Page 1/ 35
HN-2000
GPS_DESIGNER Personal Navigator
User manual and Reference guide
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 2/ 35
Warnings
WARNINGS
Some certain knowledge is required to be well known by the user for
proper and safe use of GPS_DESIGNER GPS handheld receiver. Please
read this User’s Manual first before operation.
This product can help the user to find out his way and orient him in
travelling, BUT it can not totally replace the user’s own personal
judgement. Never lose your own reasonable judgement and solely rely
on one device.
Because GPS_DESIGNER is an assistant device, it will NOT undertake
any legal responsibility for any accident or damage caused by the user’s
wrong operation and/or wrong judgement in navigating with
GPS_DESIGNER.
CAUTION
The Global Positioning System(GPS) is a system of 24 satellites which
circle the earth twice a day in a very precise orbit and transmit
information to earth. The GPS_DESIGNER must continuously find at
least three of these satellites to calculate your position and your
movement.
This GPS system is operated by the government of the United States,
which is solely responsible for its accuracy and maintenance. Any
changes of the system could affect the accuracy and performance of all
GPS equipment.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 3/ 35
TThhaannkk yyoouu ffoorr cchhoooossiinngg GGPPSS__DDEESSIIGGNNEERR GGPPSS hhaannddhheelldd rreecceeiivveerr!!
IItt wwiillll nneevveerr lleett yyoouu lloossee yyoouurrsseellff nnoo mmaatttteerr wwhheerree yyoouu aarree..
TTaakkee iitt nnooww
------------iitt ccaann bbee yyoouurr bbeesstt ffrriieenndd!
!
Application Conditions:
GPS_DESIGNER is designed for outdoors navigation in the
temperature range of -20°C~ 70°C. So please use GPS_DESIGNER at
an open place with a clear sky in the suitable environment since the
surrounding environment will surely affect the satellite signals
reception and device work efficiency.
Introduction section gives you a general overview of
GPS_DESIGNER features.
Reference section tells how to operate the unit to locate and record
your position, how to set up a route or record a track, and how to be
guided with this unit specifically in more details.
Standard Package:
• A GPS_DESIGNER GPS handheld receiver
•A User’s Manual
If you find something missing or damaged with the reference
to the standard package, please contact the local dealer or retailer.
Introduction
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 4/ 35
Reference
• Unit Features
• Battery installation & Keypad
• Start up the unit
• Operation Structure
• Main pages
Battery
Compartment
Waterproof
housing
Internal GPS
Antenna
UP / DOWN /
RIGHT / LEFT/ ENTER
keypads
LCD Display
ESCAPE
keypad
POWER
keypad
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 5/ 35
Battery Installation
1. Turn battery cover screw counterclockwise until the battery cover can
be removed.
2. Insert two new AA(or rechargeable) 1.5 V batteries as shown in the left
picture, be sure to check the polarity, and replace the battery cover.
3. Replace the screw and turn the screw clockwise until the battery cover
is held securely. While the battery cover does provide the waterproofing
seal to the batteries, you should avoid over-tightening the battery door
screw.
NNOOTTE
E：Battery life varies due to variety of factors, including
temperature and back-lighting usage. Rechargeable batteries can
also be used except that batteries state is not always correctly
informed in the GPS_DESIGNER. An internal lithium battery will
retain your data while you’re changing AA(or rechargeable)
batteries.
ESCAPE key
• switches among four main pages
• cancels current operation
• backs to last step or last page
POWER key
• turns the unit off and on
• turns the back-light off and on
UP / DOWN / RIGHT / LEFT/ ENTER key
• highlights menu options and enters data
• controls cursor movement on the map page
• adjusts screen lightness and map display scale
• initiates entry and accepts the selected value
• enters MENU page
Reference
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 6/ 35
To start up the GPS_DESIGNER, you should take the unit outside and find an
open area where the built-in antenna has a clear view of the sky.
Turning the GPS_DESIGNER on
1. Press POWER key until you hear a sound of “B” and the Welcome page appears.
2. Press ESCAPE key continuously, the four main pages come out in order. Press ENTER
key from some of these main pages, you can enter MENU page and start operation as
stated below.
Turning the GPS_DESIGNER off
Press and hold POWER key for about 3 seconds until the screen goes blank.
Turning the back-lighting
In any step of the operation, just press POWER key to turn it on and off.
NNOOTTE
E：When you use the unit for the first time, it
will take 5 minutes to track the satellites and fix
position for the unit. After the first use, it will only take
you less than one minute at the beginning for each
time .
If batteries do not have enough power to support the
unit operation at the very beginning, the unit will alarm
and turn off in about two minute automatically.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 7/ 35
The GPS_DESIGNER operation is organized into four
main pages: the Satellite Page, the Navigation page ,
the
Position Page , and the Map Page
. Normally, every time
you turn on the GPS_DESIGNER, you’d better switch
into Satellite page and check satellites status first then
start operation.
