ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Outlet Box
House Grounding Wire
Hex Nut(D)
Washer(J)
Green Grounding
Screw (C)
Wire Nut(E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(F)
Top Loop(H)
Canopy(G)
Hex Nut (D)
Canopy (G)
Washer (J)
Installation Steps
Turn off the power at fuse or circuit box.
Wire Nut (E)
Top Loop (H)
Loop Lock (K)
Threaded Pipe (F)
Collar (I)
Chain (L)
1. Attach the threaded pipe to the mounting strap, then secure it
with a washer and hex nut.
Attach the mounting strap to the outlet box by using two
2.
mounting screws.
Attach threaded pipe to the coupling ,secure middle fixture
3.
on the nipple and locking the spare parts..
4.
Secure the loop onto the stem of the middle fixture, thread
fixture
wires through threaded end of loop first.
Middle Fixture
Upper Arm
Nipple
Collar(I)
Loop Lock(K)
Chain(L)
Loop Lock(K)
Loop
Main Fixture
Bulb type A Max.
60W(not included)
Glass Shade
Socket Ring
Socket
Glass Holder
Middle Arm
InnerArm
.
The loop lock tightening in stem.5
Connect the chain:
6.
- Determine length of chain needed to achieve desired fixture height. (To remove excess chain section, use pliers
to bend link open.)
- Weave the fixture wires and fixture grounding wire through the chain, collar and canopy.
7. Connect one end of the chain to the loop using a loop lock.
8. Connect the other end of the chain to top loop by using the other loop lock.
9. Thread the fixture wire and fixture grounding wire through the top loop, threaded pipe and mounting strap.
10. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
T
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
11. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
12. Attach the glass shades to the glass holders, then secure them with socket rings.
13. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap (A)
Wire Nut (E)
Collar (I)
Mounting Screw (B)
Threaded Pipe (F)
box.
Washer (J)
Green Grounding
Screw (C)
Canopy (G)
Loop Lock (K)
Hex Nut (D)
Mounting
Hardware
Top Loop (H)
Chain (L)
Glass Shade
(5PC)
B
A: Ø24-1/2"
B: 21"
A
Loading...