoftoxicfumes,andburns.Protectiveequipmentincludesbut
isnotlimitedto:
FLUID
FLUID FLUID
HAZARD
HAZARD HAZARD
OR
FUMES
OR OR
FUMES FUMES
PROTECTIVE
PROTECTIVE PROTECTIVE
EQUIPMENT
EQUIPMENT EQUIPMENT
•Protectiveeyewearandhearingprotection.
•Respirators,protectiveclothing,andglovesasrecommendedbytheuidandsolventmanufacturer.
3A4553F5
Page 6
Installation
Installation
Installation Installation
Shaft
Shaft Shaft
Flange-mountedandquick-clampangemounted
agitatorsneedshaftsandblades.Seebelow
todeterminethelengthoftheshaftandthe
recommendedimpellerdiameter.
Table
Table Table
Impeller
Impeller Impeller
Number
Number Number
17N704
17N708
17N712
*Recommendedimpellerbladediameterisgenerally
determinedbytakingtheinsidedimensionofthe
tank,drum,orvessel(TinFigure1)andmultiplying
by0.35.
**Speedislimitedbymaterialviscosityand
tankdiameterfor12”(30cm)impeller.See
FindingtheProperAgitatorSpeed,page10.
Todeterminetheshaftlength(“A”inTable4):
1.Findthedistancefromthebottomofthetankup
2.Fromthatpoint,measuretothelidmounting
3.Addmeasurementinstep2(L)tothelengthof
Example:Shaftlength“A”=L+5inches(127mm).
NOTE:Roundeachmeasurementupordownto
nearestshaftlengthinTable4.
and
Impeller
and and
Impeller Impeller
Recommended
3 33Recommended Recommended
Inside
Kit
Kit Kit
1/2theimpellerdiameter(i.e.,2”,4”,or6”)(See
0.5DinFigure1).
surface(L).
thebearinghousing(5”or127mm).
Inside Inside
Diameter
Diameter Diameter
12"(30cm)orless4"(10cm)
12"(30cm)to
22"(56cm)
22"to36”
(56to91.5cm)
Size
Size Size
Impeller
Impeller Impeller
Tank
Tank Tank
“T”
“T” “T”
Diameter*
Diameter* Diameter*
Stainless
Stainless Stainless
Impeller
Impeller Impeller
8"(20cm)
12"(30cm)**
Steel
Steel Steel
Diameter
Diameter Diameter
“D”
“D” “D”
Figure1MeasureforShaftLength
Table
Table Table
Shaft
Shaft Shaft
Part
Part Part
17P005
17P006
17P007
17P008
17P009
17P010
17P011
17P012
17P013
17P014
Optional
Optional Optional
•UseKit25N644formountingontoULlistedmotor
•UseKit25N645formountingontoATEXlisted
Shaft
4 44Shaft Shaft
No.
No. No.
assemblies(seeTable1ULListedExplosionProof
InverterDutyMotor,page3).
motorassemblies(seeTable2ATEXListed
ExplosionProofInverterDutyMotor,page3).
Length
Length Length
Length
Length Length
54(137)
52(132)
50(127)
48(122)
46(117)
44(112)
42(107)
40(101)
4.8
4.8 4.8
Part
Numbers
Part Part
Numbers Numbers
Part
“A”
“A” “A”
(cm)
in inin(cm) (cm)
38(97)
36(91)
to
Gear
to to
1 11Gear Gear
No.
Part Part
No. No.
17P015
17P016
17P017
17P018
17P019
17P020
17P021
17P022
17P023
Reducer
Reducer Reducer
Length
Length Length
18(46cm)
“A”
“A” “A”
(cm)
in inin(cm) (cm)
34(86)
32(81)
30(76)
28(71)
26(66)
24(61)
22(56)
20(51)
Kits
Kits Kits
Kitsincludethegearreducerandmounting
hardware.Toinstallandmountthegearreducer,see
GearReducerKitInstallation,page9.
63A4553F
Page 7
Installation
Motor,
Motor, Motor,
Installation
Installation Installation
Allelectricalwiringmustbedonebyaqualied
electricianandcomplywithalllocalcodesand
regulations.Onlytrainedandqualiedpersonnel
whohavereadandwhounderstandtheinformation
inthismanualshouldinstallthisequipment.
Alwaysmaintainaminimumof1in.(25.4mm)
clearancebetweenrotatingagitatorpartsand
containertopreventsparksfromcontact.
Personalinjuryorequipmentdamagemayresult
fromlifting/fallingheavyequipment.Toavoid
personalinjuryorequipmentdamage:
•Donotliftthedrumcoverandagitatorwithout
•Donotwalkorstandbeneatharaisedelevator.
Forbestresults,donotremoveanyprotective
wrappingsfromanyoftheagitatorpartsuntiljust
priortoassemblyandinstallation.Storeallparts
indoors,incleandryair.
Figure2showstheholesforinstallingagitatoranges
(partnumbers25C454and25C453)tothemounting
surface.Holesrequiredinthemountingsurfaceare:
Shaft
Shaft Shaft
Mounting
Mounting Mounting
•(3)holestomounttoGracodrumlidsthathave
mountingsurfaceforback-gearagitatorhousings.
•(4)holesfor3"150#ANSIangepattern(6"
diameterboltcircle).Thispatternisfornew
installations.