When you press POWER key to start up the unit, you
can press ESCAPE key to switch
among these four main
pages. And from this main pages, press ENTER
key, the
unit pops up the Menu page. Here you could select
specific section you want to enter and make further
operation.
In the Menu page, there are twelve options: MARK,
W_LIST, R_LIST, T_LIST , P_WPT,SETUP ,
MEASURE,FIND,H & F,S & M,TOOLS,COMMU.
Press UP / DOWN key to highlight the option you want,
and then press ENTER
key, you are able to go on further
operation. Or press ESCAPE
key in the Menu page, you
can withdraw
from Menu page and back to those four
main pages.If you want to lock the screen, press long
up key;ulock the screen, press long up key.
re
Operation Structure
3
E
S
C
A P E
1
2 4
ESC
APE or
Wait for 30
sec
onds
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 8/ 35
The Satellite page
• This page informs you mainly on the satellites
distribution and satellite signal strength. Normally, the
unit needs at least three satellites in connection for data
processing. You should check the icon at the left top of
this page first. It plays the same role as defined in the
Position page.
• Here two circles are used to describe satellites
distribution scope. All satellites will scatter within or
along the bigger circle. If the satellite icon is blank, this
satellite is just found; if it is filled with blackness, its
signal is engaged in data processing.
• The columns in the half lower part of the page tell you
the strength of satellites signals. The higher the column,
the stronger the signal. If the column is blank, it means
this satellite signal does not take part in location
computing. Below the column is the satellite ID number.
The Singnal-to-Noise show the Singnal of the GPS.
Main Pages
Batteries display
Orientation status
Main menu Select status
•Satellite position in the
space
• The user’s position
Singnal-to-Noise
•Satellite Signal state
• Satellite ID number
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 9/ 35
Main Pages
The Navigation page
This page makes very essential direction when you are under navigation. It orients
you to your destination, tells you how far away you are from your destination, and
your actual movement speed, and the route or track name you are using for
navigation. The arrow in the middle always points to the direction you are
advancing (in another word, it is Head-up direction).So you can judge your
moving direction by the compass. Once you stop advancing, the arrow will return
to North after 2-3 seconds. The dot in the ring shows the reference orientation of
next waypoint or destination.
It displays the information about your current location, including longitude,
latitude, COG, SOG ,etc, you can use the UP/ DOWN keypads to choose the
content.
NNOOTTE
E:
• The date and time here is collected from the satellite, there is no clock in
GPS_DESIGNER.
• At the left top of the page, the icon of means all the information displayed is
invalid; but the icon of means valid. So it is very important for you to check
this icon during operation.
Moving direction
North latitude
East longitude
Show route
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 10/ 35
The Position page
This page shows the current location of the main information and time
information.
Then can use up/down button to select the district or the provision of data
definition Gaussian parameters.
Under the definition of data by Enter key areas, the system automatically
selected latitude and longitude, according to Enter key pop-up pages can
choose or plane coordinates of latitude, longitude coordinates.
Gaussian parameters set by Enter, the system set up pages pop Gaussian
parameters, you can set up inside the parameters of good keeping can be
installed, automatically returned to the Position page.
Gaussian parameters:
Yf: things deviation units: m
Lf: Central Meridian
Df: projection ratio (usually set to 1.0 or 0.9996)
Xf: North-South bias unit: m (usually 0)
Yf, Lf, Df, Xf for modification of data, between the four of the Enter key
sequence can be used to choose, every available place in the left / right to
choose, and use up / down keys to change, after the completion of revision can
be preserved.
Main Pages
DOWN AND
ENTER
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 11/ 35
The Map page
This page shows the map information.
Use left / right can set the map scale, the use of the menu pages in the map
information can be used up / down button to select Ramble, Show Data,
Measure DIS.
Ramble: You can use up / down / left / right to view the vicinity map showing
the location of the cursor position at the same time showed that, by switched
button can return.
Show Data: the main display current location of latitude and longitude data,
Press Enter key areas can choose to Hide data and Change Data, keys can be
switched by the return.
Hidden data : hidden longitude, latitude, heading, speed, altitude, distance,
and other data.
Change Data: What can show longitude, latitude, heading, speed, altitude,
distance, and other data.
Measuring DIS: Measuring current location and the distance between the cursor
position, also showed that perspective, the keys can be switched by the return.
Main Pages
ENTER
ENTER ENTER
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 12/ 35
After the elections, Press Enter keys to enter the "Save WPT" screen by
switching on a screen button to return.
Referenc
e
Mark
Enter
Each column for the anti-selected color, background
color, Press Enter key to enter edit, edit success, bond set
by the state to set aside editor, if editors want to jump out
when the bond directly by switching from edit, edit
circumstances is not the arrow keys can be switched
according to the column.
Switching between preservation and use canceled about
key. If they choose to preserve button will preserve this
destinations in destinations table, the specific operation of
flights from Table View.
