GPI GM Data sheet

GM Series Oval Gear Meters are designed

for low flow and high accuracy. GM Series

Meters are great for viscous fluids. Units

are available with pulse output from either

a Reed Switch or Hall Effect Sensor.

Electronics choices for the GM Series

Meters are covered in Section 6.

GM Series
Oval Gear
Meters

GM Series
Oval Gear
Meters

section 3: gm series - oval gear meters

ML-1800-5 Rev. B 03/07

29

Build-Your-Own GM Oval Gear Meter

1) Select Your GM Meter

GM Meters come in a variety of sizes and materials.

Pulse Meter Mechanical Meter

2) Select Your Sensor

GA500

4-20 mA Output

Without Display (Remote)

Reed Switch

(Standard)

Requires Dedicated Power Source

Hall Effect

3) Select Your Electronics Choice

For further details and selections see Electronics Section on page 58.

GG510

Local Display

With Pulse Output

GX500

Display 4-20 mA Output

(Remote)

Pulse Output

30

4) Need a Strainer?

Oval Gear Meters work best with clean fluid, free of debris.

GPI carries Y Strainers to fit all models of Oval Gear Meters. These strainers range from 1/4 in. to 2 in. models.

All sizes come complete with blow-off and plug. See page 73 for strainer specifications.

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM Series Meter Number Reference

Product Identifier

GM001 = Pulse Meter - 1/8 inch
GM002 = Pulse Meter - 1/4 inch
GM003 = Pulse Meter - 1/4 inch
GM005 = Pulse Meter - 1/2 inch
GM505 = Mechanical Meter - 1/2 inch
GM006 = Pulse Meter - 3/4 inch
GM007 = Pulse Meter - 1 inch
GM010 = Pulse Meter - 1 inch
GM510 = Mechanical Meter - 1 inch
GM015 = Pulse Meter - 1-1/2 inch
GM515 = Mechanical Meter - 1-1/2 inch
GM020 = Pulse Meter - 2 inch
GM520 = Mechanical Meter - 2 inch

Body Material

A = Aluminum (All models except GM007)
B = Bronze (Models GM010, GM015 & GM510)
C = PPS w/Hastalloy C Shafts (Model GM007 only)
H = High Pressure Stainless Steel (Models GM002 & GM003)
I = Intermediate Pressure Stainless Steel (Models GM001, GM002 & GM003)
R = PPS (Models GM002, GM003 & GM007)
S = Stainless Steel (All models except GM006 & GM007)

GM Series dimensions
listed on page 70.

Fitting Type

1 = BSP (Female) Litre

2 = NPT (Female) Gallon

3 = NPT (Female) Litre (Models GM505, GM510, GM515 & GM520)
4 = 150# ANSI Flange Gallon (Models GM010, GM015, GM020, GM510, GM515, GM520 Aluminum & S.S. only)

5 = 150# ANSI Flange Litre (Models GM510, GM515, GM520 Aluminum & S.S. only)

6 = Tri-Clover® Fitting Gallon (Models GM010, GM015 S.S. only)

Sensor

H = Hall Effect (Models GM001, GM002, GM003, GM005, GM006, GM007, GM010, GM015 & GM020)
M = Mechanical Display (Models GM505, GM510, GM515 & GM520 only)
R = Reed Switch (Models GM001, GM002, GM003, GM005, GM006, GM007, GM010, GM015 & GM020)

Rotor Materials

2 = PPS (Models GM002*, GM003*, GM005, GM006, GM007*, GM010, GM015, GM020, GM505, GM510,

GM515 & GM520)

3 = High Viscosity PPS (Models GM005, GM010, GM015, GM020, GM505, GM510, GM515 & GM520)
4 = Stainless Steel (Models GM001, GM002, GM003, GM005, GM010, GM015, GM020, GM510, GM515

& GM520)

5 = High Viscosity S.S. (Models GM003, GM005, GM010, GM015, GM020, GM510, GM515 & GM520)

O-Ring

1 = Fluorocarbon
2 = PTFE

Electronics Choice

1 = Pulse Out - Aluminum (Models GM001, GM002, GM003, GM005, GM010,

GM015 & GM020)

2 = Pulse Out - S.S. (Models GM001, GM002, GM003, GM005, GM010, GM015

& GM020)