•(4)holesformountingtoanexistingGracoLSA
suppliedagitatormountingpattern(6.25"diameter
boltcircle).
Bearing
Bearing Bearing
properassistance
hole:
hole: hole:
1"-2"(2.54cm-5.08cm)
the
ange
the the
ange ange
Housing,
Housing, Housing,
(3
methods):
(3 (3
methods): methods):
and
Impeller
and and
Impeller Impeller
NOTE:Eyebolts(26)areshippedloosetobe
attachedforliftingtheagitator.Seeattachment
location(Parts,page13).
1.Installbearinghousing/angeassemblyperthe
following:
a.Forangemount:See
Models25C454and25C463,page13for
partsidentication.Placegasket(20)and
bearinghousing/angeassembly(A)ontank
cover.Installatwashers,mountingbolts,
andnuts(notprovided).Tightensecurely.
b.Forquick-clampangemount:See
Models25C453,25C575,25C464,25C576,
page15forpartsidentication.Place
bearinghousing/angeassembly(A)on
topofquick-clampgasket(notprovided)
andexistingquick-clampangeontank.
Attachwithclamp(notprovided)andtighten
securely.
c.Forpressuretank:SeeModels25C462,
25C470,25C471,25C465,25C472,25C473,
page17forpartsidentication.Placegasket
(21)andbearinghousing/angeassembly
(A)onpressuretankcover.Installand
securewithlockwasher(32)andnut(22).
Tightensecurelytopreventassemblyfrom
rotating.
2.Installtheretainingring(6)inthemachinedslot
intheagitatorshaft(24).
3.Slideshaftthroughthebearinghousing/ange
assemblyfromthetopsideofthebearinghousing
untiltheretainingringrestsontheupperbearing.
4.Slidetheimpeller(23)(seeFigure3)ontothe
shaft(24)sothebladeispushingmaterialdown
withthebladeturningclockwisewhenviewed
fromabove.Shaftcanbemovedupanddownin
thebearinghousingtoinstalltheimpeller.
5.Positiontheimpelleralongtheshaftasrequired:
Thedistancefromthetankbottomtothelowest
impellerblade(BB)shouldbe1/2to1–1/2times
theimpellerbladediameter(bladediameteris
determinedbymeasuringthedistancefromthe
tipoftheimpellertotheshaftcenter(AA)and
multiplyingbytwo).
Figure2AgitatorMountingHoleDimensions
Motorandbearinghousingweighapproximately50
lbs(22.6kg).Verifythatadequatepersonnelare
availableorasecureliftingdeviceisavailableforuse
inpositioningandinstalling.
3A4553F
Figure3ImpellerInstallation
6.Securetheimpellerbytighteningthesetscrews
(23a).SeeParts,page13.
7.Placecoupling(7)ontoagitatorshaftabovethe
retainingringandtightensetscrew(7a)securely.
8.Placespiderdiskcoupling(8)ontop.
7
Page 8
Installation
9.ForULmotors:Fastenmotorange(10)to
bearinghousingwith4capscrews(5).
ForATEXmotors:Placetheadapter(28)on
themotorshaftandsecurewithsetscrew(29).
Attachtheadapterange(30)tothemotor(12)
with4socketheadcapscrews(31).
10.ForULmotors:Placecoupling(9)ushtothe
bottomofthemotorshaft.SeeFigure4,leftside.
Securelytightensetscrewincoupling.
ForATEXmotors:Placecoupling(9)ushtothe
bottomoftheadapter(28).SeeFigure4,right
side.
MOTORTHERMOSTATLEADS
ForATEXmotors,followthethermalprotectionwiring
requirementsdescribedintheATEXmotormanual.
TheATEXmotormanualisincludedwiththeagitator.
ForNon-GracosuppliedVFD—seethemotor
Installationmanualforinstructionstoconnecttothe
VFD.
Figure4CouplingonMotorShaft
11.Placemotoronmotorange(10)andsecure
with4capscrews(13).Rotatemotortodesired
locationbasedontheelectricalconnection.If
motoristoberemovedoften,motorcanbe
securedtothemotorangewiththesupplied
wingscrews(labeledas13inpartslist).
VFD
VFD VFD
SeetheVFDmanufacturer’smanualforinformation
oninstallationandoperationoftheVFD.
ForaGracosuppliedVFD,seemanual3A4793for
informationonVFDinstallationandoperation.
Connect
Connect Connect
Toavoidequipmentdamage,donotplugthe
motordirectlyintoawallsocket.Themotormust
bewiredtoaVFD.
VFD
VFD VFD
to
Motor
to to
Motor Motor
NOTICE
NOTICE NOTICE
Grounding
Grounding Grounding
Theequipmentmustbegroundedtoreducethe
riskofstaticsparkingandelectricshock.Electric
orstaticsparkingcancausefumestoigniteor
explode.Impropergroundingcancauseelectric
shock.Groundingprovidesanescapewireforthe
electriccurrent.
Thedrumcoverandallelectricallyconductive
objectsordevicesinthedispensingareamustbe
properlygrounded.Checkyourlocalelectricalcode
fordetailedgroundinginstructionsforyourareaand
typeofequipment.
To
ground
To To
ground ground
groundwire(G)tothegroundconnectoronthe
agitator(33).Connecttheotherendoftheground
wiretoatrueearthground.