Others: name each character can be installed in 26 casesensitive letters and (0-9) 10 digital switching between;
coordinate settings, each figure in the 0-9
intergovernmental transform, said latitude N, S said south
latitude, said E N, W said W; height settings, each figure
can be in the 0-9 intergovernmental transform, m length
of said units meters installed after completion or retention
of withdrawal or cancellation of operation.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 13/ 35
W
aypoint List
Editing a Waypoint:
1.Press ENTER key in Waypoint List page and see a sub-menu
2.Press UP/ DOWN keys to highlight Edit item
3.Press ENTER key again and enter Waypoint Edit page
4.Now follow the step4, 5 & 6 as described to build a Waypoint
Deleting a Waypoint:
1. Press ENTER key in Waypoint List page and see a sub-menu
2. Highlight Delete item by pressing UP/ DOWN keys
3. Press ENTER key and see a massage “Delete WPT”
4. Choose Yes and press ENTER key to confirm your deletion; or choose No for
cancellation
Sorting Waypoints:
Sorting waypoint is to list all the waypoints in alphabetic order. Press ENTER
key in Waypoint List page and see a sub-menu. Press UP/ DOWN keys to
highlight Sort item in Waypoint List page, and press ENTER key, then all the
waypoints are relisted.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 14/ 35
Navigate a Waypoints:
If you want to use a waypoint for navigation, you must make it active first.
1. Press ENTER key in Waypoint List page and see a sub-menu(as destination)
2. Highlight Active item by pressing UP/ DOWN keys
3. Press ENTER key to confirm and GPS_DESIGNER begins to guide you to reach
destination
4. Then, “Navigate” change into “Stop”,if press ENTER key, guiding will stop .
DeleteAll:
Remove all waypoints.
1. Press ENTER key in Waypoint List page and see a sub-menu
2. Highlight DeleteAll item by pressing UP/ DOWN keys
3. Press ENTER key and see a massage “Delete all WPT”
4. Choose Yes and press ENTER key to confirm your deletion; or choose No for
cancellation
s
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 15/ 35
Creating a route
1.Press UP / DOWN keys to highlight R_LIST item in MENU page and press ENTER key
2.Coming to Routes List page, Press ENTER key
3Press UP/ DOWN keys to highlight Create item and press ENTER key
4. Press ENTER key again
5.Highlight Add item by UP/ DOWN keys and press ENTER key
6.Coming to the page of Waypoint List, you choose any waypoint you want to set in this route by
UP/
DOWN keys, then press ENTER key
7. Redo from step 4 to step 6 to add multi- waypoint into the route, Press ENTER key and highlight
Save
by pressing UP/DOWN keys.
8. Press ENTER key to finish creating a route.
The R
oute function allows you to link up a series of waypoints and guide to point by point, to a
final destination. If there is a route made up of three waypoints A, B and
C. Then the segments
in travelling order from Waypoint A to Waypoint B, and from Waypoint B to Waypoint C are
called “two legs” on the route.
The route can contain up to 50 waypoints(including start and destination) in GPS_DESIGNER
using any of the waypoint stored in the memory.
In the page of Create a Route, highlight a waypoint by UP/ DOWN keys, and press ENTER
key, pop up
four operational options:
1. Add Waypoint is to put a waypoint behind the highlighted waypoint:
• Press UP/ DOWN keys to highlight Add WPT item
• Press ENTER key and enter Waypoints List page
• Press UP/ DOWN keys to highlight the waypoint you want to add
• Press ENTER key to confirm
2. Insert Waypoint is to put a waypoint in front of the highlighted waypoint
• Press UP/ DOWN keys to highlight Insert WPT item
• Press ENTER key and enter Waypoints List page
• Press UP/ DOWN keys to highlight the waypoint you want to insert
• Press ENTER key to confirm
3. Delete Waypoint is to remove a waypoint in a route
• Press UP/ DOWN keys to highlight the waypoint you want delete
• Press ENTER key, then the waypoint erased from the route
4. Save is to finish route edition and keep it in the unit memory
• Press UP/ DOWN keys to highlight Save item
• Press ENTER key and a mini-window pops up
• Use LEFT/ RIGHT UP/ DOWN keys to name this route
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 16/ 35
NOTE: When you are saving a route in route creation, if there is already a same named route
existed in the memory, the unit will remind you to rename it.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ESCAPE
ENTER
ESCAPE
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 17/ 35
Editing Route
In the page of Route List, you can browse all the routes you saved in GPS_DESIGNER. If you
want to change a route, you can edit it by changing waypoints design:
1. Press UP/ DOWN keys to highlight the route you will change in the page of Route List
2. Press ENTER key and switch into the page of Edit This Route
3. You see all the waypoints along the route now, press ENTER key and pop up a sub-menu
with four commands: Add (WPT), Insert (WPT), Delete (WPT) and Save(route). You can
operate as stated above to change this route specifically.
4. In the end, don’t forget to save your edition. Press UP/ DOWN keys and highlight Save item in
the page of Edit This Route, press ENTER key and check the route name again. If you just want
to keep it, only choose OK; If you want to change the name, just follow the steps in Save Route.
