GPI GSCPS Data sheet
Precision Meters - Sanitary Clamp
Model GSCPS
Standard Sanitary Clamp
MODEL GSCPS – SPECIFICATIONS
Design Type: Turbine
Housing Material:
Meter Sizes A
Meter ID:
1-1/2” 1-1/2” Fitting
2”
Flow Range: 1” (100) 6.7 - 67 GPM (25.2 - 252 LPM)
1-1/2” (150) 17.7 - 177 GPM (67.0 - 670 LPM)
2” (200) 33 - 330 GPM (125.0 - 1250 LPM)
Accuracy (Linearity):
Repeatability:
Pressure Rating:
Operating T
For GSCPS:
SIP (up to 1 hour):
Typical K-Factor: 1” (100)
1-1/2” (150)
2” (200)
Wetted Materials (SIP):
Housing:
Sleeve Bearings:
Thrust Bearing:
Shaft:
Rotor:
Rotor Supports:
Recommended Strainer Size:
1”
1-1/2”
2”
Frequency Output:
1-1/2” (150)
2” (200)
vailable (ID):
1”
2” Fitting
emperature Range:
+285°F (+140°C)
1” (100)
316 Stainless Steel
1” 1-1/2” 2”
1-1/2” Fitting
± 0.5%
± 0.1%
Limited by fitting size, clamp size & temp.
-100°F to +225°F (-74°C to +107°C)
896
340
181
316 Stainless Steel
PEEK
PEEK
316 Stainless Steel
CD4MCu Stainless Steel
316 Stainless Steel
40 mesh
18 mesh
14 mesh
100 - 1000 Hz
100 - 1000 Hz
100 - 1000 Hz
APPROVALS
Low Profile Sanitary Clamp
Precision Turbine Meter
1-1/2 inch Meter with 1-1/2 inch Fitting
ML-1800-6 06/08
Model GSCPS
A C C U R AC Y: ± 0. 5 %
GSCPS Stainless Steel
Select Your Meter Size:
1 inch Meter with 1-1/2 inch Fitting
2 inch Meter with 2 inch Fitting
GSCPS & “L” Option Meters carry a
Sanitary Rating.
Flowmeters for milk and milk products, Number 28-03.
CIP SIP
This meter meets the strict 3-A Sanitary Standards using the
new “Third Party Verification” (TPV) program. Our methods
of design, construction and traceability of components have
been reviewed and approved.
The internals of this meter are machined or polished to meet
3-A self-draining and cleaning requirements (Ra 32). The
GSCPS Meter meets Clean in Place (CIP), Steam in Place
(SIP) and Clean Out of Place (COP) requirements.
buy smart.buy value.buy
7
Loading...