GPX PF719 User Manual

Download

USER’S GUIDE

V:1153-0811-09

PF719

7” Digital Photo Frame

For the most up-to-date version of this User’s Guide, go to www.gpx.com

WARNINGS AND PRECAUTIONS

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• WARNING: To prevent re or shock hazards, do not expose this unit to rain

or moisture.

• CAUTION: Use of controls or adjustments or performance of procedures other

than those specied may result in hazardous radiation exposure.

• WARNING: Changes or modications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to operate the equipment.

• WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.

• WARNING: Use of this unit near uorescent lighting may cause interference

regarding use of the remote. If the unit is displaying erratic behavior move away

from any uorescent lighting, as it may be the cause.

• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.

• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.

• WARNING: The remote control’s button cell battery contains mercury. Do not

put in the trash, instead recycle or dispose of as hazardous waste

• WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.

Main plug is used as disconnect device and it should remain readily operable during intended use.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of

sufcient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

This product utilizes a Class 1 laser to read

Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding

- type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided

for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

GPX | PF7192

FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• The apparatus shall not be exposed to dripping or splashing and

that no objects lled with liquids, such as vases, shall be placed

on apparatus.

L’appareil ne doit pas être exposé aux écoulements ou aux écla-

boussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.

• Main plug is used as disconnect device and it should remain

readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être facile-

ment accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.

• Battery shall not be exposed to excessive heat such as sunshine,

re or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à

la lumière du soleil, au feu ou autres choses de semblable.

• Caution marking is located at the bottom of apparatus.

Les précautions d’emploi sont inscrites en bas de l’appareil.

• The marking information is located at the bottom of apparatus.

Les marquages sont inscrits en bas de l’appareil.

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 3

7” DIGITAL PHOTO FRAME

Features

• 7” LCD color display

• Memory card expansion slot - SD/MMC

• Portrait or landscape

• Image compatibility: JPEG

• Resolution: 480 X 234

• Auto-slide show

• Thumbnail view

• Auto ON/OFF timer option

• 7 pre-loaded pictures

• Black frame and adjustable easel

• 16MB installed ash memory

• USB 2.0 full speed

• AC powered: AC/DC adapter included

Included

• PF719

• Removable Easel

• AC/DC Adapter

GPX | PF7194 GPX | PF7194

TABLE OF CONTENTS

INTRODUCTION

SETUP

CLOCK & CALENDAR

PHOTOS

SETUP MENU

AUTO-POWER

COMPANY INFORMATION

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 5CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 5

INTRODUCTION

Press and hold to power

ENTER ( ►II )

the digital photo frame off

and on. Press to make se-

lections in the menu. Press

to play or pause a photo

slide show.

LCD DISPLAY

Press to skip between photos in thumbnail mode or photo slideshow mode.

Press to navigate left and

SKIP ()

right.

RETURN ()

Press and hold to access the previous menu. Press to navigate up.

MODERETURNENTER

MODE ()

Press and hold to return to the main menu. Press to navigate down.

GPX | PF7196 GPX | PF7196

USB INPUT

(THUMBDRIVE or

FLASH DRIVE ONLY)

THUMB DRIVE

SD/MMC

DC IN 5V

SD/MMC Memory Card Expansion Slot

POWER INPUT

EASEL

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 7CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 7

SETUP

Power

Plug the included AC/DC adapter into the POWER INPUT on the digital photo frame, and a standard AC power outlet to power the digital photo frame.

Easel Setup

The Easel on the back of the unit can be attached so that the digital photo frame sits in either landscape mode or portrait mode.

Wall Mount Setup

The Easel must be removed from the digital photo frame when mounting it to a wall.

Use one of the two Easel connections on the back of the unit to hang the digital photo frame on a nail or a screw.

It is recommended that you only hang the digital photo frame on a nail or screw that is securely driven into a wall stud.

THUMB DRIVE

SD/MMC

DC IN 5V

GPX | PF7198

CLOCK & CALENDAR

Setting the Clock

1 From the main menu, highlight

the Clock icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

2 Press the arrow () buttons

to highlight "Set Time". Press the ENTER ( ►II ) button.

