GPI Sports & Fitness TREADMILL 201 - Journey Owner's Manual

TREADMILL 201 - Journey
OWNER'S MANUAL
INDEX
1. OVERVIEW DRAWING.......................................................................................3
2. IMPORTANT SAFETY INSTRUCTION..............................................................4
3. GROUNDING INSTRUCTION ............................................................................5
5. ASSEMBLY STEPS...............................................................................................7
6. MAINTENANCE……………………………………………………….9
7. COMPUTER OPERATION INSTRUCTION………………………………………………………10
1. OVERVIEW DRAWING:
Computer
Safety Key/Clip
POWER CORD
Power Switch
Circuit Breaker
Frame
2. IMPORTANT SAFETY INSTRUCTION
When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using the treadmill.
DANGER – To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
2. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before
putting on or taking off parts.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachment not recommended
by the manufacture.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handl e.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. To disconnect, turn all controls to the off position, than remove plug from outlet.
13. Connect this appliance to a properly grounded outlet only.
14. This machine is intended for household use only.
15. If the power cord is damaged, be sure to ask the manufactory for replacement to avoid the accidents. The selling
agents and correlative qualified professionals are as well as eligible.
3. GROUNDING INSTRUCTION
This product must be grounded. If it should b e malfunction or breakdown, grou nding prov ides a path of least r esistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the produ ct is product is properly ground ed. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 220V~240V circuit and has a grounding plug that looks like the plug illustrated in the figure. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
Figure
Grounding methods
GROUNDED OUTLET
GROUNDED PIN
4. PRE-ASSEMBLY CHECK LIST
A
a
b
c
d
e
B
C
D
ITEM Description Qty ITEM Description Qty
A
Computer Console
1 a Allen Bolt M8xP1.25x40 6
B
Frame
1 b Allen Bolt M8xP1.25x15 2
C
Bottle
1 c
Allen Wrench + Screwdriver
5mm(70mmx70mm)
1
D Towel 1 d SILICON 1
e Safety Key 1
Loading...
+ 12 hidden pages