GPX KL1008S Owner's Manual

KL1008S

INSTRUCTION MANUAL

Contents

Warnings & Precautions 2

Important Safety Instructions 3

What’s in the Box & Features 4

Mounting the Unit & Powering the Unit 5

Setting the Clock 6

Connecting to a TV Signal 7

AM / FM Radio & Station Presets 8

Setting the Timer 9

Audio & Video Inputs 10

Special Features 11

Controls & Denitions 12-18

Contact Information 20

Warnings and Precautions

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This symbol, located on back or bottom of the

unit, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude to

constitute a risk of electric shock to persons.

This symbol, located on back or bottom of the

unit, is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

WARNING: Use of this unit near uorescent

lighting may cause interference regarding use of the

remote. If the unit is displaying erratic behavior

move away from any uorescent lighting, as it may

be the cause.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

To reduce the risk of electric shock, do not remove

cover (or back). There are no user-serviceable parts

inside. Please refer any servicing to qualied service

personnel.

WARNING: Changes or modications to this unit

not expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

WARNING: Danger of explosion if the remote

control’s batteries are incorrectly installed. Replace

only with the same or equivalent battery.

WARNING: The remote control’s button cell

battery contains mercury. Do not put in the trash,

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

instead recycle or dispose of as hazardous waste

2

Important Safety Instructions

1. Read these instructions. All the safety
and operating instruction should be read
before the product is operated.

2. Keep these instructions. The safety and
operating instruction should be retained for
future reference.

3. Heed all warnings. All warning on the
product and in the operating instructions
should be adhered to.

4. Follow all instructions. All operating and
use instructions should be followed.

5. Water and Moisture: Do not use this
product near water - for example, near a bath
tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement, or near a swimming
pool, and the like. The apparatus shall not be
exposed to dripping or splashing and that no

objects lled with liquids, such as vases, shall

be placed on apparatus.

6. Cleaning: Clean only with a dry cloth.
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners.

7. Ventilation: Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing
the product on a bed, sofa, rug, or other simi­lar surface. This product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer’s instructions have been
adhered to.

8. Heat: Do not install near any heat sources
such as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

9. Grounding or Polarization: Do not
defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If

the provided plug does not t into your outlet,

consult an electrician for replacement of the
obsolete outlet.

10. Power-Cord Protection: Protect the
power cord from being walked on or pinched
particularly at plugs, convenience receptacles,
and the point where they exit from the ap­paratus.

11. Accessories: Only use attachments/ac-

cessories specied by the manufacturer. Do

not place this product on an unstable cart,
stand tripod, bracket, or table. The product
may fall, causing serious injury to a child
or adult, and serious damage to the product.

Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting ac­cessory recommended by the manufacturer.

12. A product and cart combination should
be moved with care. Use only with the cart,

stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus.
When a cart is used, use caution when mov­ing the cart/apparatus combination to avoid
injury from tip-over.

13. Lightning: Unplug this apparatus and
disconnect the antenna or cable system during
lightning storms or when unused for long
periods of time. This will prevent damage to
the product due to lightning and power-line
surges.

14. Servicing: Do not attempt to service this
product yourself as opening or removing cov­ers may expose you to dangerous voltage or

other hazards . Refer all servicing to qualied

service personnel.

15. Power Sources: Only connect to the type
of house-hold power supply as indicated in
the operating instructions and rating label. If
you are not sure of the type of power supply
to your home, consult your product dealer or
local power company. For products intended
to operate from battery power, or other
sources, refer to the operating instruction.

16. Overloading: Do not overload wall
outlets or extension cords as this can result in

a risk of re or electric shock.

17. Object and Liquid Entry: Never push
objects of any kind or spill liquid into this
product through openings as this could result

in a risk of re or electric shock.

18. Replacement Parts and Safety Check:
When replacement parts are required, be sure
the service technician has used replacement

parts specied by the manufacturer. Ask the

service technician to perform safety checks to

ensure proper operation to avoid possible re,

electric shock, or other hazards.