3 = Pulse Out - Bronze (Models GM010 & GM015)
4 = Pulse Out - PPS (Models GM002, GM003 & GM007)
5 = GG500 - Standard Display (Models GM001, GM002, GM003, GM005,

GM006, GM007, GM010, GM015 & GM020)

6 = GX500 - 4-20 mA Transmitter with Display (Models GM001, GM002,

GM003, GM005, GM006, GM007, GM010, GM015 & GM020)

7 = GA500 - 4-20 mA Transmitter (Models GM001, GM002, GM003, GM005,

GM006, GM007, GM010, GM015 & GM020)

9 = Mechanical (Models GM505, GM510, GM515 & GM520)

section 3: gm series - oval gear meters

➤

GM001 A 2 R 4 1 1

ML-1800-5 Rev. B 03/07

➤

+ + + + + +

➤

➤

➤

➤

➤

➤

(Sample Model Number)

buy smart.buy value.buy

* Requires PPS body material.

31

GM001 - 1/8” Oval Gear Pulse Meter

Shown here with
Local Display

The GM001 is one of three compact meters
in the Oval Gear Meter line. This meter is
small and accurate. Choose from either
Aluminum or 316 Stainless Steel body
materials, both with stainless steel rotors.
The GM001 can handle a wide range of
fluid viscosities.

A c c u rA c y : ± 1 . 0 % of r e A di n g

Select Your Body Material:

Aluminum

Stainless Steel

Intermediate Pressure Stainless Steel

Features and Benefits:

Up to 1,000 cps viscosity.

¸

Compact, durable and serviceable on-site.

¸

Extremely accurate even with viscous fluids.

GM001 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Material:

O-Ring:

(Optional)

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

Pressure Rating:
Aluminum:
Stainless Steel:
Intermed. Pressure SS:

Maximum Temperature:
Aluminum:
Stainless Steel:
Intermed. Pressure SS:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:
Intermed. Pressure SS:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:
Stainless Steel:
Intermed. Pressure SS:

Remote Display:

Remote Transmitter:

Reed Switch or Hall Effect Sensor*

316 Stainless Steel

Fluorocarbon (Std.), Perfluoroelastomer

Pulse Out or Local 4-20 mA Transmitter

Local Display

0.13 - 13.2 GPH (0.5 - 50 LPH)

0.528 - 13.2 GPH (2 - 50 LPH)

± 1.0% of reading

± 0.03%

1,000 cps

75 PSI / 5 BAR
150 PSI / 10 BAR
800 PSI / 55 BAR

176°F / 80°C
248°F / 120°C
248°F / 120°C

5855.4 PPG / 1547 PPL

Aluminum with PPS Cap
316 Stainless Steel
316 Stainless Steel

Sapphire

316 Stainless Steel

0.2 - 21.5 Hz @ 0.13 - 13.2 GPH

200 mesh

1.0 lbs. (0.45 kg)

2.0 lbs. (0.91 kg)

2.0 lbs. (0.91 kg)

Option Available: Model GG500

Options Available: Models GA500 & GX500

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Handles particles sizes to 0.005”/0.127 mm.

¸

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

32

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM002 - 1/4” Oval Gear Pulse Meter

The GM002 is one of the small capacity
meters in the GM Series line and is
differentiated by its flowrate capabilities.
It has the ability to handle a wide range of
fluid viscosities with exceptional levels of
repeatability and durability.

A c c u rA c y : ± 1 . 0 % of r e A di n g

Select Your Body Material:

Aluminum

PPS

Stainless Steel

High Pressure Stainless Steel

Intermediate Pressure Stainless Steel

Features and Benefits:

Up to 1,000 cps viscosity.

¸

Compact size and extremely accurate even

¸

with viscous fluids.

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Handles particles sizes to 0.005”/0.127 mm.

¸

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Durable and serviceable on-site.

¸

Certificate of Accuracy supplied with meter.

¸

GM002 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Material:

O-Ring:

(Optional)

Output Options:
Aluminum: Pulse Out or Local 4-20 mA Transmitter
PPS:

Stainless Steel: Pulse Out or Local 4-20 mA Transmitter
High Pressure SS: Pulse Out
Intermed. Pressure SS: Pulse Out or Local 4-20 mA Transmitter

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

Pressure Rating:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Maximum Temperature:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Wetted Mat’l. - Bearings:
Aluminum:
PPS Rotor:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Wetted Mat’l. - Shaft:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.): Aluminum/PPS = 1 lb. (0.45 kg),

High Pressure Stainless Steel = 8 lbs. (3.63 kg),
SS/Intermediate Pressure SS = 2 lbs. (0.91 kg)

Remote Display:

Remote Transmitter:

* Hall Effect Sensor requires dedicated power source.

