Gp batteries GP20AAAAH DATASHEET

(
Type Nominal Dimension
(with Sleeve) Applications
Nominal Voltage Capacity
Charging Condition Fast Charge
Service Life Continuous Overcharge
Weight Internal Resistance
Max. Charging Voltage Ambient Temperature Range
Fast Charge (Charge Control Required)
1.7
1.6
1.5
1.4
1.3
Voltage(V)
1.2
1.1
200mA
(1C)
0 20 40 60 80 100 120 140 160
: Rechargeable Nickel Metal
Hydride Cylindrical Cell
:
Φ = 8.6mm H = 29.1mm
: Recommended discharge current
20 to 600 mA : 1.2V : Nominal: 200mAh
Minimum: 200mAh
Typical: 210mAh
When discharged at 40mA to
1.0V at 20
:
20mA for 16 hrs at 20 : 100mA to 200mA (0.5 to 1C)
charge termination control
recommended control parameters:
-V **DT/dt
**TCO **Timer
**for ref. only : >500 cycles (IEC standard) : 20mA maximum current for 1 year.
No conspicuous deformation and/or
leakage : 4.70g :
Maximum 500m upon fully charged
at 1000Hz : 1.5V at 20mA charging
:
Standard Charge : 0 to 45
Fast Charging : 10 to 45
Discharge : -20 to 50
Storage : -20 to 35
: 0-5mV : 0.8/min (0.5 to
0.9C)
0.8 - 1/min (1C) : 45 - 50 : 105% nominal input
100mA
(0.5C)
Capacity Input %
Model No.:
GP20AAAAH
+0
8.6
-0.5
+0
29.1
-0.7
Low Rate Discharge
1.5
1.4
1.3
1.2
1.1 1
Voltage(V) Voltage(V)
0.9
0.8
0.7
100mA
(0.5C)
0 2 4 6 8 10 12 14
Charge:20mA x 16hrs at 20
40mA
(0.2C)
Discharge Time (Hrs)
3.3
Ref)
Unit : mm
20mA
(0.1C)
High Rate Discharge
1.5
1.4
1.3
1.2
1.1 1
0.9
0.8
0.7
0 10 20 30 40 50 60 70
600mA
Charge: 20mA x 16hrs at 20
400mA
(3C)
Discharge Time (Mins)
(2C)
200mA
(1C)
The information (subject to change without prior notice) contained in this document is for reference only and should not be used as a basis for product guarantee or warranty. For applications other than those described here, please consult your nearest GP Sales and Marketing Office or Distributors.
www.gpbatteries.com.hk
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. Copyright@GPI International Ltd. – All rights reserved
TRS0133 Rev.04
Loading...