Page 1
0
(
Typ e
Nominal Dimension
(with Sleeve)
Applications
Nominal Voltage
Capacity
Charging Condition
Fast Charge
Service Life
Continuous
Overcharge
Weight
Internal Resistance
Max. Charging
Voltage
Ambient Temperature
Range
Fast Charge (Charge control required)
Voltage (V)
1.6
650mA
(1C)
1.5
: Rechargeable Nickel Metal
Hydride Cylindrical Cell
: Φ = 10.5mm
H = 44.5mm
: Recommended discharge current
65 to 1950mA
: 1.2V
: Nominal: 650mAh
Minimum: 630mAh
Typical: 650mAh
When discharged at 130mA to
1.0V at 20℃
: 65mA for 16 hrs at 20℃
: 325mA to 650mA (0.5 to 1C) charge
termination control recommended
control parameters:
-∆V : 0-5mV
**DT/dt
**TCO
**Timer
** for ref. only
: >500 cycles (IEC standard)
: 65mA maximum current for 1 year.
No conspicuous deformation and/or
leakage
: 13.0g
: Average 35mΩ upon fully charged
(Range 20 – 50mΩ) at 1000Hz
: 1.5V at 65mA charging
: Standard Charge : 0 to 45℃
Fast Charging : 10 to 45℃
Discharge : -20 to 50℃
Storage : -20 to 35℃
: 0.8℃/min (0.5 to 0.9C)
0.8 - 1℃/min (1C)
: 45 - 50℃
: 105% nominal input
Model No.:
Low Rate Discharge
1.5
1.4
1.3
1.2
1.1
1
0.9
0.8
0.7
325mA
(0.5C)
0 2 4 6 8 10 12 14
High Rate Discharge
GP65AAAHC
Charge:65mA x 16hrs at 20°C
(0.2C)
130mA
Discharge Time (Hrs)
Charge:65mA x 16hrs at 20oC
65mA
(0.1C)
1.4
325mA
0.5C)
1950mA
(3C)
1300mA
(2C)
650mA
(1C)
The information (subject to change without prior notice) contained in this
document is for reference only and should not be used as a basis for
product guarantee or warranty. For applications other than those
described here, please consult your nearest GP Sales and Marketing
Office or Distributors.
TRS0326 Rev.06
1.3
1.2
1.1
0 20 40 60 80 100 120 140 16
Capacity Input ( % )
www.gpbatteries.com.hk
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved
Loading...