Deleting Route
In the page of Route List, if you want to delete a route:
1. Press UP/ DOWN keys to highlight the route you will delete in the page of Route List
2. Press ENTER key and highlight Delete item in the pop-up sub-menu by UP/ DOWN keys
3. Press ENTER key , and a prompt appears asking for your confirmation
4. Use LEFT/ RIGHT keys to highlight Yes and press ENTER key again, the route is deleted
from the unit; otherwise press No, your deletion becomes invalid
Sorting Routes
1. Press UP/ DOWN keys to highlight any route in the page of Route List
2. Press ENTER key and highlight Sort item in the pop-up sub-menu by UP/ DOWN keys
3. Press ENTER key , and all the routes in the memory are listed in alphabetic order
Navigate Route
If you want to use a route for navigation, you must make it active first.
1. Press UP/ DOWN keys to highlight the route you will use for navigation in the page of Route
List
2. Press ENTER key and highlight Active item in the pop-up sub-menu by UP/ DOWN keys
3. Press ENTER key , then the route is activated ( a wait cursor appears beside the route),
navigation from start to end work ,“Navigate” become to “Stop”. Then, if press ENTER
key on it , guiding will stop .
Return Route
If you want to return along a route for navigation, you can use this function.
1. Press UP/ DOWN keys to highlight any route in the page of Route List
2. Press ENTER key and highlight Return item in the pop-up sub-menu by UP/ DOWN keys
3. Press ENTER key , then navigate from end back to start point ( a wait cursor appears beside
the route), “Return” become to “Stop” . Then ,if press ENTER key on it , guiding will
stop .
Firstly, the five commands have the same functions and operation steps as explained above,
secondly, they are only used for routes in navigation.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 18/ 35
Once a route is activated, in the pop-up sub-menu, the five commands are used for route navigation.
When you are using route navigation, you should switch to Tracking page to see your trace, and switch
to Navigation page to find out your movement status, including LAT,LON, COG,SOG,ALT. In this way,
you are enabled to find your way.
DeleteAll
Remove all Routes.
1. Press ENTER key in Route List page and see a sub-menu
2. Highlight DeleteAll item by pressing UP/ DOWN keys
3. Press ENTER key and see a massage “Delete all routes”
4. Choose Yes and press ENTER key to confirm your deletion; or choose No for cancellation
NOTE:
• You can not edit a route when it is in navigation.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 19/ 35
Recording a Track
1.Press UP/ DOWN key s in MENU page and highlight T-list item, press ENTER key and come into Track
page
2.Press ENTER key and Track Edit window pops up
3.Press UP/ DOWN/ LEFT/ RIGHT keys to change letter and number to give the track a name
4.Press ENTER key to confirm your naming
5.Press ESCAPE key continuously till you return into the main page of Tracking
NOTE: If you input a name which has already existed in track library, you will be informed by
a message “Name Existed”. In this case, you must change your naming. In GPS_DESIGNER,
you can record at most 10 tracks in total, otherwise, a prompt “Memory Full” appears .
6. When you stop your tracking, switch into Track page again and highlight “Stop Record” , then press
ENTER key.
NOTE: You may find your track not a continuous line in the display. That is because the
satellite signal reception is not steady due to some high buildings, subways or magnetic field
and etc.
Once you have some tracks recorded, you can rename and delete them, use one of them for
navigation, and check its record time, distance , speed , area and state.
ENTER
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 20/ 35
Return track
1. Press UP/ DOWN keys in Track page and highlight the track your want to use for
navigation, press ENTER key and come out a sub-menu
2. Press UP/ DOWN keys to highlight Return item in the pop-up window
3. Press ENTER key again and Track Edit window comes out
4. Press UP / DOWN/ LEFT/RIGHT keys change the name of the track
5. Press ENTER key to confirm your input
Navigate track
1. Press UP/ DOWN keys in Track page and highlight the track your want to
rename, and press ENTER key
2. Press UP/ DOWN keys to highlight Navigate item in the pop-up window
3. Press ENTER key again and Track Edit window comes out
4. Press UP / DOWN/ LEFT/RIGHT keys change the name of the track
5. Press ENTER key to confirm your input
Track’s Attribute
1. Press UP/ DOWN keys in Track page and highlight the track your want to check,
and press ENTER key
2. Press UP/ DOWN keys to highlight Attribute item in the pop-up window
3. Press ENTER key and trigger out another page, displaying record time,
distance, status of the track
Deleting a track
1. Press UP/ DOWN keys in Track page and highlight the track your want to
delete,press ENTER key and come out a sub-menu
2. Press UP / DOWN keys to highlight Delete item
3. Press ENTER key and a message comes to ask for your further confirmation
4. Choose Yes and press ENTER key, then the track is completely deleted from
track library
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 21/ 35
ENTER
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 22/ 35
The warning is installed in the course of navigation, flight arrival flights automatically
suggested that the police role, the most installed 10 alarm may flights. Specific operations,
detailed look at the following steps:
1. Immigration destinations need to add the routes to warn column item
2. Outflow destinations removal routes alarm, delete destinations
3. Show flight destinations attributes View
DOWN
ENTER
ERNTER
ENTER
ENTER ENTER
ESCAPE
ENTER
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 23/ 35
Setup
Setup
Highlight Setup item by UP/DOWN key and press ENTER key from Menu page, the Setup page appears. You
can set 7 items for the system: Datum, Display, Time, Alarm, Unit and Other.
