Page 1
READY
TO
ASSEMBLE
SLAT KIT QUEEN OR KING
ASSEMBLY INSTRUCTION
( QUEEN, KING )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips screwdriver and an Allen wrench.
PARTS LIST
01
02
03
04
SLAT SECTION
SUPPORT RAIL
TALL SUPPORT LEG
SHORT SUPPORT LEG
2 SET
2 PCS
4 PCS
4 PCS
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE
ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS
ARE DAMAGED DURING ASSEMBLY.
HARDWARE
1 1/2” Allen screw - 8 pcs
A
Spare - 1 pc
1 1/4” Wood screw - 8 pcs
BC
Spare - 2 pcs
Step 1
Assemble bed frame according to assembly instructions.
If using mattress and foundation set the bed up low and use short support leg (04).
If using storage drawers choose the tall support leg (03).
Customer supplied
Phillips
screw driver
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
PO :
Step 2
Assemble support legs (03 or 04) and support rail (02).
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other support rail.
C
03 / 04
Allen wrench
A
03 / 04
C
A
Adult assembly
02
A
2 1/2” Allen screw
Page 1 of 2
Page 2
READY
TO
ASSEMBLE
SLAT KIT QUEEN OR KING
Step 3
Lay the slat section (01) onto the bed.
Attach support rail assembly (02) to slat section (01).
Using Allen screw (A), tighten with the Allen wrench (C).
Repeat for section 2.
A
1 1/2” Allen screw
SECTION 2
C
Allen wrench
01
A
A
A
02
SECTION 1
Adult assembly
Step 4
Be sure to align slat section evenly with both
ends of side rail.
Screw slat section (01) to side rail, using wood screw (B).
Tighten with Phillips screwdriver. (Customer supplied).
Be sure the space between slats is even.
Adult assembly
B
1 1/4” Wood screw
Phillips screwdriver
B
B
01
Customer supplied
Page 2 of 2
Loading...