NOTE:Groundwireisnotsupplied.
separately,usepartnumber237569,WireAssembly,
25FT
.
the
Agitator
the the
Agitator Agitator
the
agitator,
the the
agitator, agitator,
connectoneendofthe
Toorder
Followtheinstructionsinthemotormanufacturer’s
manualprovidedwiththisagitatortoconnectthe
VFDtothemotor.Wiresize,fusesize,andother
electricaldevicesmustcomplywithalllocalcodes
andregulations.
Motorsareequippedwithanautomaticthermal
protectivedevice.Reviewthewarninglabelonthe
motorstatingtherequirementforconnectingtothe
controlcircuitterminalsoftheVFD.ULandNEC
requireconnectionofmotorthermostatleadsP1and
P2intothecontrolportionofamanualresetstart
circuit.
ForGracosuppliedVFDs,motorthermostatleadsP1
andP2connecttoterminals4and13BontheVFD,
asshownbelow.
83A4553F
Figure5AgitatorGroundWire
Page 9
Installation
Gear
Gear Gear
ThefollowingguresillustratehowtoinstallthegearreducerkitsontoULandATEXlistedmotorassemblies.
Reducer
Reducer Reducer
Mounting
Mounting Mounting
Kit
Installation
Kit Kit
Installation Installation
Figure6
Kit
25N644
Kit Kit
25N644 25N644
Bearing
Bearing Bearing
onto
UL
Motor
onto onto
UL UL
Housing
Housing Housing
Assembly
Assembly Assembly
and
Motor Motor
and and
Mounting
Mounting Mounting
Kit
Kit Kit
Bearing
Bearing Bearing
Figure7
25N645
25N645 25N645
Housing
Housing Housing
onto
ATEX
Motor
onto onto
ATEX ATEX
Assembly
Assembly Assembly
and
Motor Motor
and and
Ref
Ref Ref
No.
No. No.
8
9
9a
10
12
13
Part
No.
Part Part
—
—
—
—
—
—
—
—
Description
No. No.
Description Description
DISK,SPIDER,
HYTRELALIGNMENT
COUPLING,
ALIGNMENT,0.62”
BOREDIAMETER
SCREW,SET
FLANGE,MOUNT,
MOTOR
MOTOR,ULListed;3/4,
230/460,TEFC,XP,60
HZ(model25C454)
MOTOR,ATEX;0.37
kW,230/400,TEFC,
XP,50HZ(model
25C463)
SCREW,CAP,
SOCKETHEAD;
3/8–16x1”
SCREW,WING;
3/8–16x1.5”(Not
Shown)
Qty
Qty Qty
1
1
1
1
1
1
4
4
Ref
Ref Ref
No.
No. No.
34
34a
34b
34c
34d
34e
34f
34g
Part
No.
Part Part
25N644
25N645
—
—
—
—
—
—
—
Description
No. No.
Description Description
FLANGE,MOUNT,
OUTPUT
SCREW,SOCKET
HEADCAP
FLANGE,SPACER
SCREW,SOCKET
HEADCAP
FLANGE,ADAPTER
COLLAR
SCREW,SET
SCREW,CAP
Qty
Qty Qty
1
4
1
4
1
1
1
4
3A4553F9
Page 10
Operation
0
50
100
150
200
250
300
350
400
450
500
550
600
650
6 8 10 12 14 16 18 205432 7 9 11 13 15 17 19
Operation
Operation Operation
Toreducetheriskofseriousinjury,includingcuts,
amputationofngersbytheagitatorblades,and
splashingintheeyesorontheskin,alwayspower
offanddisconnectpowertotheVFDbeforeraising,
checking,orrepairingtheagitator.
Equipmentsurfacesanduidthatisheatedcan
becomeveryhotduringoperation,resultingin
severeburns.Toavoidsevereburnsdonottouch
hotuidorequipment.
General
General General
UsetheVFDtostart,stop,andadjusttheagitator
speed.SeetheVFDmanufacturer’smanualfor
operatinginformation.ForaGracosuppliedVFD,
seemanual3A4793foroperatinginformation.
Operation
Operation Operation
Finding
Finding Finding
1.Filltheuidsupplycontainertoabout3or4
inches(75to100mm)abovetheagitatorblade.
2.Starttheagitatorandgraduallyincreasethe
speeduntilavortexbeginstoformintheuid.
3.Reducethespeedslightly,thenlltheuid
container.
NOTE:Speedislimitedtoapproximately300rpmfor
the12”(30cm)impeller.
IfusingaGracosuppliedVFD,theagitatorspeed
canbecalculatedbyusingtheformulabelow,or
determinedbythegraphbelowusingtheVFD
frequency.
Example1:(AIB)xC=D
Example2:(10hzI60hz)x1725rpm=292rpm
AVFDFrequency
BMotorFrequency
CMotorSpeed
DAgitatorRPM
the
Proper
the the
Proper Proper
Agitator
Agitator Agitator
Speed
Speed Speed
Agitatorsareusedtomaintainsolidsinsuspension.
Ifsolidshavesettledinthecontainer,useashaker
orsomeotherdevicetobringproductbackin
suspensionbeforeinstallingandoperatingthe
agitator.
Activatetheagitatortomixuidthoroughlybefore
supplyinguidtothedispensingequipment.Continue
mixinguidwhilethedispensingequipmentisbeing
supplied.
NOTE:Alwaysusemoderateagitationspeeds.
Excessiveagitatorspeedmaycausevibration,
foamingofuid,andincreasedwearonparts.
AgitatorShaftSpeed
(rpm)
VFDFrequency(Hz)
—ULMotorAgitatorShaftSpeed–––ATEXMotorAgitatorShaftspeed
103A4553F
Note
Divideagitatorspeedby5whenagitator
installationcontainstheoptionalgear
reducer.
Page 11
Maintenance
Bearings
Maintenance
Maintenance Maintenance
Bearings Bearings
Bearingsaresealedanddonotrequirelubrication.
Inspectyearlytoverifybearingsarerunningsmoothly
andnotdamaged.Replaceifnecessarywithanew
bearinghousing.
Movingparts,suchasanimpellerblade,canpinch
oramputatengers.Toreduceriskofinjury,
alwayspoweroffanddisconnectpowerfromthe
VFDbeforeraising,checking,orrepairingthe
agitator.
Routine
Routine Routine
Checkandretightenallcapscrewseverysixmonths
orduringdowntimesiftheyoccurmorefrequently.
Check
Check Check
Withinthersttwoweeksofoperation,checkallcap
screwsandsetscrewstomakesurethescrewsare
tightened.Retightenasrequired.
Periodic
Periodic Periodic
Screw
Screw Screw
Maintenance
Maintenance Maintenance
and
Bolt
and and
Tightness
Bolt Bolt
Tightness Tightness
Gear
Gear Gear
Thegearreducerislledwithsyntheticoilandshould
bereplacedafterevery20,000operatinghoursor
aftereveryfouryears.Consultthegearreducer
manualshippedwiththegearreducerforinstructions
onreplacingthelubricationoil.
Reducer
Reducer Reducer
3A4553F
11
Page 12
Service
Service
Service Service
•Movingparts,suchasanimpellerblade,can
pinchoramputatengers.Toreduceriskof
injury,alwaysdisconnectpowerfromtheagitator
beforeperformingmaintenanceorservice.
•Improperhandlingofhazardousuidsorinhaling
toxicfumescancauseseriousinjurydueto
splashingintheeyes,ingestion,orbodily
contamination.
Shaft
Shaft Shaft
Theshaftseal(2)andspacer(3)arelocatedatthe
bottomoftheagitatorange(1).Theshaftseal
shouldbeinspectedperiodically,perusage,forwear
ordamage,andreplacedifnecessary.
Toinspectandreplacetheshaftsealfollowthesteps
below.
Seal
Seal Seal
Removal
Removal Removal
and
Replacement
and and
Replacement Replacement
9.Completetheprocedurebyfollowingthestepsin
Motor,BearingHousing,andImpellerInstallation,
page7.
Figure8ShaftSealReplacementfor
Flange/Quick-clampMount
1.DisconnecttheVFDpowersupply.
2.Removethemotorandtheagitatorshaftby
reversingthestepsinMotor,BearingHousing,
andImpellerInstallation,page7.
3.Removethecapscrews(5)holdingthebearing
housing(4)inplace.
4.Removethebearinghousing.
5.Removethespacer(3)andshaftseal(2).
6.Inspectthesealfordamage.Replaceif
necessary.
7.Toreinstall,placethenewsealspring-sidedown
intheange(1)withspacerontopofit.
8.Placethebearinghousingontheangeand
securewiththecapscrews.Tightensecurely.
Figure9ShaftSealReplacementforPressure
Tank
12
3A4553F
Page 13
Parts
Parts
Parts Parts
Models
Models Models
Flange
Flange Flange
25C454
25C454 25C454
Mount
Mount Mount
and
25C463
and and
25C463 25C463
3A4553F13
Page 14
Parts
Ref
Ref Ref
No.
No. No.
Part
No.
Part Part
No. No.
AN/A
1*
2*
3*
17N898
17N588
15Y360
4*25C455HOUSING,BEARING
5*
112222
617N949
7
7a
122761
N/A
8122760
916P923
9aN/A
1017N899
25C967
12
25C968
Description
Description Description
ASSEMBLY,
HOUSING/FLANGE,
BEARING
FLANGE,MOUNTING,
3"LID;150#
SEAL,PTFE
SPACER,SEAL,ASME
SHAFT
SCREW,CAP,
SOCKETHEAD;
1/4–20x1”
RING,RETAINING,
HEAVYDUTY
COUPLING,
ALIGNMENT,0.75”
BOREDIAMETER
SCREW,SET
DISK,SPIDER,
HYTRELALIGNMENT
COUPLING,
ALIGNMENT,0.62”
BOREDIAMETER
SCREW,SET
FLANGE,MOUNT,
MOTOR
MOTOR,ULListed;3/4,
230/460,TEFC,XP,60
HZ(model25C454)
MOTOR,ATEX;0.37
kW,230/400,TEFC,
XP,50HZ(model
25C463)
Ref
Qty
Qty Qty
Ref Ref
No.
No. No.
Part
No.
Part Part
Description
No. No.
Description Description
Qty
Qty Qty
SCREW,CAP,
1
C19837
SOCKETHEAD;
4
3/8–16x1”
13
1
17P459
1
1
1
2017N963
+
See
Table3
8
23aN/A
1
1
+
24
2617R748
See
Table4
2817P777
1
29108161
SCREW,WING;
3/8–16x1.5“(Not
Shown)
GASKET,AGITATOR
7.5”Diameter
IMPELLER,4”;KIT1
IMPELLER,8”;KIT1 23
IMPELLER,12”;KIT1
SCREW,SET
SHAFT,AGITATOR
BOLT,EYE;
3/8–16x1.5”
ADAPTER,MOTOR,
ATEX
SCREW,SET,
SOCKETHEAD;
4
1
1
1
2
1
1
M4x0.7x8mm
1
3017P776
1
1
31107530
FLANGE,MOTOR,
ATEX
SCREW,CAP,
SOCKETHEAD;
M6x1x12mm
1
4
SCREW,GROUND,
1
33116343
WASHERHEAD;
1
M5x8mm
▲
44
1
*Partoffactory-assembleditemA.
+
Notincludedwith25C454or25C463.Mustbe
17R088
LABEL,WARNING
1
orderedseparately.
▲
ReplacementDangerandWarninglabels,signs,
tags,andcardsareavailableatnocost.
14
3A4553F
Page 15
Parts
Models
Models Models
Quick-Clamp
Quick-Clamp Quick-Clamp
25C453,
25C453, 25C453,
Mount
Mount Mount
25C575,
25C575, 25C575,
25C464,
25C464, 25C464,
25C576
25C576 25C576
3A4553F15
Page 16
Parts
Ref
Ref Ref
No.
No. No.
Part
No.
Part Part
No. No.
AN/A
17N901
1*
17P566
2*
3*
17N588
15Y360
4*25C455HOUSING,BEARING
5*
112222
617N949
7
7a
122761
N/A
8122760
916P923
9aN/A
1017N899
25C967
12
25C968
Description
Description Description
ASSEMBLY,
HOUSING/FLANGE,
BEARING
FLANGE,AGITATOR,
3"QUICK-CLAMP
(models25C453,
25C464)
FLANGE,AGITATOR,
4"QUICK-CLAMP
(models25C575,
25C576)
SEAL,PTFE
SPACER,SEAL,ASME
SHAFT
SCREW,CAP,
SOCKETHEAD;
1/4–20x1”
RING,RETAINING,
HEAVYDUTY
COUPLING,
ALIGNMENT,0.75”
BOREDIAMETER
SCREW,SET
DISK,SPIDER,
HYTRELALIGNMENT
COUPLING,
ALIGNMENT,0.62”
BOREDIAMETER
SCREW,SET
FLANGE,MOUNT,
MOTOR
MOTOR,ULLISTED;
3/4,230/460,TEFC,
XP,60HZ(model
25C453and25C575)
MOTOR,ATEX;0.37
kW,230/400V,TEFC,
XP50HZ(model
25C464and25C576)
Ref
Qty
Qty Qty
Ref Ref
No.
No. No.
Part
No.
Part Part
Description
No. No.
Description Description
Qty
Qty Qty
SCREW,CAP,
1
C19837
SOCKETHEAD;
4
3/8–16x1”
13
SCREW,WING;
1
17P459
3/8–16x1.5”(Not
Shown)
4
IMPELLER,4”;KIT1
+
1
See
Table3
IMPELLER,8”;KIT1 23
IMPELLER,12”;KIT1
1
1
1
8
23aN/A
+
24
2617R748
2817P777
See
Table4
SCREW,SET
SHAFT,AGITATOR
BOLT,EYE;
3/8–16x1.5”
ADAPTER,MOTOR,
ATEX
2
1
2
1
SCREW,SET,
1
29108161
SOCKETHEAD;
1
M4x0.7x8mm
1
1
3017P776
31107530
FLANGE,MOTOR,
ATEX
SCREW,CAP,
SOCKETHEAD,
1
4
M6x1x12mm
1
SCREW,GROUND,
33116343
1
▲
44
1
1
*Partoffactory-assembleditemA.
+
Notincludedwith25C453,25C575,25C464,or
17R088
WASHERHEAD;
M5x8mm
LABEL,WARNING
1
1
25C576.Mustbeorderedseparately.
▲
ReplacementDangerandWarninglabels,signs,
1
tags,andcardsareavailableatnocost.
1
163A4553F
Page 17
Parts
Models
Models Models
Pressure
Pressure Pressure
25C462,
25C462, 25C462,
Tank
Mount
Tank Tank
Mount Mount
25C470,
25C470, 25C470,
25C471,
25C471, 25C471,
25C465,
25C465, 25C465,
25C472,
25C472, 25C472,
25C473
25C473 25C473
3A4553F
17
Page 18
Parts
Ref
Ref Ref
No.
No. No.
Part
No.
Part Part
No. No.
