
Caution : You must read this before you proceed
LOVESEAT
CAUTION : This Loveseat is NOT a TOY.
Keep your child / children at bay during the process of assembly.
When lifting or moving the Loveseat and to prevent damage to the
Loveseat, two adults should perform these actions.
Page 1 of 8

Label Picture Description QTY
A Seat Panel 1
B1 Right Leg Panel (Labelled B1) 1
B2 Left Leg Panel (Labelled B2) 1
C Back Panel 1
D Front Panel 1
E Backrest Panel 1
F Bottom Panel 1
G Backrest Cushion 2
H Seat Cushion 1
Page 2 of 8

Label Picture Description QTY
Before Beginning Assembly:
1
2
3
4
Short Bolt (M6x20mm) 9
Sleeve Nut (M6x13mm) 13
Allen key 2
Screw (M4x30mm) 3
Not
5
6
Screwdriver
Long Bolt (M6x45mm) 5
Page 3 of 8

OVERVIEW
Backrest
Cushion (G)
Backrest
Panel (E)
Left Leg
Panel (B2)
Right Leg
Panel (B1)
(H)
Seat Panel
(A)
Front Panel (D)
FRONT FACING
This Loveseat has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Loveseat parts, the above picture is to
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Page 4 of 8

Step 2
B1
4
C
Wooden dowel
Insert the wooden dowel on Back Panel(C) into mounting position on Right Leg
Panel(B1).
Affix Back Panel(C) with Right Leg Panel(B1) using Screw(④), with Screwdriver
5
Only loosely tighten the Screws.
Step 3
B1
D
3
2
6
3
3
2
6
3
Attach Front Panel(D) to Right Leg Panel(B1) using Long Bolt() and Sleeve
Nut(②) with Allen Keys(③)
Only loosely tighten the Bolts.
Repeat the same process of Step 2 and 3 with the other Left Leg Panel(B2).
Page 5 of 8

Step 4
Panel(B2) using Short Bolt(①) and Sleeve Nut(②) with Allen Keys(③)
5.2: Position Seat Panel(A) onto the Loveseat. Seat Panel (A) should be
2
1
3
2
1
Then, attach Backrest Panel(E) to Right Leg Panel(B1) and Left Leg
Only loosely tighten the Bolts.
Step 5
Step 5.1
Step 5.2
3
A
5.1: Position Bottom Panel(F) into inside of the Loveseat. This can make the
Loveseat have storage function
inside of Front Panel (D)
Page 6 of 8

Step 6
Then get off the Loveseat, and in a sequential manner, proceed to tighten
G
Place the Loveseat on a LEVEL SURFACE
Inspect it and make sure all parts are adequately connected.
Gently, sit into to the Loveseat. This would help to align all parts at all
joints.
all Bolts and Screws.
Place Backrest Cushion(G) and Seat Cushion(H) onto the Loveseat.
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Page 7 of 8