Sys
There are four items you can set:mode,record Manner,Battery Type,Restore.
Datum
Refers to the theoretical mathematical model of the earth’s sea surface. Map makers may use a different model
from which to chart their maps, so position coordinates will differ from one datum to another. The datum for the
map you are using can be found in the legend of the map. If you are unsure as to which datum to use, just
choose WGS84.
Unit
There are three unit available for you can set: Show Format,DIS Format,Area Format.
Time
You must choose time format first once you turn on the GPS_DESIGNER, it means you can read time in 12
hours or 24 hours. Then you need to set UTC (Universal Time Coordinate). In another word, if your present
location is in +8 time zone, and you are using +8 time zone clock, you have to choose +8 hours. If you are in +8
time zone but using +6 time zone clock, you’d better choose +6 hours. If you choose 0 hour, that is exactly UTC
Time. This setup is very important, it will directly affect the time displayed. Press LEFT/ RIGHT keys to select 12
hours or 24 hours; Press UP/ DOWN keys to select UTC time.
Alarm
In this item, you can set alarm for five kinds of subjects: XTE, Hazard, Destination, Landmark and Anchor.
Highlight the subject you want to put alarm by UP / DOWN key and press ENTER key.
• For XTE alarm, if you choose 0.2 mile, the alarm will work once your current leg goes out of the circle with 0.2
mile radius and the center of your current location. This function will only be available when the waypoint is
within the route and the unit is set to navigation status.
• For Hazard alarm, If you select 0.2 mile, the unit will alarm automatically when you get into the circle, which is
an area with the center of this Hazard and the radius of 0.2 miles. This function will only be available when the
waypoint is within the route or track and the unit is set to navigation status.
Other
There are two items you can set:Light Time,Contrast.
NOTE:
you must set Hazard in waypoints list; otherwise this alarm does not work.
• For Destination alarm, it is the same as Hazard alarm.
• For Landmark alarm, if you choose ON for Landmark alarm and OFF for Destination alarm, the unit will alarm
once you are within 0.1 unit ( depending on your unit setup) away from each waypoint. If you choose ON for
waypoint alarm and 0.2 mile for Destination alarm, the unit will work within 0.2 mile away from the each
waypoint.
• For Anchor alarm, if you choose 0.2mile, the unit will alarm when you are 0.2 mile away from the location you
set as Anchor .
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 24/ 35
NOTE:
Whenever you start to use Anchor alarm, the unit will always default your current location as the Anchor.
The prompt alarm will last until you go out of the alarm area or switch off the alarm. If you set
Anchor alarm, it will always be effective no matter it is in the state of navigation or not, expect the
alarm is turned off.
Setup
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 25/ 35
Tools options use up/down key selected by determining bond pop Measure
DIS and Measure Area of the two options, Press Enter keys to be able to enter
for further operation. Measure DIS, measurable starting point coordinates to the
coordinates of the end of the distance between points . Measure Area, the
measurement path can be closed area, at the same time can be saved for the track.
At any one page, by ESCAPE key can return to the main menu.
M
easure
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 26/ 35
Find
ENTER
ESCAPE
ESCAPE
ENTER
ENTER
ESCAPE
UP/DOWN
ESCAPE
ENTER
Find options, we can conduct Waypoint, Routes, Track the
search.
If handhelds in the preservation of the relevant data, then you
can search through the complete operation if not preserved relevant
data, it will give a warning to show there is no relevant data.
For example, search Waypoint, you can use the menu up /
down keys selected search options and then Enter key to enter
View pages, you can use up / down button to select waypoint,
routes, track, you can choose waypoint, according to determine
bond after name pop up dialog editor, you can use the up / down /
left / right to change name, followed by the completion of Enter
key editorial said, then began to Enter key search, if there are
flights from the flight so that the properties, depositors will not give
warning.
Route or Track similar to the search.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 27/ 35
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
In the Hunt & Fish options, you can view the best Hunt & Fish with a better
time slot.
Press up / down key to choose measurement and measurement time.
According to determine bond, the use of up / down / left / right to amend
measurement time and measurement, after proper revision, the bond can be
Enter by the return of canceled by the choice of switching bond jumped out.
1. Modification time
2. Measure to amend
H
unt
& F
ish
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 28/ 35
ENTER
ESCAPE
ENTER
ESCAPE
The Sun and provided some options in a certain place on a certain day of sunrise,
sunset, moonrise, moonset, down on the time you travel convenience. The
specific steps are as follows:
Press up / down button to choose measurement and measurement time.
