Important Safety Instructions ....................................................................................................................3
What’s in the Box & Features ...................................................................................................................4
Mounting the Unit & Powering the Unit.....................................................................................................5
Setting the Clock ......................................................................................................................................6
Connecting to a TV Signal ........................................................................................................................7
Audio/Video Input: Connecting a Set-Top Box .........................................................................................8
Tuning the AM & FM Radio & Creating Station Presets ...........................................................................9
Programming a DVD or CD ......................................................................................................................10
Setting the Timer to Turn the Unit On or Off .............................................................................................11
TV Setup Menu.........................................................................................................................................18
DVD Setup Menu......................................................................................................................................19
Contact Information ..................................................................................................................................20
Warnings and Precautions
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol, located on back or bottom of the
unit, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
This symbol, located on back or bottom of the
unit, is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING: Use of this unit near uorescent
lighting may cause interference regarding use of the
remote. If the unit is displaying erratic behavior
move away from any uorescent lighting, as it may
be the cause.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
To reduce the risk of electric shock, do not remove
cover (or back). There are no user-serviceable parts
inside. Please refer any servicing to qualied service
personnel.
WARNING: Changes or modications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
WARNING: Danger of explosion if the remote
control’s batteries are incorrectly installed. Replace
only with the same or equivalent battery.
WARNING: The remote control’s button cell
battery contains mercury. Do not put in the trash,
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
instead recycle or dispose of as hazardous waste
2
Important Safety Instructions
1.Read these instructions. All the safety
and operating instruction should be read
before the product is operated.
2. Keep these instructions. The safety and
operating instruction should be retained for
future reference.
3. Heed all warnings. All warning on the
product and in the operating instructions
should be adhered to.
4. Follow all instructions. All operating and
use instructions should be followed.
5. Water and Moisture: Do not use this
product near water - for example, near a bath
tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement, or near a swimming
pool, and the like. The apparatus shall not be
exposed to dripping or splashing and that no
objects lled with liquids, such as vases, shall
be placed on apparatus.
6. Cleaning: Clean only with a dry cloth.
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners.
7.Ventilation: Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer’s instructions have been
adhered to.
8. Heat: Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
9. Grounding or Polarization: Do not
defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If
the provided plug does not t into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Power-Cord Protection: Protect the
power cord from being walked on or pinched
particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Accessories: Only use attachments/ac-
cessories specied by the manufacturer. Do
not place this product on an unstable cart,
stand tripod, bracket, or table. The product
may fall, causing serious injury to a child
or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the manufacturer.
12. A product and cart combination should
be moved with care. Use only with the cart,
stand, tripod, bracket, or table specied by
the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Lightning: Unplug this apparatus and
disconnect the antenna or cable system during
lightning storms or when unused for long
periods of time. This will prevent damage to
the product due to lightning and power-line
surges.
14. Servicing: Do not attempt to service this
product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards . Refer all servicing to qualied
service personnel.
15. Power Sources: Only connect to the type
of house-hold power supply as indicated in
the operating instructions and rating label. If
you are not sure of the type of power supply
to your home, consult your product dealer or
local power company. For products intended
to operate from battery power, or other
sources, refer to the operating instruction.
16.Overloading: Do not overload wall
outlets or extension cords as this can result in
a risk of re or electric shock.
17.Object and Liquid Entry: Never push
objects of any kind or spill liquid into this
product through openings as this could result
in a risk of re or electric shock.
18. Replacement Parts and Safety Check:
When replacement parts are required, be sure
the service technician has used replacement
parts specied by the manufacturer. Ask the
service technician to perform safety checks to
ensure proper operation to avoid possible re,
electric shock, or other hazards.
19.Outdoor Antenna Grounding: If an
outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna connection
to grounding electrodes, and requirements for
the grounding electrode.
