GPX MW353 User Manual

Skip/Search

Press to skip.

Press and

hold to search

through tracks.

Menu

Press to access the menu and make

selections. Use the Skip/Search

buttons to navigate the menu.

In Play mode, press to set the EQ or repeat

settings. In Pause mode, press to access

the local folder and delete options.

Play/Pause/Power

Press to play or

pause the audio

player. Press and

hold to power the

unit on or o.

OFF

ON

RESET

HOLD

Volume

Press to adjust

the volume.

Stereo

Headphone

Jack

Microphone

Belt Clip

Micro-

USB Port

Reset

Hold

Slide to the On
position to enter
Hold mode.

Loading music

1. Connect the digital audio player to
a computer using the Micro-USB
Port and a USB cable (included).

2. Once connected, the unit will show
up on the connected computer as if it
were a connected USB thumb drive,
external hard drive, or memory card.

3. Drag and drop the desired audio
les into the unit’s drive location
on the connected computer.

4. After the les are loaded onto the
unit, right-click on the drive and
eject it from the computer, then
disconnect the USB cable.

Music