Page 1
Instructions-Parts
Metric Air Fitting
334358A
Adapter Kit
For replacing air fittings with metric air fittings on InvisiPac® systems. For professional
use only.
Metric Fitting Adapter Kit, 24W637
For InvisiPac Systems
Important Safety Instructions
Read all warnings and instructions in this
manual and in the InvisiPac system manual.
Save these instructions.
EN
Page 2
Installation
Installation
1. Shutdown the system. See InvisiPac system manual for instructions.
2. Remove the air fitting in the air solenoid valve on the
feed container (S). Replace with fitting (3) for 10 mm
tube.
S
3
ti20928a
FIG. 1
3. Remove the air fitting on the air manifold for the
applicator manifold. Replace with fitting (2) for 10
mm tube.
2
4. Use fitting (1 or 4) on the end of the air filter for the
incoming air to the InvisiPac system.
1 or 4
ti21147a
FIG. 3
Parts
Air Metric Fitting Kit 24W637
Qty
Ref. Part Description
1 127922 FITTING, 3/8 npt(m) x M18(f) 1
2 127923 FITTING, 1/4 npt(m) x 10 mm
tube
3 127924 FITTING, 1/4 npt(m) x 10 mm
90° elbow tube
4 127925 FITTING, 3/8-18 npt(m) x 3/8-19
bspt (f)
.
1
1
1
ti21132a
FIG. 2
Graco Information
For the latest information about InvisiPac, visit www.InvisiPac.com.
For technical assistance or customer service, call toll free: 1-800-458-2133.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
2 334358A
Graco reserves the right to make changes at any time without notice.
Original instructions.
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
This manual contains English. MM 334358
www.graco.com
Revision A, August, 2014
Loading...