20.Wall or Ceiling Mounting: The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
21. Where the AC plug or an appliance
coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
22.Protective Attachment Plug: The
product is equipped with an attachment plug
having overload protection. This is a safety
feature. See Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure
the service technician has used a replacement
plug specied by the manufacturer that has
the same overload protection as the original
plug.
23. PowerLines: An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might
be fatal.
3
T
V
S
C
A
N
T
V
M
O
D
E
A
U
D
IO
E
P
G
IN
F
O
S
K
I
P
S
E
T
U
P
T
F
T
V
O
L
.
U
P
D
IS
P
S
E
T
F
U
NC
T
IO
N
S
T
A
N
D
B
Y
A
IR
/
C
A
T
V
W
ID
E
O
N
/
O
F
F
M
E
M
+
T
IM
E
R
B
A
N
D
D
N
T
U
N
E
/
C
L
K
M
E
N
U
T
V
E
N
T
E
R
M
E
M
/
C
L
K
T
F
T
MEM UP
DOWN
UP
DOWN
UP
TV MODE
TV
TV CHANNEL
STOP/BAND
PLAY/PAUSE
TIMER
TUNER
DVD
OPEN/CLOSE
EQ
VOLUME
What’s in the Box
UnderCabinet LCD TV
4-Spacers and 4 Screws
• UnderCabinet LCD TV
• Remote Control
• Mounting Template
• 4 - Screws
• 4 - Spacers
• Documentation
Features
• Drawer-Load DVD/CD/CDR/CD-RW/
JPEG Player
• 8.1” LCD TV Screen
• 181-Channel Cable-Ready NTSC Tuner
• Digital TV Tuner
• Digital Tune AM/FM Stereo Radio with
Station Memory Preset
• LCD Display with Blue Backlight
• Digital Clock with Timer
• LCD Screen swivels for variable viewing
angles
• Soft-Touch Remote Control, Remote
Battery included
4
Remote
Control
• Auxiliary Audio/Video Input Jacks
• FM Wire Antenna
• Built-In Full Range Speakers
• AC-Powered, built-in Line Cord
• Battery Back-Up remembers the time during
power failure
• Uses 2- “AAA” Batteries for back-up, (not
included)
• Under-Cabinet Mounting Template, Screws
and Spacers, included
Mounting the Unit
TV ANT
FM ANT
VIDEO INAUDIO IN
RL
TV ANT
AC~
To mount the unit under a cabinet, follow the directions on the included Mounting Template.
Powering the Unit
AC 120V / 60Hz
1. To power the unit, simply connect it to an AC outlet using the attached AC cord.
2. The plastic extensions on the back of the unit provide a holder for excess cord.
5
Setting the Clock
MEM UP
DOWN
UP
TV MODE
TV
TV CHANNEL
STOP/BAND
PLAY/PAUSE
TIMER
TUNER
DVD
OPEN/CLOSE
EQ
VOLUME
MEM
UP
DOWN
UP
T
V MOD
E
TV C
HANNE
L
S
TOP/BAND
Y/P
USE
TUNER
DVD
O
PEN/CLOSE
EQ
VOLU
ME
DOWN
UP
1. Plug the unit into a standard 120V outlet.
See “Powering the Unit” on page 5.
2. Before pressing the Power Button, press and
hold the Play Mode/MEM/CLK Set Button
for 2 seconds.
3. Use the CLK/Skip/Search/Tuning Buttons Button to choose between 12HR and 24HR.
Press the Play Mode/MEM/CLK Set Button to make the selection.
The hour number will blink to indicate that it
is being changed.
4. Use the CLK/Skip/Search/Tuning Buttons
to choose the current hour. Press the Play Mode/MEM/CLK Set Button to make the
selection.
The minute number will blink to indicate that
it is being changed.
5. Use the CLK/Skip/Search/Tuning Buttons
to choose the current minute. Press the Play Mode/MEM/CLK Set Button to make the
selection.
The time will blink several times to indicate
that the time has been set.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.