AN/A
1*
2*
3*
17N900
17N588
15Y360
4*25C455HOUSING,BEARING
5*
112222
617N949
7
7a
122761
N/A
8122760
916P923
9aN/A
1017N899
25C967
12
25C968
Description
Description Description
ASSEMBLY,
HOUSING/FLANGE,
BEARING
FLANGE,AGITATOR,
PRESSURETANK
SEAL,PTFE
SPACER,SEAL,ASME
SHAFT
SCREW,CAP,
SOCKETHEAD;
1/4–20x1”
RING,RETAINING,
HEAVYDUTY
COUPLING,
ALIGNMENT,0.75”
BOREDIAMETER
SCREW,SET
DISK,SPIDER,
HYTRELALIGNMENT
COUPLING,
ALIGNMENT,0.62”
BOREDIAMETER
SCREW,SET
FLANGE,MOUNT,
MOTOR
MOTOR,ULListed;3/4,
230/460,TEFC,XP,60
HZ(models25C462,
25C470,25C471)
MOTOR,ATEX;3/4,
230/460,TEFC,XP,60
HZ(models25C465,
25C472,25C473)
Ref
Qty
Qty Qty
Ref Ref
No.
No. No.
Part
No.
Part Part
Description
No. No.
Description Description
Qty
Qty Qty
SCREW,CAP,
1
C19837
SOCKETHEAD;
4
3/8–16x1”
13
1
17P459
1
21196309
1
22188784NUT1
1
8
+
23
17N704
SCREW,WING;
3/8–16x1.5”(Not
Shown)
GASKET
IMPELLER,4”;KIT
(models25C462,
25C470,25C465,
25C472)
4
1
1
IMPELLER,4”;KIT
1
(models25C471,
2
25C473)
1
23aN/A
17P015
1
1
17P020
17P023
1
2617R748
1
1
2817P777
SCREW,SET
SHAFT,34”(25C471,
25C473)
SHAFT,24”(25C470,
25C472)
SHAFT,18”(25C462,
25C465)
BOLT,EYE;
3/8–16x1.5”
ADAPTER,MOTOR,
ATEX
1
1
1 24
1
2
1
SCREW,SET,
29108161
1
3017P776
1
31107530
SOCKETHEAD;
M4x0.7x8mm
FLANGE,MOTOR,
ATEX
SCREW,CAP,
SOCKETHEAD;
1
1
4
M6x12mm
3217N542
WASHER,LOCK
1
SCREW,GROUND,
33116343
WASHERHEAD;
M5x8mm
▲
44
17R088
LABEL,WARNING
*Partoffactory-assembleditemA.
▲
ReplacementDangerandWarninglabels,signs,
tags,andcardsareavailableatnocost.
183A4553F
1
1
Page 19
Dimensions
Dimensions
Dimensions Dimensions
Reference
Reference Reference
optionalgear
optionalgear
Flange
Flange Flange
ULATEXULATEXULATEX
25C45425C463
A
A
(with
reducer)
B
B
(with
reducer)
C
11.62(29.5)8.84(22.5)11.62(29.5)8.84(22.5)11.62(29.5)8.84(22.5)
24.52(62.3)20.14(51.2)24.52(62.3)20.14(51.2)24.52(62.3)20.14(51.2)
20.44(51.9)17.75(45.1)20.84(52.9)17.75(45.1)20.48(52.0)17.75(45.1)
28.04(71.2)24.65(62.6)28.43(72.2)24.65(62.6)28.08(71.3)24.65(62.6)
Mount
Mount Mount
in.
in. in.
----
----
----
Models
Models Models
(cm)
(cm) (cm)
Quick
Clamp
Quick Quick
Clamp Clamp
in.
in. in.
25C453,
25C575
Models
Models Models
(cm)
(cm) (cm)
25C464,
25C576
Pressure
Pressure Pressure
25C462,
25C470,
25C471
5Gallon12.80(32.5)
10Gallon18.80(47.8)
15Gallon32.80(83.3)
Tank
Mount
Tank Tank
Mount Mount
in.
(cm)
in. in.
(cm) (cm)
Models
Models Models
25C465,
25C472,
25C473
3A4553F19
Page 20
PowerUsageCharts
0
10
20
30
40
50
60
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
0
20
40
60
80
100
120
140
160
180
200
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
Power
Power Power
Usage
Usage Usage
Charts
Charts Charts
Inthefollowingcharts,thepowermeasuredincludestheVFDpowerusage.Thatpowerwasmeasuredwith480VAC
3phlinevoltagewithnogearreductions.
UL
Motor
with
in.
(10
cm)
UL UL
Motor Motor
with with
4 44in. in.
(10 (10
Power
(W)
Power Power
(W) (W)
Agitator
Agitator Agitator
Diameter
cm) cm)
Diameter Diameter
RPM
RPM RPM
Impeller
Impeller Impeller
Material
Material Material
Viscosity
Viscosity Viscosity
UL
Motor
with
in.
(20
cm)
UL UL
Motor Motor
with with
8 88in. in.
(20 (20
Power
(W)
Power Power
(W) (W)
Agitator
Agitator Agitator
UL
Motor
with
12
in.
UL UL
Motor Motor
with with
12 12
(30
in. in.
(30 (30
Diameter
cm) cm)
Diameter Diameter
RPM
RPM RPM
cm)
Diameter
cm) cm)
Diameter Diameter
Impeller
Impeller Impeller
Material
Material Material
Impeller
Impeller Impeller
Material
Material Material
Viscosity
Viscosity Viscosity
Viscosity
Viscosity Viscosity
Power
(W)
Power Power
(W) (W)
203A4553F
Agitator
Agitator Agitator
RPM
RPM RPM
Page 21
PowerUsageCharts
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400 450 500
300 cp
100 cp
0 cp
ATEX
Motor
with
in.
