Grace Technologies all products Safety and Productivity
FREQUENTLY ASKED QUESTIONS
Q: Do you have CAD drawings for GracePort® Housings?
A: Absolutely! We have 2D PDF, 2D DWG, and 3D STP les
available. Visit your conguration at www.graceport.com to
download or email: sales@gracetechnologies.com.
Q: What is the SCCR rating for the accessory power outlets/
®
receptacles used with GracePorts
®
A: Since GracePorts
options, the default SCCR ratings as dened in the UL 508A
Table SB4.1 apply to the power outlet oerings. OEMs are
required to use current limiting fuses of Class CC type in
the upstream to increase the SCCR rating for the accessory
power outlets used in the GracePorts
panel SCCR ratings. Below is the Short Circuit Current Rating
of the various receptacle outlets oered with GracePorts
• Any outlet with a Circuit Breaker: 0.2kA
• Standard GFCI (RF): 2kA
• Simplex (R): 10kA
• Duplex (RD): 10kA
• High Interrupt GFCI (RX-K10): 10kA
Q: I work for a UL 508 panel shop, do I need to match the
housing rating to my enclosure?
A: For UL 508 panel shops, the UL rating of the housing must
match the rating of the enclosure. It cannot exceed in order
to pass (i.e.: use UL 4X GracePort on UL 4 rated enclosure).
If UL 508 is not needed or desired, a housing can exceed the
rating of the enclosure with no problems.
Q: What is the dierence between a GFCI and Circuit
Breaker?
A: A GFCI is designed with the goal of keeping the operator safe,
if a current leak is detected the current will be interrupted.
This trip can be caused by any imbalance between hot and
neutral lines, even something as small as 4 to 5 milliamps or
if any power is owing through anything other than the circuit
(such as a human). A circuit breaker is designed to protect
your equipment by not allowing your circuit to overheat. For
example, a 5A circuit breaker will not allow over 5A of current
through the circuit.
are oered with variety of power outlet
?
®
to match with their
®
.
Q: What is the GFCI rated for and does the GFCI protect all
three outlets?
A: The exterior duplex outlet is rated for 20A and the inside is
rated for 15A. The unit is UL Recognized up to 15A. All three
outlets are protected by GFCI.
Q: Do you sell components separately?
A: Unfortunately no, we do not sell components separately.
Q: What’s the dierence between Shielded and Unshielded
Ethernet Ports? Do I need a Shielded Port?
A: Shielded Ethernet cables and ports are typically used when
there is high electromagnetic power presence that will
interfere with communication. This is oftentimes found in
welding applications. Typically if you are not aware that you
have a high EMI (Electro-Magnetic Interference) environment,
you will not need the shielded port or cable.
Q: Do Grace Permanent Electrical Safety Devices (PESDs)
work with these housings as well?
A: The Voltage Test Station, which contain a Voltage Indicator
and the Safe-Test Point, will t within the “M” size housings.
Individual PESD Products can be placed in smaller size
housing depending on the application. For more information
on PESDs, please go to www.PESD.com or contact your local
®
sales representative to customize your GracePort
Q: I have an urgent order, can it ship today?
A: We have many GracePort® components readily in stock. If
®
your GracePort
recieved by 11:00am CST many times your GracePort
ship that day.
Q: Can I get my company logo printed on the faceplate?
A: Absolutely! Custom logo and text options are available on
the GracePort
is 600dpi .jpg for submitted text and logos. Contact your local
sales representative for more details.
uses common components and the order is
Expedite fees apply.
®
faceplate. The recommended le resolution
.
®
can
®
GRACEPORT
Enhance Safety and Productivity
in Industrial Control Panels
GRACEPORT® FEATURES
▶ GracePorts® are panel interface connectors that provide safe access to PLC control panels
through closed doors.
▶ Our GracePorts® can be fully customized with a variety of components housing, domestic
and international power options to match your specic application. We can also add your
logo or custom text to make your conguration unique to you.
▶ We oer quick assembly and delivery and ship each GracePort® within 2-3 business days.
▶ Thru-door access enabled by GracePorts® enhances compliance to OSHA, NEC &
NFPA 70E/CSA Z462.
