Grace Design E418, E420 User Manual
Our Spaceba r modu lar
micro phon e posi tioner s are
designed to make a ny m ulti
microphone setup sim ple
and pre cise. Clearly e ngraved
scales fo r angl e and distan ce
make settin g ca psule spacin g,
angle of in cidence, and X a xis
rotation easy and repeatable.
The S pacebar modular
system components can be
purchased in pre-configured
assemblies for se veral standard
micro phon e arrays, o r you
may build a vir tually limitle ss
range of microphone holding
structures to meet a ny n eed.
SB-SUR Surround Tree - Holds 5 microphones
SB-DT Decca Tree - Standard 3 microphone tree (2m x 1m)
All com ponents which feature
microphone mounts come with
American standard 5/8-27
threa ds, or can be ordere d with
European standard 3/8-16
Whitworth threads.
The Spacebar modular system
components are precision
fabricated from machined
aircraft aluminum, b rass, and
stainless s teel. They are light,
strong, and if properly cared for
will last a lifetime.
For complete detail s, visit
www.gracedesign.com
SB-BL
Holds standard
large diaphragm
microphones in a
vertical Blumlien
conguration
(53cm)
SB-TJ90
90 Degree Tube Joiner,
allows any two 7/8”
tubes to be joined at a
90 degree angle
SB-BLRA
Holds RCA 44
type ribbon
microphones in a
vertical Blumlien
conguration
(80cm)
SB-100/200 Straight 1 or 2 meter bar (2m x 1m)
E405
42mm Thumb Nut w/
#10-32 x 7/8” screw
SB-HB
Hanging Bar
SB-MH
Standard Mic
Holder
SB-AMHRA
Adjustable Mic Holder,
right angle
E422
90 Degree Stand Mount
2434 30th Street, Boulder, CO 80301
1-303-443-7454 • Made in the USA
SB-AMH
adjustable mic
holder with
precision angle
scale. 5 degree
markings from
+90 to -90
degrees
SB-SMA
Stand Mount Adapter
with 5/8”-27 thread.
Comes with 3/8-16
European style thread
adapter
E414
Tube End Plug - attaches to the end of
any of the 7/8” tubes.
Provides a threaded
hole for attaching hooks
for guide lines or an
E414 24m thumb screw
to provide a safety stop
for microphone holders
E407
53cm bar
E421
80cm bar
E420
105cm bar
7/8” diameter, laser etched
E418
Tube Joiner - joins any two 7/8”
tubes. Made from 304 stainless
steel - very strong
Loading...