Reed Switch or Hall Effect Sensor*

PPS or 316 Stainless Steel

Fluorocarbon (Std.), Perfluoroelastomer

Pulse Out or Local 4-20 mA Transmitter

Local Display

0.53 - 26.4 GPH (2 - 100 LPH)

1.32 - 26.4 GPH (5 - 100 LPH)

± 1.0% of reading

± 0.03%

1,000 cps

75 PSI / 5 BAR
75 PSI / 5 BAR
150 PSI / 10 BAR

8.000 PSI / 544 BAR
800 PSI / 55 BAR

176°F / 80°C
176°F / 80°C
248°F / 120°C
248°F / 120°C
248°F / 120°C

3785.4 PPG / 1000 PPL

Aluminum with PPS Cap
PPS
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel

Bronze
N/A
Ceramic
Ceramic
Ceramic

316 Stainless Steel
Hastalloy C / Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel

0.6 - 27.8 Hz @ 0.53 - 26.4 GPH

200 mesh

Option Available: Model GG500

Options Available: Models GA500 & GX500

buy smart.buy value.buy

section 3: gm series - oval gear meters

ML-1800-5 Rev. B 03/07

33

GM003 - 1/4” Oval Gear Pulse Meter

The GM003 is another of the GPI compact
pulse meters. This 1/4-inch Pulse Meter has
an increased flow range and offers the same
ability to handle a wide range of fluid
viscosities with exceptional levels of
repeatability.

A c c u rA c y : ± 1 . 0 % of r e A di n g

Select Your Body Material:

Aluminum

PPS

Stainless Steel

High Pressure Stainless Steel

Intermediate Pressure Stainless Steel

Features and Benefits:

Up to 1,000 cps viscosity with standard rotor;

¸

1,000,000 cps with high viscosity rotor.

Compact size and extremely accurate even

¸

with viscous fluids.

High viscosity stainless steel rotor available.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Handles particles sizes to 0.005”/0.127 mm.

¸

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

GM003 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Materials:

O-Ring:

(Optional)

Output Options:
Aluminum: Pulse Out or Local 4-20 mA Transmitter
PPS:

Stainless Steel: Pulse Out or Local 4-20 mA Transmitter
High Pressure SS: Pulse Out
Intermed. Pressure SS: Pulse Out or Local 4-20 mA Transmitter

Display Options:

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Maximum Temperature:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Wetted Mat’l. - Bearings:
Aluminum:
PPS Rotor:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Wetted Mat’l. - Shaft:
Aluminum:
PPS:
Stainless Steel:
High Pressure SS:
Intermed. Pressure SS:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.): Aluminum/PPS = 1 lb. (0.45 kg),

High Pressure Stainless Steel = 8 lbs. (3.63 kg),
SS/Intermediate Pressure SS = 2 lbs. (0.91 kg)

Remote Display:

Remote Transmitter:

* Hall Effect Sensor requires dedicated power source.

Reed Switch or Hall Effect Sensor*

PPS, 316 Stainless Steel or High Viscosity SS

Fluorocarbon (Std.), Perfluoroelastomer

Pulse Out or Local 4-20 mA Transmitter

Local Display or Local Display w/4-20 mA Output

4 - 132 GPH (15 - 500 LPH)

6 - 132 GPH (25 - 500 LPH)

± 1.0% of reading

± 0.03%

Standard Rotors: 1,000 cps

75 PSI / 5 BAR
75 PSI / 5 BAR
150 PSI / 10 BAR
8,000 PSI / 544 BAR
800 PSI / 55 BAR

176°F / 80°C
176°F / 80°C
248°F / 120°C
248°F / 120°C
248°F / 120°C

1514.2 PPG / 400 PPL

Aluminum with PPS Cap
PPS
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel

