Type : High Temperature Rechargeable Nickel Metal
Hydride Cylindrical Cell
Nominal Dimension
(with Sleeve)
Applications : Long term standby use. Recommended
Nominal Voltage : 1.2V
Capacity : Nomina l: 1600mAh
Charging Condition : Standard mode:
Service Life : >350 cycles (IEC 61951-2)
Continuous
Overcharge
Weight : 37g
Internal Resistance : Average 25 mΩ upon fully charged
Max. Charging Voltage : 1.5V at 160mA charging
Ambient Temperature
Range
Charge / Discharge efficiency Vs. temp. High Rate Discharge
120
100
80
60
40
20
Available capacity (%)
0
0 102030405060
Charge:0.05C for 48hrs
Discharge:0.2C until 1.0V
: Φ = 23.0mm
H = 34.0mm
discharge current: 160mA to 800mA
Minimum: 1600mAh
Typical: 1680mAh
When discharged at 320mA to 1.0V at 20℃
160mA for 16 hrs at 20℃
Standby intermittent mode:
160mA for 16 hrs at 20℃ then maintenance
with 160mA for 1mins/10mins.
Designed for 10 years standby life, end of life
capacity is 60% of nominal capacity at 40℃.
: Comply with IEC61951-2
Permanent Charge Endurance Test
(Range 23 –28 mΩ) at 1000Hz
: Charge:
Discharging:
Storage:
Storage (1 week):
Charge and discharge temp. (℃)
℃
0 to 50
-20 to 70
-20 to 35℃
-20 to 60
℃
℃
Model No.:
+0
23.0
– 1.0
+0
34.0
–1.5
Low Rate Discharge
1.5
1.4
1.3
1.2
Voltage (V)
1.1
1
0.9
1.5
1.4
1.3
1.2
1.1
Voltage (V)
1
0.9
0.0 0.4 0.8 1.2 1.6 2.0 2.4
Charge:160mA X 16hrs at 20deg.C
320mA 160mA
0123456789101112
Charge:160mA X 16hrs at 20deg.C
The information (subject to change without prior notice) contained in this
document is for reference only and should not be used as a basis for product
guarantee or warranty. For applications other than those described here,
please consult your nearest GP Sales and Marketing Office or Distribut ors .
www.gpbatteries.com.hk
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved
GP160SCSHT
Φ10.0(REF
unit:mm
Discharge Time ( hrs )
800mA
Discharge Time ( hrs )
PBR075-01 REV00
.)