3 Press the left and right arrow ()

buttons to switch between hour, minute, and second.

4 Press the up and down arrow

buttons () to adjust the hour, minute, and second.

5 Highlight "OK" and press the

ENTER ( ►II ) button to set the adjusted time.

Setting the Calendar

1 From the main menu, highlight

the Calendar icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

2 Press the arrow () buttons

to highlight "Set Date". Press the ENTER ( ►II ) button.

3 Press the left and right arrow ()

buttons to switch between year, month, and date.

4 Press the up and down arrow

buttons () to adjust the year, month, and date.

5 Highlight "OK" and press the

ENTER ( ►II ) button to set the adjusted date.

Displaying the Clock & Calendar

1 From the main menu, press and

hold the MODE button once to display the Calendar. Press and hold the MODE button with the calendar displayed to view the clock.

To access the main menu, press and hold the MODE button.

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 9

PHOTOS

SD/MMC

THUMB DRIVE

SD/MMC

THUMB DRIVE

DC IN 5V

SD/MMC

THUMB DRIVE

DC IN 5V

MMC

Loading Photos

Photos can be loaded onto the unit from three different source, a USB thumb/flash drive, a SD memory card, or an MMC memory card.

FILE REQUIREMENT: JPEG

1 Connect a USB thumb/flash drive

to the digital photo frame.

2 From the main menu, highlight

the Photo icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

Saving Photos to the Frame

USB Thumb/Flash Drive

SD Memory Card

MMC Memory Card

1 Connect a USB thumb/flash drive

to the digital photo frame.

2 From the main menu, highlight

the Copy/Delete icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

3 Select "Copy", and press the

ENTER ( ►II ) button.

4 Select the image you wish to copy,

and press the ENTER ( ►II ) button.

5 Highlight "Save", and press the

ENTER ( ►II ) button.

GPX | PF71910

Copied photos can be accessed by going to the main menu, then selecting "Memory".

Playing a Photo Slideshow

1 From the main menu, highlight

the Photo icon to view photos from a connected Thumb Drive, SD Card, or MMC Card. Highlight the Memory icon to view photos stored on the digital photo frame. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

2 Press and hold the RETURN

() button to view photos in

Thumbnail mode.

3 Press the ENTER ( ►II ) button to

begin playing a photo slideshow.

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 11

SETUP MENU

Opening the Setup Menu

1 From the main menu, highlight

the Setup icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

This will give you access to the setup menu.

Setup Menu Map

Photo Setting

• Interval Time

• Transition Effect

• Show Type

• Browse

Auto-play

• Slide

Display Setup

• TFT Brightness

• TFT Contrast

• TFT Saturation

Custom Setup

• OSD Language

• Style

• Media

• Default

Exit

GPX | PF71912

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 13

AUTO-POWER

Auto-Power

1 From the main menu, highlight

the Auto Power icon using the arrow () buttons. Press the ENTER ( ►II ) button.

To access the main menu, press and hold the MODE button.

2 Highlight "Set Time" and press the

ENTER ( ►II ) button.

3 Select Power On to set a time for

the digital photo frame to turn on. Select Power Off to set a time for the digital photo frame to turn off. Press the ENTER ( ►II ) button.

4 Press the left and right arrow ()

buttons to switch between hour and minute.

5 Press the up and down arrow

buttons () to adjust the hour and minute.

6 After the desired time is set,

highlight the "OK" button and press the ENTER ( ►II ) button.

7 If you set "Power On", highlight

"Power On Enable". If you set "Power Off", highlight "Power Off Enable". Press the ENTER ( ►II ) button.

8 Highlight "On" and press the

ENTER ( ►II ) button to enable to set auto-power timer.

GPX | PF71914

Disabling the Auto-Power

1 To cancel the auto power on or

off setting, highlight "Power On Enable" or "Power Off Enable", depending on which is set, and press the ENTER ( ►II ) button.

2 Highlight "Off" and press the

ENTER ( ►II ) button to disable to auto-power timer.

CUSTOMER HELPLINE | 1-314-621-2881 GPX | PF719 15

GPX PF719 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual