GPI - Great Plains Industries FLOMEC TM Series Water Meters Data Sheet
PRODUCT CONFIGURATION
TM050 THRU TM200
TM300 & TM400
TM SERIES (WATER METERS)
FLOMEC® TM Series Water Meters are accurate, economical and
designed to last. Choose TM Water Meters for water processing and
irrigation applications:
• Meets Schedule 80 PVC specications
• Standard low-prole display
• Seven sizes with three tting types available
• Flowrates from 1 to 600 gallons per minute (3.8 to 2271 L/min)
FEATURES / BENEFITS
• Easy to install
• Displays in gallons, litres and cubic feet
• Indicates Batch, Cumulative Totals and Rate of Flow
• Available in NPT, BSPP, Spigot and Flange (3” & 4” only) Fittings
• Non-volatile totals means amounts are retained when batteries
are replaced or power is lost
• Lithium battery life: 5 years
PRODUCT IDENTIFIER
1
TM = Water Meter, Schedule 80 PVC
TURBINE SIZE
2
050 = ½” (15 mm)
075 = ¾” (20 mm)
100 = 1” (25 mm)
150 = 1-½” (40 mm)
200 = 2” (50 mm)
300 = 3” (80 mm)
400 = 4” (100 mm)
FITTING TYPE
3
Blank = Spigot (Pipe) End
-N = NPT Female
-B = BSPP Female (1”, 1-1/2”, 2”, 3” & 4” meters only)
-F = 150# ANSI Flange (3” and 4” meters only)
ELECTRONIC CHOICE
Blank = Local Display (Standard)
4
-P = Pulse Output
1 2 3 4
--->>>> TM 300 -N -P
DIMENSIONS
TM050
TM050-N
TM075
TM075-N
TM100
Meter
Size
Length Height Width
3.8”
(96 mm)
5.8”
(147 mm)
3.8”
(96 mm)
5.8”
(147 mm)
4.1”
(104 mm)
2.6”
(66 mm)
2.6”
(66 mm)
2.7”
(68 mm)
2.7”
(68 mm)
3.1”
(79 mm)
(51 mm)
(51 mm)
(51 mm)
(51 mm)
(51 mm)
W I D T
2.0”
2.0”
2.0”
2.0”
2.0”
H
Meter
Size
TM100-N
TM150
TM150-N
TM200
TM200-N
L E N
G
T
H
Length Height Width
(155 mm)
(137 mm)
(188 mm)
(140 mm)
(190 mm)
H T
H E I G
6.1”
5.4”
7.4”
5.5”
7.5”
3.1”
(79 mm)
3.7”
(94 mm)
3.7”
(94 mm)
4.2”
(107 mm)
4.2”
(107 mm)
W I D T H
2.0”
(51 mm)
2.1”
(53 mm)
2.1”
(53 mm)
2.4”
(61 mm)
2.4”
(61 mm)
L E
N
G T H
Meter
Size
TM300
(SPIGOT)
TM400
(SPIGOT)
TM300-N
(NPT)
TM400-N
(NPT)
TM300-F
(FLANGE)
TM400-F
(FLANGE)
H E I G H T
Length Height Width
11.5”
(292 mm)
13.5”
(343 mm)
14.7”
(373 mm)
17.0”
(432 mm)
12.0”
(305 mm)
14.0”
(356 mm)
*Length guidelines are estimates;
actual length can vary up to ± 1/2”
(13 mm)
**Computer display adds 1.1 in. (28
mm) to height
5.34”
(136 mm)
6.34”
(161 mm)
5.78”
(147 mm)
6.76”
(172 mm)
7.5”
(190 mm)
9.0”
(229 mm)
3.5”
(89 mm)
4.5”
(114 mm)
4.37”
(111 mm)
5.34”
(136 mm)
7.5”
(190 mm)
9.0”
(229 mm)
© 2017 Great Plains Industries, Inc. All Rights Reserved.
