GPI TM Data sheet
PRODUCT CONFIGURATION
W I D T H
L E
N
G T H
H E I G H T
TM050 THRU TM200
TM300 & TM400
TM SERIES (WATER METERS)
WITH DISPLAY AND PULSE OUTPUT
FLOMEC® TM Series Water Meters are accurate, economical and designed to last. Choose TM Water Meters
for water processing and irrigation applications:
• Meets Schedule 80 PVC specications
• Standard low-prole display
• Five sizes with two tting types available
• Flowrates from 1 to 200 gallons per minute
FEATURES / BENEFITS
• Includes pulse output cable for interfacing with
customer equipment.
• Displays in gallons and litres.
PRODUCT IDENTIFIER
1
TM = Water Meter, Schedule 80 PVC
TURBINE SIZE
2
050 = ½ inch, 075 = ¾ inch, 100 = 1 inch,
150 = 1-½ inch, 200 = 2 inch
FITTING TYPE
3
-LP = Spigot (Pipe) End
-N-LP = NPT Female
1 2 3
--->>>> TM + 150 + -N-LP = SAMPLE
DIMENSIONS
Meter
Size
TM050-LP 4.3 (109) 2.5 (64) 2.1 (53)
TM050-N-LP 6.0 (152) 2.7 (68) 2.1 (53)
TM075-LP 4.4 (112) 2.7 (68) 2.1 (53)
TM075-N-LP 6.1 (155) 2.9 (74) 2.1 (53)
TM100-LP 4.5 (114) 2.9 (74) 2.1 (53)
TM100-N-LP 6.5 (165) 3.1 (79) 2.1 (53)
TM150-LP 5.4 (137) 3.6 (91) 2.1 (53)
TM150-N-LP 7.6 (193) 3.8 (97) 2.3 (58)
TM200-LP 5.5 (140) 4.1 (104) 2.4 (61)
TM200-N-LP 7.9 (201) 4.4 (112) 3.5 (89)
Length
“ (mm)
Height
“ (mm)
Width
“ (mm)
• Indicates Batch, Cumulative Totals and Rate of
Flow.
• Non-volatile totals means amounts are retained
when batteries are replaced or power is lost.
• Lithium battery life: 5 years
• OEM water treatment equip-
• Sub-metering of facility
• Waste water treatment
• Irrigation • Cooling towers
• Batching • Blending
• Plant process water
APPLICATIONS
ment / skids
water usage
equipment
• Water based cooling
systems
• Chemical feed
systems
• Monitoring clean
uids
H
W I D T
*Length guidelines are estimates; actual length can vary up to ± 1/2”.
L E N
G
T
H
H T
H E I G
© 2015 Great Plains Industries, Inc. All Rights Reserved.
SPECIFICATIONS
Fitting
Type:
Meter Sizes Available: 1/2” 3/4” 1” 1-1/2” 2”
Flow
Range:
Accuracy (% of Reading): ± 3.0%
Pressure Rating: 225 PSI @ 73° F (23° C)
Operating Temperature Range: +32° F to +140° F
Schedule 80 Spigot (Pipe) End
NPT (Female)
1/2" (050) 1 - 10 GPM
3/4" (070) 2 - 20 GPM
1" (100) 5 - 50 GPM
1-1/2" (150) 10 - 100 GPM
2" (200) 20 - 200 GPM
ACCESSORIES / ELECTRONICS
Typical
K-Factor:
(Pulses per
gallon)
Wetted
Materials:
Calibration
Report:
1/2" (050) 2,500 PPG
3/4" (070) 1,100 PPG
1" (100) 565 PPG
1-1/2" (150) 215 PPG
2" (200) 100 PPG
Housing: PVC
Bearings: Ceramic
Shaft: Tungsten Carbide
Rotor: PVDF
Rings: 316 Stainless Steel
Comes standard.
N.I.S.T. – Certication available.
Part No. Description
113520-1 Battery Replacement Kit
116000-1 Calibration Container, Large (5 gallon)
125508-03 ½ inch, Turbine Assy Kit
125508-04 ½ inch NPT, PVC Turbine Assy Kit
125510-03 ¾ inch, Turbine Assy Kit
125510-04 ¾ inch NPT, PVC Turbine Assy Kit
125512-03 1 inch, Turbine Assy Kit
125512-04 1 inch NPT, PVC Turbine Assy Kit
125514-03 1 ½ inch, Turbine Assy Kit
125514-04 1 ½ inch NPT, PVC Turbine Assy Kit
125516-03 2 inch, Turbine Assy Kit
125516-04 2 inch NPT, PVC Turbine Assy Kit
901002-52 Seal
Part No. Description
Computer Kits:
125509-04 ½ inch, Computer Assy Kit w/Pulse
125511-04 ¾ inch, Computer Assy Kit w/Pulse
125513-04 1 inch, Computer Assy Kit w/Pulse
125515-04 1 ½ inch, Computer Assy Kit w/Pulse
125517-04 2 inch, Computer Assy Kit w/Pulse
113275-1
125206-01
FM Approved Remote Kit Assembly
(will not make meter FM Approved)
90° Display Adapter Kit
APPROVALS
10/15 IND-1043-TM w/Pulse Out
Service & Warranty: For technical assistance, warranty replacement or repair contact your
FLOMEC™ or GPI® distributor: In North or South America: 888-996-3837 / GPI.net
Outside North or South America: +61 2 9540 4433 / omec.com.au
Loading...