1. Revised measurement time
After Press Enter key, the use of up / down / left / right time to amend the
measure and amended good, you can press Enter return.
2. Revised measure to provide two options, the current positioning and map
location of the measurement to determine the time, the choice of selected key
measurement, by selected after press Enter key, jumped out after the text box by
up / down keys to change the measurement.
Sun & M
oon
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 29/ 35
The tool options, you can use calculator and stopwatch.
T
ools
ENTER
ESCAPE
ENTER
ESCAPE
ENTER
ESCAPE
ESCAPE
ENTER
ENTER
DOWN
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 30/ 35
ommunication
Communication page
Highlight COMMU item by UP/DOWN key and press ENTER key from Menu page, the Setup page
appears. It contains three items:Computer , Master ,Receive. It activates GPS_DESIGNER ‘s
communication capability with a computer or a long-range equipment (for example , modem).
Computer:
With this function , GPS_DESIGNER can establish communication with a computer.
Master:
With this function , GPS_DESIGNER can establish communication with a long-range equipment (for
example , modem) as a master.
Receive:
With this function , GPS_DESIGNER can establish communication with a long-range equipment (for
example , modem)as a receiver.
ENTER
ESCAPE
Error
Correct
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 31/ 35
Altitude: Distance above mean sea level.
BRG: The compass direction from current position to next waypoint
or the destination.
COG: Course over ground. Your direction of movement relative to a
ground position.
Coordinate: A set of numbers that describes your location on or
above the earth.
Course: GPS uses “Course” to define the movement direction of
receiver on the globe surface instead of navigation direction.
Datum: A math model designed to fit part of the earth’s surface.
Latitude and longitude lines on a paper map are referenced to a
specific map datum. The map datum for a GPS receiver needs to match
the datum listed on the corresponding paper map.
Distance: The linear length from current position to named
waypoint or between two waypoints along a route.
DTD: Distance to Destination
DTW: Distance to the next Waypoint
Goto: A single leg route with the present position being the
start of the route and a defined waypoint as the destination. You can
use this function when you want to go directly to one of the waypoints
saved in the memory. Select “Go to”, and then find out the waypoint
you want. Confirm your selection and it starts navigation in this mode.
Latitude: The angular distance north or south of the equator
measured by lines encircling the earth parallel to the equator in degrees
from 0° to 90°.
Leg: A segment of a route that has a staring (From)
waypoint and a destination(To) waypoint. A route may consist of one
or more legs. For example, a route from Waypoint A to Waypoint B, to
Waypoint C and to Waypoint D, has totally three legs from A to B, and
from B to C, and from C to D.
Longitude: The angular distance east or west of the prime meridian
(Greenwich meridian) as measured by lines perpendicular to thee
parallels and converging at the poles from 0° to 180°.
Parallel Channel Receiver: A continuous tracking receiver using
multiple receiver circuits to track satellites simultaneously.
Position: Latitude and longitude, and altitude.
Definitions
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 32/ 35
Definitions
Route: A route consists of start point, end point and in-between waypoints. A single
route is a kind of simple route only having start point and end point, in
another word it is a “Goto” route. Route can also be made up of several legs
from one waypoint reaching up to 20 other different waypoints.
SOG: Speed over ground. The actual speed the GPS_DESIGNER is moving over
the ground. This may differ from airspeed or nautical speed due to such
things as sea conditions or head winds.
Speed: The GPS receiver uses instantaneous speed to indicate practical moving
speed.
TRP: Tracked route.
True North: The direction of the North Pole from your current position. Magnetic
compasses are slightly incorrect due to effects of the Earth’s magnetic field
while GPS units are more accurate for magnetic influences.
Waypoint: A permanently stored and named position in the GPS_DESIGNER’s
memory.
XTE: Cross-Track Error.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 33/ 35
roubleshooting
1. The screen is blank after you press the POWER keypad.
• Wrong batteries installation or no enough power. Check to insure that the batteries are installed
correctly and that the battery terminals are clean. Or replace the batteries.
• You may did not make valid operations(press is too light to start GPS_DESIGNER). Please
press POWER key again till the unit responses and hear a sound “B” and see the welcome
page.
• If you hear a sound “B”, then the GPS_DESIGNER is already turned on. You need to adjust
screen contrast until you can recognize the words on the screen.
Please take a reference in page 3 on “ Turning the GPS_DESIGNER on”.
2. Battery choices
You can use alkaline battery or rechargeable battery in GPS_DESIGNER. But if you use rechargeable
battery, the GPS_DESIGNER can not show you the correct information on the batteries condition.
3. Unavailability of satellite signals for long time
• Make sure you are operating the GPS_DESIGNER outdoors, not in a house or a covered
building.
• Ensure the sky is clear and open since it will influence the satellite signals reception.
• Check your surroundings, there may be some electric or magnetic field around you or the
GPS_DESIGNER which can interfere the normal work of GPS_DESIGNER, such as wireless
radio station, radio tower or high-voltage wires and cables, and etc.
