Graco 24N815 User Manual
Mobile Lubrication Library
Excavators
Suggested automated lubrication system layout for 13-36 ton excavators.
Kit No.: 24N815, Excavator, G3, USP, 19PT
333501B
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all
related manuals. Save all instructions.
Related Manuals
Manual No. Manual Title
3A0414 G3 Pump
3A0525 Pressure Relief Valve
3A0528 Remote Manual Run
3A0860 USP Valves
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to
replace the installation and maintenance instructions provided by the original equipment manufacturer.
Fluid leaks from incorrectly installed or ruptured components, and/or failure to verify the components are properly
installed and tested, can result in serious injury such as
fluid spraying in the eyes or on skin and fluid injection, or
equipment damage.
To prevent injury or equipment damage, installation must
be done by a professional and tested prior to use. Consult
Parker literature for specific hose assembly instructions.
These instructions are available from your Parker representative or at www.Parker.com/pdf.
Mobile Lubrication Library
9
10
11
12
1
2
3
4
5
6
7
8
12-PORT
Left Side
Right Side
9
10
1
2
3
4
5
6
7
8
10-PORT
Left Side
Right Side
19
19
15
15
18
18
17
17
16
16
11
11
14
14
13
13
12
12
9
9
5
5
8
8
7
7
6
6
1
1
4
4
3
3
2
2
10
10
= LUBE POINT
SUPPLY
PUMP
Top View Excavator
Suggested Lube Points
USP Valve System
POWER
LUBE POINT INFORMATION
Lube
Point
1 Serving Swing Circle 0.2 CC
2 Serving Swing Circle 0.2 CC
3 Boom Foot 0.2 CC
Lube Point Location
4 Boom Foot 0.2 CC
5 Boom Foot 0.2 CC
6 Boom Cylinder (Head End) 0.2 CC
7 Boom Cylinder (Head End) 0.2 CC
8 Boom Cylinder Foot 0.2 CC
9 Boom Cylinder Foot 0.2 CC
10 Arm Cylinder (Head End) 0.2 CC
11 Arm Cylinder Foot 0.2 CC
12 Arm Link 0.4 CC
USP
Volume
Dispense
LUBE POINT INFORMATION
13 Bucket Cylinder (Head End) 0.2 CC
14 Arm Bucket Pin 0.4 CC
15 Bushing 0.2 CC
16 H-link 0.2 CC
17 H-link 0.2 CC
18 Bucket Cylinder Foot 0.2 CC
19 Bucket Pin 0.4 CC
TOTAL 4.4 CC
Loading...