Type : High Temperature Rechargeable Nickel Metal
Hydride Cylindrical Cell
Nominal Dimension
(with Sleeve)
: Φ = 33.0mm
H = 60.5mm
Applications : Long term standby use. Recommended
discharge current: 700mA to 3500mA
Nominal Voltage : 1.2V
Capacity : Nominal: 7000mAh
Minimum: 7000mAh
Typical: 7350mAh
When discharged at 1400mA to 1.0V at 20℃
Charging Condition : Standard mode:
700mA for 16 hrs at 20℃
Standby intermittent mode:
700mA for 16 hrs at 20℃ then maintenance
with 700mA for 1min/10mins.
Service Life : >350 cycles (IEC 61951-2)
Continuous
Overcharge
: Comply with IEC 61951-2
Permanent Charge Endurance Test
Weight : 146.0g
Internal Resistance : Average 10 mΩ upon fully charged
(Range 6-14 mΩ) at 1000Hz
Max. Charging Voltage : 1.5V at 700mA charging
Ambient Temperature
Range
: Charge:
Discharging:
Storage:
Storage (1 week):
0 to 50
℃
-20 to 70
-20 to 35
℃
℃
-20 to 60℃
Charge / Discharge efficiency Vs. temp.
Model No.: GP700DHT
+0
+ 0
34.2
33.0 – 1.0
- 2
+0
+ 0
60.5 –2.0
- 2
61.5
unit: mm
Low Rate Discharge
1.5
1.4
1.3
1.2
Voltage (V)
1.1
1
0.9
High Rate Discharge
Charge:700mA X 16hrs at 20deg.C
1400mA 700mA
0123456789101112
Discharge Time ( hrs )
Φ12.0(REF.)
7.8-9.5(REF)
120
100
80
60
40
20
Available capacity (%)
0
0 102030405060
Charge:0.05C for 48hrs
Discharge:0.2C until 1.0V
Charge and discharge temp. (℃)
1.5
1.4
1.3
1.2
1.1
Voltage (V)
0.9
Charge:700mA X 16hrs at 20deg.C
1
0.0 0.4 0.8 1.2 1.6 2.0 2.4
Discharge Time ( hrs )
The information (subject to change without prior notice) contained i n this document i s for
reference only and should not be used as a basis for product guarantee or warranty. For
applications other than those described here, please consult your nearest GP Sales and
Marketing Office or Distributors.
www.gpbatteries.com.hk
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved
3500mA
ZRS5052 rev01