4. The GPS_DESIGNER has water outside and inside
Wipe down the water outside of the GPS_DESIGNER with clean clothing. Put it in a windy place
without direct sunshine and dry the inside. Then try to turn it on again to see if it works well. If it is still
not good, please contact local maintenance agency. Never try to open the GPS_DESIGNER by yourself.
5. Though in open area with clear sky, the GPS_DESIGNER can not track satellite.
• It’s most because the GPS_DESIGNER had worked indoor for long time and been brought
outdoor directly. Please turn off the GPS_DESIGNER outdoor and restart it.
• The GPS_DESIGNER is damaged. Please contact local dealer or supplier.
6. The GPS_DESIGNER dropped or collided
Check the appearance completeness of the GPS_DESIGNER. Contact the local maintenance agency if
you find the GPS_DESIGNER does not work well.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 34/ 35
pecifications
• Navigation Features
Waypoints:
Total: 1000 with name and symbol
Routes: 30 Reversible routes
Tracks: 10 tracks with name and symbol
· Performance
Receiver: Twelve parallel channel receiver continuously tracks and uses up to
twelve Satellites
Frequency: L1,1575.42MHz,C/A code
Sensitivity: -140 dbm
Acquisition Times:
Hot : Approximately 10 seconds
Warm: Approximately 40 seconds
Cold: Approximately 60 seconds
Re-acquisition: Approximately less than 1 second
Update Rate: 2-seconds,continuous
Accuracy:
Position: 25 meters 2DRMS
Velocity: 0.1 knot RMS steady state
Dynamics: 2g’s
Max.Height: 18000 meters
Max.Velocity: 100 m/s
Antenna: Built-in porcelain antenna
· Physical
Size: 120x54x30mm
Weight: 170g with 2 AA batteries
Display: 105x160 pixel, high-contrast LCD, electro-luminescent backlighting
Memory: Internal lithium battery backup lasts up to 10 years
• Power
Source: 2 AA batteries(or rechargeable batteries), 1.5V(1200mAH) each
Battery Life: Up to 16 hours
• Temperature Operation: -20~70°C
Storage: -30~80°C
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 35/ 35
mbols & Prompts
Symbols
In the GPS_DESIGNER, you can use 28 symbols to name your waypoints
( see them in the right part of the page).
Prompts
• Maximum 30 routes can be saved!
The GPS_DESIGNER can memorize maximum 30 routes, 10
tracks and 1000 waypoints. If you want to save more, you must
delete some and spare space in the unit.
• Deletion is invalid!
When a waypoint or a track or a route is in navigation, you can
not delete them.
• No route can be used!
There is no route in the memory at all.
• Fail to delete waypoint, it is used by Goto!
When a waypoint is used in Goto navigation, you can not delete
or edit it.
• Fail to edit waypoint, it is in use!
The same as above.
• Waypoint is wrong, it can not be saved!
For a valid waypoint, its longitude covers from 0º to180º, and
latitude from 0º to90º. Any waypoint defined out of this range is
wrong or invalid.
• Low Battery! It will shutdown automatically later.
When the batteries are too weak to support operation, the unit will
pop up this prompt.
• In dangerous zone!
Once you get into the area you set up as dangerous place, the
GPS_DESIGNER will alarm you as soon as possible.
• The track is unable to navigate.
For GPS receiver, it can not identify position change within 25 meter range.
telephone kiosk
crossroad
fish pond
slope
flood
lake
fork in a road
landslid
broken roadway
expanded roadway
camp-out
restaurant
human
way-point
airport
riverhead
bridge
station
service
station
leakage
danger zone
tree
forbidden area
hospital
dock
rockfall
house
incursion-
borderline
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 36/ 35
Datum Index
Adindan-Mean Adindan-Regional Mean
Ala,Can,Conus North American 1983-Alaska,Canada,Conus
Alaska North American 1927-Alaska
Aleutian IsdE North American 1927-Alaska(Aleutian Islands E)
Aleutian IsdW North American 1927-Alaska(Aleutian Islands W)
Aleutian Isds North American 1983-Aleutian Islands
Antarctica Camp Area Astro-Antarctica
Arc-Mean Arc 1950-Regional Mean
Argentina South American 1969-Argentina
Argentina Campo Inchauspe-Argentina
Australian 66 Australian Geodetic 1966
Australian 84 Australian Geodetic 1984
Bahama,Florid Cape Canaveral-Bahamas,Florida
Bolivia 56 Provisional S.American 1956-Bolivia