Bronze
N/A
Ceramic
Ceramic
Ceramic

316 Stainless Steel
Hastalloy C / Stainless Steel
316 Stainless Steel
316 Stainless Steel
316 Stainless Steel

1.7 - 55.5 Hz @ 4 - 132 GPH

200 mesh

Option Available: Model GG500

Options Available: Models GA500 & GX500

buy smart.buy value.buy

34

03/07 ML-1800-5 Rev. B

GM005 - 1/2” Oval Gear Pulse Meter

The GM005 Meter is a low to medium flow
range model. The construction of this
meter allows for fast and easy servicing
while installed.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

Aluminum

Stainless Steel

Features and Benefits:

GM005 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Materials:

316 Stainless Steel or
High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:
Stainless Steel:

Remote Display:

Remote Transmitter:

Reed Switch or Hall Effect Sensor*

PPS or High Viscosity PPS

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

Local Display

0.26 - 7.9 GPM (1 - 30 LPM)

0.80 - 6.6 GPM (3 - 25 LPM)

± 0.5% of reading

± 0.03%

Standard Rotors: 1,000 cps

800 PSI / 55 BAR

176°F / 80°C
248°F / 120°C

424 PPG / 112 PPL
848 PPG / 224 PPL

Aluminum
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

1.8 - 55.8 Hz @ 0.26 - 7.9 GPM

60 mesh

3.25 lbs. (1.5 kg)

6.0 lbs. (2.7 kg)

Option Available: Model GG500

Options Available: Models GA500 & GX500

section 3: gm series - oval gear meters

High viscosity PPS and Stainless Steel rotors

¸

available.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

ML-1800-5 Rev. B 03/07

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

35

GM505 - 1/2” Oval Gear Mechanical Meter

The GM505 is the 1/2 inch Mechanical
Meter in the Oval Gear Series. Use this
meter with low to medium flow ranges.
The GM505 is available in three fitting/
calibration combinations (NPT Gallon,
NPT Litre and BSP Litre).

A c c u rA c y : ± 1 . 0 % of r e A di n g

GM505 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Materials:

O-Ring:

Output Options:

Display Options:

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:

Maximum Temperature:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:
Stainless Steel:

Mechanical Display

PPS or High Viscosity PPS

Fluorocarbon (Standard), PTFE (Optional)

N/A

Mechanical Display

0.26 - 7.9 GPM (1 - 30 LPM)

0.80 - 6.6 GPM (3 - 25 LPM)

± 1.0% of reading

± 0.03%

Standard Rotors: 1,000 cps

500 PSI / 34.5 BAR

176°F / 80°C

N/A

Aluminum
316 Stainless Steel

PPS

316 Stainless Steel

N/A

60 mesh

3.75 lbs. (1.7 kg)

6.5 lbs. (2.9 kg)

Select Your Body Material:

Aluminum

Stainless Steel

Features and Benefits:

Cumulative and Resettable Totals.

¸

High viscosity PPS rotors available.

¸

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with easy-to-read Mechanical Display.

¸

Certificate of Accuracy supplied with meter.

¸

36

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM006 - 3/4” Oval Gear Pulse Meter

The GM006 Meter is a low to medium flow
range model. This meter is great for
lubrication products and fluids compatible
with aluminum.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

Aluminum

Stainless Steel

GM006 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Materials:

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

Pressure Rating:

Maximum Temperature:
PPS Rotors:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:
Aluminum:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

Remote Display:

Remote Transmitter:

Reed Switch or Hall Effect Sensor*

PPS

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

Local Display

0.8 - 15.8 GPM (3 - 60 LPM)

4.5 - 15.8 GPM (17 - 60 LPM)

± 0.5% of reading

± 0.03%

Standard Rotors: 1,000 cps

800 PSI / 55 BAR

176°F / 80°C

197 PPG / 52 PPL
394 PPG / 104 PPL

Aluminum

PPS

316 Stainless Steel

2.6 - 51.9 Hz @ 0.8 - 15.8 GPM

60 mesh

4.30 lbs. (1.9 kg)

Option Available: Model GG500

Options Available: Models GA500 & GX500

section 3: gm series - oval gear meters

Features and Benefits:

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

ML-1800-5 Rev. B 03/07

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

37

GM007 - 1” Oval Gear Pulse Meter

Meter shown here with
Electronic choice -5.

