ASSEMBLY INSTRUCTION
PARTS NAME QTY
Headboard
1
Left Support Leg with
3 Mounting Brackets
(With the sticker "Left"
on the bottom)
1
Right Support Leg with 3
Mounting Brackets ( With the
sticker "Right" on the
bottom)
1
H1 Bolt M8X25mm
4
H2 Spring Washer
4
H3 Flat Washer
4
H4 Allen Key
1
H5 Bolt M8X25mm
5
H6 Spring Washer
5
H7 Flat Washer
5
H8 Nut Cap
5
H9 Solid Wrench
1
Headboard
DRAWING
Step 1 . Take out Legs and hardware under the headboard
PARTS #
P1
P2
P3
Pack A
( Used
to
assemb
le the
headbo
ard )
Pack B
(assem
ble the
headbo
ard to
the bed
frame)
Put the Headboard onto a flat
surface.
Align the mounting position on
Headboard to the mounting
position on Left Support
Leg(P2).
Then, lock the top and the
middle mounting positions by
Flat washer (H3), Spring
washer(H2), bolt(H1), Then
tighten the bolts with allen
wrench (H4) .
Repeat the same steps to install
the Right Support Leg(P3).
At this point of assembly, DO
NOT overfasten the connections.
The final height of the
Headboard may be adjusted to
your own need.
Step 3 . Headboard is ready to be assembled to bed frame using Pack B Parts.
Step 2
H1
H3
H2
H4
P2
P3
Loading...