19. Outdoor Antenna Grounding: If an
outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides in­formation with regard to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna connection
to grounding electrodes, and requirements for
the grounding electrode.

20. Wall or Ceiling Mounting: The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.

21. Where the AC plug or an appliance
coupler is used as the disconnect device, the
disconnect device shall remain readily oper­able.

22. Protective Attachment Plug: The
product is equipped with an attachment plug
having overload protection. This is a safety
feature. See Instruction Manual for replace­ment or resetting of protective device. If
replacement of the plug is required, be sure
the service technician has used a replacement

plug specied by the manufacturer that has

the same overload protection as the original
plug.

23. Power Lines: An outside antenna sys­tem should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might
be fatal.

3

What’s in the Box

MEM/CLOCKADJ.

BAND

EQ

TVRADIO

DISPLAY

TUNE/CLK

TIMER

VOLUME

CH

TV

SCAN

TV

MODE

CH

TV

SCAN

TV

MOD

E

AU

DI

O

EP

G

INFO

SKIP

SETUP

TFT

VO

L

.

UP

DISP

SET

FUNCTIO

N

ST

ANDB

Y

AIR/C

AT

V

WID

E

O

N

/O

F

F

MEM+

TIME

R

BA

N

D

DN

TU

N

E/

C

LK

MEN

U

TV

ENTE

R

M

EM

/
C

LK

TFT

UnderCabinet LCD TV

4-Spacers and 4 Screws

• UnderCabinet LCD TV

• Remote Control

• Mounting Template

• 4 - Screws

• 4 - Spacers

• Documentation

Features

• Adjustable LCD TV Screen

• 181-Channel Cable-Ready Tuner

• Digital TV Tuner built in

• Digital Tune AM/FM Stereo Radio with
Station Presets

• LCD Display with Blue Backlight

• Digital Clock with Timer

• Timer sounds to Alarm or Radio

• LCD Screen swivels for variable viewing
angles

Remote
Control

• 2 sets of Audio/Video Input Jacks

• Dual Front-Firing Speakers Built-In

• FM Wire Antenna

• AC Powered, Built-In AC Line Cord

• Battery Back-Up for clock only.

• Uses 2-”AAA” Batteries for back-up, (not
included)

4

Mounting the Unit

FM ANT

AC~

DC 12V

VIDEO IN AUDIO IN

R L

TV ANT

To mount the unit under a cabinet, follow the directions on the included Mounting Template.

Powering the Unit

AC 120V / 60Hz

1. To power the unit, simply connect it to an AC outlet using the attached AC cord.

2. The plastic extensions on the back of the unit provide a holder for excess cord.

5

Setting the Clock

BAND

EQ

RADIO

DISPLAY

TIMER

TV

VOLUME

CH

TV

SCAN

TV

MODE

CH

BAND

EQ

R

ADI

O

DISPLA

TIMER

TV

V

OLUME

C

H

SCAN

MOD

E

C

H

TUNE/CLK

MEM/CLOCK ADJ.

1. Plug the unit into a standard 120V outlet.

See “Powering the Unit” on page 2.

2. Before pressing the Standby Button, press
and hold the Mem/Clock Adj. Button for 2
seconds.

3. Use the Tune/Clk Buttons to choose
between 12HR and 24HR. Press the Mem/
Clock Adj. Button to make the selection.

The hour number will blink to indicate that it

is being changed.

4. Use the Tune/Clk Buttons to choose the
current hour. Press the Mem/Clock Adj.
Button to make the selection.

The minute number will blink to indicate that

it is being changed.

5. Use the Tune/Clk Buttons to choose the
current minute. Press the Mem/Clock Adj.
Button to make the selection.

The time will blink several times to indicate

that the time has been set.

6. Press the Display Button to view the time
when in AV Input Mode, Radio Mode, or TV
Mode,

6