Use the GM007 with aggressive chemicals
and water. The PPS body and rotor
materials provide excellent chemical
compatibility in this 1-inch meter. This
meter is a great choice when you need a
rugged and reliable meter.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

PPS

PPS with Hastalloy C Shafts

GM007 - SPECIFICATIONS

Fitting Type: BSP or NPT (Female)

Sensor Options:

Rotor Material:

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

Pressure Rating:

Maximum Temperature:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:
PPS:
PPS with Hastalloy C:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.): 3.0 lbs. (1.3 kg)

Remote Display:

Remote Transmitter:

Reed Switch or Hall Effect Sensor*

PPS

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

Local Display

0.8 - 21.0 GPM (3 - 80 LPM)

2.1 - 18.5 GPM (8 - 70 LPM)

± 0.5% of reading

± 0.03%

1,000 cps

150 PSI / 10 BAR

176°F / 80°C

197 PPG / 52 PPL
394 PPG / 104 PPL

PPS

PPS

316 Stainless Steel
Hastalloy C

2.6 - 69.0 Hz @ 0.8 - 21 GPM

60 mesh

Option Available: Model GG500

Options Available: Models GA500 & GX500

Features and Benefits:

PPS body and rotors are excellent for

¸

aggressive chemicals.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

38

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM010 - 1” Oval Gear Pulse Meter

The GM010 Meter is a 1-inch meter
available in Aluminum, Bronze and 316
Stainless Steel body materials. Optional
150# ANSI Flanges and Tri-Clover® Fittings
are available on the GM010.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

Aluminum

Bronze

Stainless Steel

Features and Benefits:

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

GM010 - SpecificationS

Fitting Type:
Aluminum:
Bronze:
Stainless Steel:

Tri-Clover

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:
Aluminum:
Bronze:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

6.6 lbs. (2.9 kg) - 150# ANSI Flange

Bronze:
Stainless Steel:

14.6 lbs. (6.6 kg) - 150# ANSI Flange

10.8 lbs. (4.9 kg) - Tri-Clover

Remote Display:

Remote Transmitter:

BSP or NPT (Female), 150# ANSI Flange
BSP or NPT (Female)
BSP or NPT (Female), 150# ANSI Flange, or

Reed Switch or Hall Effect Sensor*

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

Local Display

1.6 - 32 GPM (6 - 120 LPM)

2.6 - 26.4 GPM (10 - 100 LPM)

± 0.5% of reading

± 0.03%

Standard Rotors: 1,000 cps

800 PSI / 55 BAR or Flange Rule

176°F / 80°C
248°F / 120°C

136.3 PPG / 36 PPL

272.6 PPG / 72 PPL

Aluminum
Bronze
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

3.6 - 72.7 Hz @ 1.6 - 332 GPM

60 mesh

4.9 lbs. (2.2 kg) - Pulse

12.7 lbs. (5.7 kg) - Pulse

12.5 lbs. (5.7 kg) - Pulse

Option Available: Model GG500

Options Available: Models GA500 & GX500

®

Fittings

®

Fittings

section 3: gm series - oval gear meters

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

ML-1800-5 Rev. B 03/07

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

39

GM510 - 1” Oval Gear Mechanical Meter

The GM510 is a Mechanical Meter avail­able in Aluminum, Bronze and 316 Stainless
Steel body materials. Optional 150# ANSI
Flanges are available on the GM510.

A c cu r A cy : ± 1 . 0% o f r e A di n g

Select Your Body Material:

Aluminum

Bronze

Stainless Steel

GM510 - SpecificationS

Fitting Type:
Aluminum:
Bronze:
Stainless Steel:

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
Bronze:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

7.0 lbs. (3.1 kg) - 150# ANSI Flange

Bronze:
Stainless Steel:

13.6 lbs. (6.2 kg) - 150# ANSI Flange

BSP or NPT (Female), 150# ANSI Flange
BSP or NPT (Female)
BSP or NPT (Female), 150# ANSI Flange

Mechanical Display

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

N/A

Mechanical Display

1.6 - 32 GPM (6 - 120 LPM)

2.6 - 26.4 GPM (10 - 100 LPM)

± 1.0% of reading

± 0.03%

Standard Rotors: 1,000 cps

500 PSI / 34.5 BAR or Flange Rule

176°F / 80°C
248°F / 120°C

N/A

Aluminum
Bronze
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

N/A

60 mesh

4.9 lbs. (2.2 kg) - Pulse

12.0 lbs. (5.4 kg) - Pulse

11.7 lbs. (5.3 kg) - Pulse

40

Features and Benefits:

Cumulative and Resettable Totals.

