PIECE QUANTITY
A
1XB1X
C
1X
H1 2X
H2 1X
H3 4X
Rubber pad
Tray
Allen bolt
M6X25mm
Allen key
DESCRIPTION
PICTURE
Leg1
Leg2
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
Product Dimensions:17-1/3"WX17-1/3"DX23-3/5"H
Step 1 Step 2
Assemble the the legs(A&B) ,using Allen bolt(H1) Attach the rubber pads(H3) to the bottom of legs(A&B)
Tighten with allen key(H2),don't tighten too tight
Step 3
Put tray ( C ) on the top
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
2
1
3
Loading...