(10
cm)
ATEX ATEX
Motor Motor
with with
4 44in. in.
(10 (10
Diameter
cm) cm)
Diameter Diameter
Impeller
Impeller Impeller
Material
Material Material
Power
(W)
Power Power
(W) (W)
Agitator
Agitator Agitator
ATEX
Motor
ATEX ATEX
Motor Motor
Power
(W)
Power Power
(W) (W)
with
with with
8 88in. in.
RPM
RPM RPM
in.
(20
cm)
(20 (20
Diameter
cm) cm)
Diameter Diameter
Impeller
Impeller Impeller
Material
Material Material
Viscosity
Viscosity Viscosity
Viscosity
Viscosity Viscosity
ATEX
Motor
ATEX ATEX
Motor Motor
Power
(W)
Power Power
(W) (W)
3A4553F
Agitator
Agitator Agitator
with
12
with with
12 12
Agitator
Agitator Agitator
RPM
RPM RPM
in.
(30
cm)
in. in.
(30 (30
Diameter
cm) cm)
Diameter Diameter
RPM
RPM RPM
Impeller
Impeller Impeller
Material
Material Material
Viscosity
Viscosity Viscosity
21
Page 22
TechnicalSpecications
Technical
Technical Technical
Electric
Electric Electric
MotorPower
MotorHazardousLocationApprovals
MotorElectricalRequirements
MaximumRecommendedAgitatorShaftSpeed500rpm*
MinimumRecommendedMotorSpeed**2hz,58rpm(UL),2hz,56rpm(ATEX/IECEx)
Weight(Motor,BearingHousing,Shaft,Blade)55–65lb.(25–30kg)
WettedParts
MaximumAllowableProcessFluidTemperature
RecommendedMaximumMaterialViscosity300cP
NoiseData(SoundPressureLevel)
Direct
Direct Direct
Specications
Specications Specications
Drive
Agitators
Drive Drive
Agitators Agitators
UL:3/4hp;
ATEX:0.37kW
UL:ExplosionProofClass1GroupC&D
Class2GroupF>3C
ATEX/IECEx:ExII2GExdIIBT4Gb(see
declarationsincludedwithmotors)
UL:230/460VAC,60Hz,3Phase
ATEX/IECEx:230/400VAC,50Hz,3Phase
300seriesSST
194°F(90°C)
Lessthan75dBA
AmbientandOperatingTemperatureRange(limited
bymotor)
*SeeFindingtheProperAgitatorSpeed,page10forinstructionsoncalculatingagitatorspeed.
**Theminimumrecommendedspeedisbasedonanoperatingenvironmenttemperatureof72°F(22°C).Higher
environmentaltemperaturesmayrequirehigherspeedsforadequatemotorcooling.
32°Fto104°F(0°Cto40°C)
22
3A4553F
Page 23
Graco
Graco Graco
GracowarrantsallequipmentreferencedinthisdocumentwhichismanufacturedbyGracoand
bearingitsnametobefreefromdefectsinmaterialandworkmanshiponthedateofsaletotheoriginal
purchaserforuse.Withtheexceptionofanyspecial,extended,orlimitedwarrantypublishedby
Graco,Gracowill,foraperiodoftwelvemonthsfromthedateofsale,repairorreplaceanypartofthe
equipmentdeterminedbyGracotobedefective.Thiswarrantyappliesonlywhentheequipmentis
installed,operatedandmaintainedinaccordancewithGraco’swrittenrecommendations.
Thiswarrantydoesnotcover,andGracoshallnotbeliableforgeneralwearandtear,orany
malfunction,damageorwearcausedbyfaultyinstallation,misapplication,abrasion,corrosion,
inadequateorimpropermaintenance,negligence,accident,tampering,orsubstitutionofnon-Graco
componentparts.NorshallGracobeliableformalfunction,damageorwearcausedbythe
incompatibilityofGracoequipmentwithstructures,accessories,equipmentormaterialsnotsupplied
byGraco,ortheimproperdesign,manufacture,installation,operationormaintenanceofstructures,
accessories,equipmentormaterialsnotsuppliedbyGraco.
Thiswarrantyisconditionedupontheprepaidreturnoftheequipmentclaimedtobedefectivetoan
authorizedGracodistributorforvericationoftheclaimeddefect.Iftheclaimeddefectisveried,
Gracowillrepairorreplacefreeofchargeanydefectiveparts.Theequipmentwillbereturnedto
theoriginalpurchasertransportationprepaid.Ifinspectionoftheequipmentdoesnotdiscloseany
defectinmaterialorworkmanship,repairswillbemadeatareasonablecharge,whichchargesmay
includethecostsofparts,labor,andtransportation.
THIS
WARRANTY
THIS THIS
WARRANTY WARRANTY
OR
IMPLIED,
OR OR
IMPLIED, IMPLIED,
WARRANTY
WARRANTY WARRANTY
Graco’ssoleobligationandbuyer’ssoleremedyforanybreachofwarrantyshallbeassetforthabove.
Thebuyeragreesthatnootherremedy(including,butnotlimitedto,incidentalorconsequential
damagesforlostprots,lostsales,injurytopersonorproperty,oranyotherincidentalorconsequential
loss)shallbeavailable.Anyactionforbreachofwarrantymustbebroughtwithintwo(2)yearsof
thedateofsale.