¸

BSP or NPT fittings are standard, optional 150#

¸

ANSI Flanges are available.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with easy-to-read Mechanical Display.

¸

Certificate of Accuracy supplied with meter.

¸

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM015 - 1-1/2” Oval Gear Pulse Meter

The GM015 is our medium to large capac­ity meter with 1-1/2-inch fittings. Optional
150# ANSI Flanges and Tri-Clover® Fittings
are available on the GM015. The GM015 can
be installed without regard to straight pipe
runs making installation easy.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

Aluminum

Bronze

Stainless Steel

Features and Benefits:

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

GM015 - SpecificationS

Fitting Type:
Aluminum:
Bronze:
Stainless Steel:

Tri-Clover

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:
Aluminum:
Bronze:
Stainless Steel:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:
Aluminum:
Bronze:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

12.0 lbs. (5.4 kg) - 150# ANSI Flange

Bronze:
Stainless Steel:

20.9 lbs. (9.4 kg) - 150# ANSI Flange

19.2 lbs. (8.7 kg) - Tri-Clover

Remote Display:

Remote Transmitter:

BSP or NPT (Female), 150# ANSI Flange
BSP or NPT (Female)
BSP or NPT (Female), 150# ANSI Flange or

Reed Switch or Hall Effect Sensor*

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

2.6 - 66 GPM (10 - 250 LPM)

4.0 - 62.5 GPM (15 - 235 LPM)

± 0.5% of reading

± 0.03%

Standard Rotors: 1,000 cps

800 PSI / 55 BAR or Flange Rule
800 PSI / 55 BAR
800 PSI / 55 BAR or Flange Rule

176°F / 80°C
248°F / 120°C

54.9 PPG / 14.5 PPL

109.8 PPG / 29 PPL

Aluminum
Bronze
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

2.4 - 60.4 Hz @ 2.6 - 66 GPM

60 mesh

10.0 lbs. (4.5 kg) - Pulse

18.7 lbs. (8.49 kg) - Pulse

18.4 lbs. (8.4 kg) - Pulse

Option Available: Model GG500

Options Available: Models GA500 & GX500

®

Local Display

Fittings

®

Fittings

section 3: gm series - oval gear meters

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

ML-1800-5 Rev. B 03/07

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

41

GM515 - SpecificationS

GM515 - 1-1/2” Oval Gear Mechanical Meter

The GM515 is a medium to large capacity
meter with Mechanical Sensor and
Display. Optional 150# ANSI Flanges are
available on the GM515 model. This
meter can handle high viscosity fluids
without sacrificing accuracy.

A c cu r A cy : ± 1 . 0% o f r e A di n g

Select Your Body Material:

Aluminum

Stainless Steel

GM515 - SpecificationS

Fitting Type: BSP or NPT (Female), 150# ANSI Flange

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:
Aluminum:
Stainless Steel:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

12.0 lbs. (5.4 kg) - 150# ANSI Flange

Stainless Steel:

20.2 lbs. (9.2 kg) - 150# ANSI Flange

Mechanical Display

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

N/A

Mechanical Display

2.6 - 66 GPM (10 - 250 LPM)

4.0 - 62.0 GPM (15 - 235 LPM)

± 1.0% of reading

± 0.03%

Standard Rotors: 1,000 cps

500 PSI / 34.5 BAR
500 PSI / 34.5 BAR or Flange Rule

176°F / 80°C
248°F / 120°C

N/A

Aluminum
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

N/A

60 mesh

9.9 lbs. (4.5 kg) - Mechanical

17.6 lbs. (8.0 kg) - Mechanical

42

Features and Benefits:

Cumulative and Resettable Totals.

¸

BSP or NPT fittings are standard, optional 150#

¸

ANSI Flanges are available.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.015”/0.38 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with easy-to-read Mechanical Display.

¸

Certificate of Accuracy supplied with meter.

¸

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B

GM020 - 2” Oval Gear Pulse Meter

The GM020 is the largest of our GM Series
Meters. The fitting size is 2 inches on this
large meter. This meter includes NPT or
BSP fittings as standard. Choose from four
rotor options; PPS is standard.

