Graco 24N319, 3A2499B User Manual

Instructions - Parts

24N319 Round S

To convert a P
Electrostat

Important Safety Instructions
Read all warnings and instructions in this manual and in your Pro Xp
Electrostatic Air-Assisted Spray Gun manual. Save these instructions.

3000 psi (
Fluid Wor

100 psi (
Air Work

See pag
not inc

luded.

ro Xp™

ic Air-Assisted Spray Gun to a round spray pattern. For professional use only.

21 MPa, 210 bar) Maximum
king Pressure

0.7 MPa, 7.0 bar) Maximum
ing Pressure

e 4 for part numbers. Gun is

pray Kit

3A2499B

EN

PROVEN QUALITY. LEADING TECHNOLOGY.

Installation

To reduce the risk of injury, follow the Pressure
Relief Procedure in your Pro Xp manual before
installing this kit.

1. Relieve the pressure.

2. Remove the retaining ring, air cap/tip guard, and
spray tip.

NOTICE

Do not operate the gun with a damaged
electrode (4a). Make sure the electrode is in
place before installing the air cap/electrode
assembly (4).

NOTE: The kit
a larger patt
smaller pat

4. Check that t
cap. The two
inserted i
cap, and sh
air cap. In
cap/elect
(2 or 3) ont

includes a large retainer (2) for

ern, and a small retainer (3) for a

tern.

he electrode (4a) is in place in the air

ends of the electrode should be

n the two holes on the back of the air

ould protrude through the front of the

stall the diffuser/seal assembly (1), air

rode assembly (4), and desired retainer

o the gun. Tighten the retainer firmly.

3. Flush the gun as instructed in your gun manual.
Relieve the pressure.

2

3A2499B