GP Systems BioSmart PV-WTC-EM, BioSmart PV-WTC-MF, BioSmart PV-WTC-HD, BioSmart PV-WTC-LG Installation Manual

1

BioSmart PV-WTC
Terminal

Installation guide

2

3

TABLE OF CONTENTS

GENERAL PRODUCT INFORMATION ..................................................................4

1. SPECIFICATIONS .................................................................................................5

1.1 BioSmart PV-WTC models .........................................................................5

1.2 Basic specifications ...................................................................................5

1.3 Factory settings .........................................................................................6

1.4 Package contents .......................................................................................6

2. USE, TRANSPORTATION AND STORAGE CONDITIONS .......................................6

3. SAFETY REQUIREMENTS ....................................................................................6

4. DISPOSAL ............................................................................................................7

5. MANUFACTURER’S GUARANTEE ........................................................................7

6. INSPECTION CERTIFICATE ..................................................................................7

7. TERMINAL DESCRIPTION ....................................................................................8

7.1 Description of terminal’s front panel ..........................................................8

7.2 Description of connection ports ................................................................10

7.3 Description of indicators and circuit board jumpers..................................11

8. INSTALLATION .....................................................................................................11

8.1 Installation notes ........................................................................................11

8.2 Installation procedure ................................................................................12

8.3 Connecting the terminal’s power supply ....................................................14

8.4 Connecting the terminal to an Ethernet network .......................................15

8.5 Connecting an electromechanical lock to the terminal’s circuit board......17

8.6 Connecting an electromagnetic lock through the BioSmart BCR ..............18

8.7 Connecting an entry sensor and control buttons ......................................19

8.8 Connecting to an external controller through Wiegand .............................20

9. CONFIGURING NETWORK PARAMETERS ............................................................21

10. ENSURING OF THE OPERATION ..........................................................................22

4

Dear customers!

Thank you for purchasing our product. With proper installation and use, this device will

bring you many years of reliable service.

GENERAL PRODUCT INFORMATION

The BioSmart PV-WTC work and attendance terminal is designed for use as part of the

BioSmart biometric access monitoring and control system. The terminal provides a means

to track working hours and attendance by identifying users through the unique biometric

characteristics of subcutaneous palm veins and RFID proximity cards. It can also be used

for access monitoring and control.

Compatible with BioSmart-Studio software version V5.0.3.269 and above.

Four models of this terminal are available:

- With Em-Marin (EM) card format scanner;

- With Mifare (MF) card format scanner;

- With HID iClass and HID Prox (HD) card format scanner;

- With Legic (LG) card format scanner.

5

1. SPECIFICATIONS

1.1 BioSmart PV-WTC models

Designation Device serial number

BioSmart PV-WTC-EM

BioSmart PV-WTC-MF

BioSmart PV-WTC-HD

BioSmart PV-WTC-LG

1.2 Basic specifications

Palm vein scanner type Optical, infrared

Maximum number of users* 1,000,000

Maximum number of card codes 1,000,000

Maximum number of palms

300,000

Maximum number of events

10,000,000

1:1000 vein matching identification time, sec

not longer than 2

False acceptance rate, % **

0.00008

Integrated RFID card scanner

Yes

Card scanning range, mm

up to 100

Display

TFT 3.5” 320х240

Keyboard

keypad, 12 buttons

BioSmart relay module support

Yes

Connection interface with computer

Ethernet

USB interface for configuration

USB 2.0

Web interface for configuration

Yes

Wiegand 26-40 bit output interface

Yes

On-board relay

12 VDC, 1 А

Number of discrete inputs, pcs

1

Power supply specifications

12 VDC±15%, 1 A

Outer dimensions (L x W x H), mm

215х150х117

Net weight, g

820

Gross weight, g

1270

Operating temperature range, °С

from 0 to plus 50

Operating relative air humidity, %

not higher than 90

Design

Detachable plastic body

6

1.3 Factory settings

Terminal’s IP address 175.25.110.71

Terminal’s network address Serial number

Administrator password

No password

1.4 Package contents

Item Number, pcs.

BioSmart PV-WTC Terminal 1

Product certificate 1

Installation instructions 1

Mounting kit (two 6х35 dowels, two

3.5х38 self-tapping screws)

1

2. USE, TRANSPORTATION AND STORAGE
CONDITIONS

Abrasive or chemically active materials should not be used to clean the outer surfaces of the device

or the palm vein scanner.

The terminal may be stored in the following environmental conditions:

- ambient air temperature from minus 40 to plus 50 °С;

- relative air humidity (without condensation) up to 98%.

Water, dust and other foreign substances should be prevented from entering the inside of the
terminal during transportation and storage. Following storage of the terminal in low temperature or
high humidity conditions, it must be kept in a dry environment at a temperature of (20±5) °С for no
less than 30 minutes before being turned on.

3. SAFETY REQUIREMENTS

To avoid malfunctions in the terminal, it must be disconnected from its power source before any
work is carried out with its case open.

Only specialists authorized by the manufacturers of this terminal should carry out the repair and
replacement of terminal parts.

7

4. DISPOSAL

The BioSmart PV-WTC terminal does not contain materials hazardous to the health of users or the
environment. No special ecological safety measures are required when disposing of this unit at the
end of its operational lifespan.

5. MANUFACTURER’S GUARANTEE

The manufacturer guarantees successful performance and correspondence to the stated product
characteristics on the condition that the consumer complies with the rules of its use, installation,
connection, transportation and storage.

The manufacturer provides a warranty on the BioSmart PV-WTC terminal for the period of 60
months from the day of sale indicated in its certificate.

If notes on the date of the product’s sale are absent from the certificate, the warranty period is
calculated from its manufacturing date.

The Manufacturer’s Warranty does not extend to BioSmart PV-WTC terminals that have broken
down due to the Customer failing to comply with its rules of operation.

6. INSPECTION CERTIFICATE

BioSmart PV-WTC- terminal, assembly no.
has been classified as fit for use.

Issue date

P r o d u c t i o n M a n a g e r

(signature)

(print full name)

Manufacturer:

GP Systems GmbH

Ochshäuser Str. 45

34123 Kassel Germany

e-mail: [e-mail]

Tel. [phone]

8

7. TERMINAL DESCRIPTION

7.1 Description of terminal’s front panel

An exterior view of the terminal is shown on figure 1.

Figure 1. Exterior view of BioSmart PV-WTC terminal

1. Smart card reader

2. LCD screen

3. Keypad

4. Palm vein scanner