A c c ur Ac y : ± 0. 5 % of re A d in g

Select Your Body Material:

Aluminum

Stainless Steel

Features and Benefits:

NPT or BSP fittings are standard, 150# ANSI

¸

Flanges are optional.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.011”/0.28 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

GM020 - SpecificationS

Fitting Type:
Aluminum:
Stainless Steel:

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Local Display with 4-20 mA Output

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:
Aluminum:
Stainless Steel:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:
Single Pickup:
Double Pickup:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

20.1 lbs. (9.1 kg) - 150# ANSI Flange

Stainless Steel:

46.3 lbs. (2.1 kg) - 150# ANSI Flange

Remote Display:

Remote Transmitter:

BSP or NPT (Female), 150# ANSI Flange
150# ANSI Flange

Reed Switch or Hall Effect Sensor*

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

Pulse Out or Local 4-20 mA Transmitter

Local Display

4.0 - 92.5 GPM (15 - 350 LPM)

8.0 - 79.0 GPM (30 - 300 LPM)

± 0.5% of reading

± 0.03%

Standard Rotors: 1,000 cps

800 PSI / 55 BAR or Flange Rule
Flange Rule

176°F / 80°C
248°F / 120°C

25.3 PPG / 6.7 PPL

50.6 PPG / 13.4 PPL

Aluminum
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

1.7 - 39.0 Hz @ 4.0 - 92.5 GPM

60 mesh

17.1 lbs. (7.8 kg) - Pulse

20.1 lbs. (9.1 kg) - Pulse

Option Available: Model GG500

Options Available: Models GA500 & GX500

section 3: gm series - oval gear meters

Comes with Reed Switch as standard, Hall

¸

Effect Sensor* optional.

Choose from a variety of Output and Display

¸

Options.

Certificate of Accuracy supplied with meter.

¸

ML-1800-5 Rev. B 03/07

* Hall Effect Sensor requires dedicated power source.

buy smart.buy value.buy

43

GM520 - 2” Oval Gear Mechanical Meter

The GM520 is the Mechanical version of
our large capacity meter. Choose from
either Aluminum or 316 Stainless Steel
body materials. This meter can be
mounted horizontally or vertically
depending on your application.

A c cu r A cy : ± 1 . 0% o f r e A di n g

Select Your Body Material:

Aluminum

Stainless Steel

GM520 - SpecificationS

Fitting Type:
Aluminum:
Stainless Steel:

Sensor Options:

Rotor Materials:

or High Viscosity Stainless Steel

O-Ring:

Output Options:

Display Options:

Flow Range:

Flow Range @ < 5 cps:

Accuracy:

Repeatability:

Maximum Viscosity:

High Viscosity Rotors: 1,000,000 cps

Pressure Rating:
Aluminum:
Stainless Steel:

Maximum Temperature:
PPS Rotors:
SS Rotors:

Typical K-Factor:

Wetted Mat’l. - Housing:
Aluminum:
Stainless Steel:

Wetted Mat’l. - Bearings:

Wetted Mat’l. - Shaft:

Frequency Range:

Recommended Strainer Size:

Shipping Weight (approx.):
Aluminum:

20.1 lbs. (9.1 kg) - 150# ANSI Flange

Stainless Steel:

BSP or NPT (Female), 150# ANSI Flange
150# ANSI Flange

Mechanical Display

PPS or High Viscosity PPS, 316 Stainless Steel

Fluorocarbon (Standard), PTFE (Optional)

N/A

Mechanical Display

4.0 - 92.5 GPM (15 - 350 LPM)

7.9 - 79.3 GPM (30 - 300 LPM)

± 1.0% of reading

± 0.03%

Standard Rotors: 1,000 cps

500 PSI / 34.5 BAR or Flange Rule
Flange Rule

176°F / 80°C
248°F / 120°C

N/A

Aluminum
316 Stainless Steel

PPS / Carbon

316 Stainless Steel

N/A

60 mesh

17.1 lbs. (7.7 kg) - Mechanical

46.3 lbs. (2.1 kg) - 150# ANSI Flange

Features and Benefits:

Cumulative and Resettable Totals.

¸

Five Fitting / Calibration offerings are available,

¸

150# ANSI Flanges are one of the options.

Extremely accurate even with viscous fluids.

¸

Handles particles sizes to 0.015”/0.38 mm.

¸

Meter design minimizes the number of wear-

¸

able parts – extending product life.

Comes with easy-to-read Mechanical Display.

¸

Certificate of Accuracy supplied with meter.

¸

44

buy smart.buy value.buy

03/07 ML-1800-5 Rev. B