Bolivia 69 South American 1969-Bolivia
Brazil Corrego Alegre-Brazil
Brazil 69 South American 1969-Brazil
Brune,E.Malay Timbalai 1948-Brunei,East Malaysia
C.America North American 1927-Central America
C.Amer,Mexico North American 1983-Central America,Mexico
C.Canada North American 1927-Central Canada
Canada Mean North American 1927-Mean for Canada
Canada yukon North American 1927-Canada(Yukon)
Chile 63 Provisional S. Chilean 1963-Chile
Chile 69 South American 1969-Chile
Colombia 56 Provisional S.American 1956-Colombia
Colombia 69 South American 1969-Colombia
Conus Mean North American 1927-Mean for Conus
Cuba North American 1927-Cuba
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 37/ 35
Datum Index
Czechoslova42 S-42(Pulkovo 1942)-Czechoslovakia
Czechoslova93 S-JTSK-Czechoslovakia(prior to Jan 1993)
E.Canada North American 1927-East Canada
E.Mississippi North American 1927-East of Mississippi
Egypt 07 Old Egyptian 1907-Egypt
Egypt 50 European 1950-Egypt
England Ord. Survey G. Britain 1936-England
Eur.C.Reg.M European 1979-Central Regional Mean
Eur.E Reg.M European 1950-Eastern Regional Mean
Eur.N.Reg.M European 1950-Northern Regional Mean
Eur.S.Reg.M European 1950-Southern Regional Mean
Eur.W.Reg.M European 1950-Western Regional Mean
Finland Norwy European 1950-Finland,Norway
G.Britain M Ord. Survey G. Britain 1936-Regional Mean
Greece European 1950-Greece
Greenland North American 1927-Greenland
Guam Guam1963-Guam
Guyana South American 1969-Guyana
Hawaii Old Hawaiin-Hawaii
Hawaii 83 North American 1983-Hawaii
Hawaii Mean Old Hawaiin-Regional Mean
Hong Kong Hong Kong 1963-Hong Kong
Hungary S-42(Pulkovo 1942)-Hungary
Iceland Hjorsey 1955-Iceland
Indian 60 Indian 1960
India,Nepal Indian-India,Nepal
Indonesia Gunung Segara-Indonesia
Isle of Man Ord. Survey G. Britain 1936- Isle of Man
Italy Sicily European 1950-Italy(Sicily)
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 38/ 35
Datum Index
Japan Tokyo-Japan
Kauai Old Hawaiin-Kauai
Kazakhstan S-42(Pulkovo 1942)-Kazakhstan
Latvia S-42(Pulkovo 1942)-Latvia
Maderia Isds Porto Santo 1936-Maderia Islands
Malta European 1950-Malta
Marshall Wake-Eniwetok 1960-Marshall Islands
Maui Old Hawaiin-Maui
Mexico Gulf North American 1927-Gulf of Mexico
Mexico North American 1927-Mexico
Midway Isds Midway Astro 1961-Midway Islands
Mindanao Luzon-Philippines(Mindanao)
Montserra Isd Montserrat Island Astro 1958
Morocco Merchich-Morocco
N.Chile Provisional S.American 1956-Chile(Northern)
New Zealand49 Geodetic Datum 1949-New Zealand
New Georg Isd DOS 1968-New Georgia Islands
New Zealand71 Chatham Island Astro 1971-New Zealand
Nw.Canada North American 1927-Northwest Canada
Oahu Old Hawaiin-Oahu
Okinawa Tokyo-Okinawa
Oman Oman-Oman
Pakistan Indian-Pakistan
Philippines Luzon-Philippines
Paraguay South American 1969-Paraguay
Peru 56 Provisional S.American 1956-Peru
Peru 69 South American 1969-Peru
Porland S-42(Pulkovo 1942)-Poland
Romania S-42(Pulkovo 1942)-Romania
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 39/ 35
Datum Index
Russia Pulkovo 1942-Russia
S.Africa Cap-South Africa
S.America M56 Provisional S.American 1956-Regional Mean
S.America M69 South American 1969-Regional Mean
S.Chile Provisional S.American 1956-Chile(Southern)
S.Georgia Isd ISTS 061 Astro 1968-South Georgia Islands
S.Greenland Qornoq-Greenland(South)
S.Korea K Korean Geodetic System-South Korea
Salvage Isds Sevagem Grande-Salvage Islands
Sardinia 40 Rome 1940-Italy(Sardinia)
Sardinia 50 European 1950-Italy(Sardinia)
Saudi Arabia Nahrwan-Saudi Arabia
Scotld,Shetld Ord. Survey G. Britain 1936-Scotland,Shetland
South Korea T Tokyo-South Korea
Soviet Sys.85 SGS 85-Soviet Geodetic system 1985
Taiwan Hu-Tsu-Shan-Taiwan
Thai,Vietnam Indian 1954-Thailand,Vietnam
Thailand 75 Indian 1975-Thailand
Toky-Mean Tokyo-Regional Mean
United Arab Nahrwan-United Arab Emirates
Uruguay Yacare-Uruguay
Venezuela Provisional S. American 1956-Venezuela
W. Canada North American 1927-West Canada
W.Malay&Singa Kertau 1948-West Malaysia & Singapore
W.Mississippi North American 1927-West of Mississippi
Wales Ord. Survey G. Britain 1936-Wales
WGS 72 WGS 1972-Global Definition
WGS 84 WGS 1984-Global DefinitionBolivia 56
PDF created with pdfFactory Pro trial version www.pdffactory.com
Loading...