© Grace Technologies, Inc. All rights reserved. Specications are subject to change with/without notice.
GP-GP-DS-EN 2007
Actual product certication will vary
with component selection.
Components
There are various connectors available
and are represented by a two to three digit
code found in between the rst two dashes
of our GracePort® part number layout.
Multiple connectors in a GracePort® are
listed alpha-numerically and multiples of the
same component are followed by # and the
quantity. See the next page for some of our
common components.
BUILD YOUR CUSTOMIZABLE GRACEPORT
®
This is what sets a GracePort® apart from other communication ports. We can create
®
a custom-built GracePort
, including special text, cut-outs, cable lengths, and even
adding your company logo, all in just a few days. Assembled in the USA and created
just the way you want it.
Grace Port® Interface
120VAC, 5A(MAX)
FOR COMPUTER USE ONLY
USB ETHERNET
P-P11R2-K3RF3
E207344
LR110845
Housing Size & UL Rating
Several housing types are available to
meet your needs. The size of your housing
depends on several variables including the
kinds of components you choose, the power
option you want and, in some cases, the UL
rating you need. UL ratings oered include
UL Type 1, 3R, 4, 4X, and 12.
HOUSING OPTIONS
UL Type 1
Indoor use primarily to provide protection against contact with the enclosed equipment and against a limited
amount of falling dirt. Choose from our standard sizes and interfaces or a custom interface to t your exact
requirements. Units can be built with gasketing to oer an extra measure of protection against dust and other
contaminates.
UL Type 4
Either indoor or outdoor use to provide a degree of protection against falling rain, splashing water and
hose-directed water; undamaged by the formation of ice on the enclosure.
UL Type 4X
Either indoor or outdoor use to provide a degree of protection against falling rain, splashing water and
hose-directed water; undamaged by the formation of ice on the enclosure; resists corrosion.
UL Type 3R
In-use extra-duty housings allow items to be plugged in while the cover is closed, which oers added protection
against moisture. Outdoor use to provide a degree of protection against falling rain; undamaged by the
formation of ice on the enclosure. Designed for wet or damp locations.
Circuit Breaker / Power Option
Many power options for international and domestic use are available and are represented by a one to two or three letter
code. Because circuit breakers oer the ability to limit what devices can be run through the GracePort®, we oer dierent
amperages as well.
Over 15,000 unique GracePorts® created
and shipped in 2-3 business days!
NEW TECHNOLOGY
We recently developed a new GracePort® component with USB-C charging functionality that
allows service technicians and PLC programmers to safely charge their laptops and other
handheld devices from outside the door with a USB-C cable.
In addition to the USB-C option, we also now feature an SD Card component. The P46
®
GracePort
use SD Card components. Extending the SD Card connection to the outside of the
cabinet provides a safer and more ecient means of access and programming.
is a great addition to any programmers who routinely access PLCs that
UL Type 12
Indoor use to provide a degree of protection against dust, dirt, ber yings, dripping water and external
condensation of noncorrosive liquids.
Stainless Steel
Keep stainless steel enclosures closed with the #304 or #316 stainless steel GracePort® interface. The 100%
stainless steel GracePort
®
is designed to meet rigorous environments. Also available in a low-prole design.
Surface Mount Heavy Duty
Surface Mount Housings are made from a cast alloy base and are IP65 Rated when installed. These housings
provide excellent protection for GracePort® components and power options from contaminants such as dust
and debris as well as protection from water entry. This makes these types of housings suitable for corrosive
environments and/or areas that require frequent wash downs.
Hazardous Location
The Hazardous Location GracePort® (M7) is intended for environments where the user must do a “sni test” and
typically obtain a “Hazardous Work Permit” before opening the enclosure. The housing is especially well suited
for use with the GracePort Low Prole Circuit Board for ease of eld wiring.
© Grace Technologies, Inc. All rights reserved. Specications are subject to change with/without notice.
Actual product certication will vary
with component selection.
Need to cover an existing HMI or UL Type 1 GracePort®? GracePort®+ has you covered refer to the GracePort+ Datasheet for more information.
© Grace Technologies, Inc. All rights reserved. Specications are subject to change with/without notice.
Actual product certication will vary
with component selection.
Loading...