SPECIFICATIONS
Fitting Type: Schedule 80 Spigot (Pipe) End
NPT (Female)
BSPP (Female)
(1 inch, 1-1/2 inch, & 2 inch meters only)
150# ANSI Flange or DIN 100 Flange
(3” and 4” meters only)
Meter Sizes Available: 1/2” 3/4” 1” 1-1/2” 2” 3” 4”
Flow Range: 1/2" (050) 1 - 10 GPM (3.8 - 38 L/min)
3/4" (070) 2 - 20 GPM (7.6 - 76 L/min)
1" (100) 5 - 50 GPM (19 - 190 L/min)
1-1/2" (150) 10 - 100 GPM (38 - 380 L/min)
2" (200) 20 - 200 GPM (76 - 760 L/min)
3” (300) 40 - 400 GPM (151 - 1514 L/min)
4” (400) 60 - 600 GPM (227 - 2271 L/min)
Accuracy (% of Reading): ± 3.0%
Pressure Rating (1/2” - 2”): 225 psi (15.3 bar) @ 73° F (23° C)
BSP 150 psi (10.3 bar) @ 73° F (23° C)
Pressure Rating (3” - 4”): 225 psi (15.3 bar) @ 73° F (23° C)
DIN 135 psi (9.1 bar) @ 73° F (23° C)
For CE Applications 135 psi (9.1 bar) @ 73° F (23° C)
Operating Temperature Range:
+32° F to +140° F (0° C to +60° C)**
ACCESSORIES / ELECTRONICS
Part No. Description
113275-1
125260-01 90 Display Adapter Kit
FM Approved Remote Kit Assembly
(will not make meter FM Approved)
Typical
K-Factor:
Wetted
Materials
(1/2” - 2”):
Wetted
Materials
(3” - 4”):
Calibration
Report:
*At the end of Extended Flow Range accuracy may decrease. Damage to
the meter may occur if running at high Extended Range.
**PVC pressure rating will incrementally decrease above 73 F (23 C).
1/2" (050) 2,500 PPG (660 Pulses/L)
3/4" (070) 1,100 PPG (291 Pulses/L)
1" (100) 565 PPG (149 Pulses/L)
1-1/2" (150) 215 PPG (57 Pulses/L)
2" (200) 100 PPG (26 Pulses/L)
3” (300) 43 PPG (11 Pulses/L)
4” (400) 17 PPG (4.5 Pulses/L)
Housing: PVC
Bearings: Ceramic
Shaft: T
Rotor: PVDF
Rings: 316 Stainless Steel
Housing: PVC
Bearings: PEEK
Shaft & Thrust
ashers:
W
Rotor & Nose
Cone:
Signal
Generator:
Comes standar
N.I.S.T. – Certication available
ungsten Carbide
Stainless Steel
Acetal
Ferrite
d with P (Pulse out) TM models
APPLICATIONS
125080-1
145507-01 Kit, Adapter, TM-QSI1-Q09 Display
145507-02 Kit, Adapter, TM-QSI2-Q09 Display
145507-03 Kit, Adapter, TM-QSI3-Q09 Display
145507-04 Kit, Adapter, TM-QSI1-No Display
145507-05 Kit, Adapter, TM-QSI2-No Display
145507-06 Kit, Adapter, TM-QSI3-No Display
145507-07 Kit, Adapter, TM-QSI1-Display Ready
145507-08 Kit, Adapter, TM-QSI2-Display Ready
145507-09 Kit, Adapter, TM-QSI3-No Display
Pulse Access Dust Cover (must be used in conjunction
with FM Appr
oved Remote Kit Assembly)
• OEM water treatment equipment / skids
• Sub-metering of facility
water usage
• Waste water treatment
equipment
•
Water based cooling
systems
• Chemical feed
systems
• Monitoring clean
uids
• Irrigation • Cooling towers
• Batching • Blending
• Plant process water
APPROVALS
05/15 IND-1043-TM
10/17
Loading...