GRACO
GRACO GRACO
MERCHANTABILITY
MERCHANTABILITY MERCHANTABILITY
ACCESSORIES,
ACCESSORIES, ACCESSORIES,
BY
BY BY
hose,etc.),aresubjecttothewarranty,ifany,oftheirmanufacturer.Gracowillprovidepurchaserwith
reasonableassistanceinmakinganyclaimforbreachofthesewarranties.
InnoeventwillGracobeliableforindirect,incidental,specialorconsequentialdamagesresulting
fromGracosupplyingequipmenthereunder,orthefurnishing,performance,oruseofanyproductsor
othergoodssoldhereto,whetherduetoabreachofcontract,breachofwarranty,thenegligenceof
Graco,orotherwise.
FORGRACOCANADACUSTOMERS
ThePartiesacknowledgethattheyhaverequiredthatthepresentdocument,aswellasalldocuments,
noticesandlegalproceedingsenteredinto,givenorinstitutedpursuantheretoorrelatingdirectlyor
indirectlyhereto,bedrawnupinEnglish.Lespartiesreconnaissentavoirconvenuquelarédaction
duprésentedocumentseraenAnglais,ainsiquetousdocuments,avisetprocéduresjudiciaires
exécutés,donnésouintentés,àlasuitedeouenrapport,directementouindirectement,avecles
procéduresconcernées.
MAKES
MAKES MAKES
GRACO.
GRACO. GRACO.
IS
EXCLUSIVE,
IS IS
INCLUDING
INCLUDING INCLUDING
OF
OF OF
Theseitemssold,butnotmanufacturedbyGraco(suchaselectricmotors,switches,
EXCLUSIVE, EXCLUSIVE,
BUT
FITNESS
FITNESS FITNESS
NO
NO NO
EQUIPMENT,
EQUIPMENT, EQUIPMENT,
BUT BUT
FOR
FOR FOR
WARRANTY,
WARRANTY, WARRANTY,
AND
FITNESS
AND AND
FITNESS FITNESS
MATERIALS
MATERIALS MATERIALS
Standard
Standard Standard
AND
IS
IN
AND AND
NOT
LIMITED
NOT NOT
LIMITED LIMITED
PARTICULAR
A AAPARTICULAR PARTICULAR
AND
AND AND
FOR
FOR FOR
LIEU
IS IS
IN IN
LIEU LIEU
TO
WARRANTY
TO TO
WARRANTY WARRANTY
PURPOSE.
PURPOSE. PURPOSE.
DISCLAIMS
DISCLAIMS DISCLAIMS
PARTICULAR
A AAPARTICULAR PARTICULAR
OR
COMPONENTS
OR OR
COMPONENTS COMPONENTS
Warranty
Warranty Warranty
OF
ANY
OF OF
ALL
ALL ALL
OTHER
ANY ANY
OTHER OTHER
IMPLIED
IMPLIED IMPLIED
PURPOSE,
PURPOSE, PURPOSE,
WARRANTIES,
WARRANTIES, WARRANTIES,
OF
MERCHANTABILITY
OF OF
MERCHANTABILITY MERCHANTABILITY
WARRANTIES
WARRANTIES WARRANTIES
IN
CONNECTION
IN IN
SOLD
SOLD SOLD
CONNECTION CONNECTION
BUT
NOT
BUT BUT
NOT NOT
EXPRESS
EXPRESS EXPRESS
OR
OR OR
OF
OF OF
WITH
MANUFACTURED
MANUFACTURED MANUFACTURED
WITH WITH
Graco
Graco Graco
ForthelatestinformationaboutGracoproducts,visitwww.graco.com.
Forpatentinformation,seewww.graco.com/patents.
To
To To
Phone:
Phone: Phone:
Allwrittenandvisualdatacontainedinthisdocumentreectsthelatestproductinformationavailableatthetimeofpublication.
Information
Information Information
place
an
place place
an an
612-623-6921or ororToll Toll
GRACO
GRACO GRACO
order,
order, order,
contactyourGracoDistributororcalltoidentifythenearestdistributor.
Toll
Free:
Free: Free:
1-800-328-0211Fax: Fax:
Gracoreservestherighttomakechangesatanytimewithoutnotice.
OriginalInstructions.ThismanualcontainsEnglish.MM3A4553
Graco
International
International International
INC.
AND
INC. INC.
Copyright
Copyright Copyright
SUBSIDIARIES
AND AND
SUBSIDIARIES SUBSIDIARIES
2019,
Graco
2019, 2019,
Graco Graco
Graco Graco
Inc.
Inc. Inc.
Ofces:
Ofces: Ofces:
• ••P.O. P.O.
All
Graco
All All
Graco Graco
Headquarters:
Headquarters: Headquarters:
P.O.
manufacturing
manufacturing manufacturing
www.graco.com
RevisionF,August2019
Fax:
612-378-3505
Belgium,China,Japan,Korea
BOX
BOX BOX
Minneapolis
1441
MINNEAPOLIS
1441 1441
• ••MINNEAPOLIS MINNEAPOLIS
locations
locations locations
MN
55440-1441
MN MN
are
registered
are are
registered registered
55440-1441 55440-1441
USA
• ••USA USA
ISO
9001.
to totoISO ISO
9001. 9001.
Loading...