TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To avoid electric shock, do not open the cabinet. Refer servicing to qualified personnel only.
The apparatus shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Important safety instructions
1. READ INSTRUCTIONS - All the safety and
operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS - The safety and
operating instructions should be retained for
future reference.
3. HEED WARNING - All warnings on the product
and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS - All operating and
use instructions should be followed.
5. CLEANING - Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a wet cloth for cleaning.
6. ATTACHMENTS - Do not use attachments not
recommended by the product manufacturer, as
they may cause hazards.
7. WATER AND MOISTURE - Do not use this pro duct near water - for example, near a bath tub,
wash bowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool and the like.
8. ACCESSORIES - Do not place this product on an
unstable cart, tripod, bracket or table. The product
may fall, causing serious injury to a child or adult,
and serious damage to the product.
9. A PRODUCT AND CART
COMBINATION SHOULD
BE MOVED WITH CARE -
Quick stops, excessive force
and uneven surfaces may cause
the product and cart combination to overturn.
10.VENTILATION - Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should
not be placed in a built-in installation, such as a
bookcase or rack, unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to .
Precautions
2
11. POWER SOURCES - This product should be
operated only from the type of power source
indicated on the making label. If you are not sure
of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
12. DAMAGE REQUIRING SERVICE - Unplug this
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen
into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in
performance, this indicates a need for service.
13. POWER-CORD PROTECTION - Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the product.
14. LIGHTNING - For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent
damage to the product due to lightning and power-
line surges.
15. OVERLOADING - Do not overload wall out-
lets, extension cords, or integral convenience
receptacles, as this can result in a risk of fire
or electric shock.
16. OBJECT AND LIQUID ENTRY - Never push
objects of any kind into this product through
openings, as they may touch dangerous volt-
age points or shout-out parts that could result
in a fire or electric shock. Never spill liquid of
any kind on the product.
17. SERVICING - Do not attempt to service this
product yourself.
18. REPLACEMENT PARTS - When replacement
parts are required, be sure the service technician
has used replacement parts specified by the
manufacturer or that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
19. SAFETY CHECK - Upon completion of any
service or repairs to this product, ask the service
technician to perform safety checks to determine
that the product is in proper operating condition.
20. WALL OR CEILING MOUNTING - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
21. HEAT - The product should be situated away
from heat sources such as radiators, heat
registers, stoves or other products (including
amplifiers) that produce heat.
Manufactured under License from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. 1992
-1997 Dolby Laboratories.
All rights reserved.
Precautions
Safety precautions
This appliance is a Class I laser product. Direct exposure to beam may cause eye injury.
Power requirement for this appliance is 120V, AC 60 Hz. Please ensure the power supply to your home
is in this range before using the recorder.
Operating precautions
Please use the original packing case and materials when transporting this DVD recorder.
The temperature of the top cover and rear panel of the recorder may be high after playing for a long period of
time. This is normal.
When the recorder is not in use, please remove the disc and turn the power off.
Malfunctions may occur if the recorder has not been used for a long period of time. For best results, turn it on
occasionally.
Some kinds of discs may cause the unit to hang or freeze. Please restart the unit when this occurs. Wait at least
10 seconds before restarting to extend the life of the recorder.
Placement
Picture and sound quality may be affected when the DVD recorder is placed close to a TV set, radio or
VCR, so please place these items as far away from the unit as possible.
3
Maintenance
The DVD recorder is a high-precision device. The image quality may be impaired if the laser head or disc driving
parts are dirty or damaged.
Condensation precautions
Condensation may damage the recorder. Condensation may occur when:
the recorder is moved from cold to warm surroundings;
the recorder is placed near a heater or air conditioner;
the recorder is moved from an air-conditioned room to a place of high temperature and humidity;
the recorder is being used in an environment with high humidity.
Do not use the recorder where condensation may form easily, otherwise damage may occur to the disc and/or
recorder. Please remove the disc, plug in the power cord and turn the recorder on. The moisture should evaporate
within two or three hours.
Cleaning precautions
Use a soft and dry cloth for cleaning.
For stains that cannot be removed easily, apply some diluted neutral detergent to a cloth, wring the cloth dry,
wipe the stains away, then use a dry cloth to clean. Do not use solvents such as thinner or benzine; otherwise
the surface of the recorder may be damaged.
Special Go Video Features
AutoPlay
Tired of wading through confusing and inconsistent menus upon loading rented DVD discs? When the
AutoPlay feature is active, the DVD+VCR will find the beginning of the movie on most discs and begin
playing the movie automatically. To enable this feature, turn AutoPlay "On" in the recorder Setup menu.
To enable the AutoPlay feature:
1. While DVD playback is stopped, press the SETUP button.
2. Use the buttons to select PLAY and press ENTER.
3. Use the / buttons to select AutoPlay and press ENTER.
4. Use the / buttons to select ON or OFF and press ENTER.
5. Press SETUP repeatedly to exit.
Playback Setup
TV aspect ratio
Rating level
Digital audio output
Closed captions
AutoPlay
YourDVD
On*
Off
On*
Off
4
YourDVD
The YourDVD feature automatically searches for your preferences every time you load a DVD disc. It then
finds and selects your preferred Audio, Subtitle and Surround Sound settings (if available) so you don't
have to access the disc menu. A special YourDVD screen appears on your TV when a disc is loaded
informing you if your playback preferences were found on the disc. To enable this feature, set your Audio,
Subtitle and Surround preferences in the Setup menu and then enable "YourDVD" as follows:
1. While DVD playback is stopped, press the SETUP button.
2. Use the buttons to select PLAY and press ENTER.
3. Use the / buttons to select YourDVD and press ENTER.
4. Use the / buttons to select ON or OFF and press ENTER.
5. Press SETUP repeatedly to exit.
YourDVD
Searching for Preferences
Subtitle Language English
Audio Language English
Surround Mode 2 Channel
Table of Contents ..........................................................................................................................................
Front panel ...............................................................................................................................................
Remote control ........................................................................................................................................
FRONT ..................................................................................................................
Special Features
Playing Discs ...............................................................................................................................................
PLAYING A DVD-VIDEO DISC ................................................................................................................
PLAYING A DVD+RW OR DVD+R DISC ...............................................................................................
GENERAL FEATURES ...........................................................................................................................
Locating a Specific Title, Chapter or Track .................................................................................................
LOCATING A TITLE ................................................................................................................................
LOCATING A SPECIFIC CHAPTER OR TRACK ...................................................................................
Please refer to the relevant chapters for detailed descriptions of these buttons:
1. REMOTE SIGNAL EMITTER
10
11
12
13
14
15
16
17
18
1
19
20
21
22
23
24
25
26
27
28
GO TO
PLAY
SLOW
POWER
MENU
TITLE
SUBTITLE
AUDIO
PAUS E
STOP/RETURN
2
OPEN/CLOSE
SETUPDISPLAY
3
4
5
6
7
8
RANDOM
PREV.
REW
NEXT
F F
9
29
30
ENTER
ZOOM
ADD/CLEAR
REPEAT
P.S C A N
ANGLE
BOOKMARK
VIEW
EDITTIMER
RECORD
INPUTDISC OP.
+
CH
VOL
31
32
33
34
35
36
37
38
2. SETUP
3. OPEN/CLOSE
4. 0-9
5. RANDOM
6. NEXT
7. PREVIOUS
8. FAST FORWARD
9. REWIND
10. ARROW KEYS
11. TIMER
12. ZOOM
13. ANGLE
14. ADD/CLEAR
15. BOOKMARK
16. REPEAT
17. VIEW
18. PROGRESSIVE SCAN
19. DISPLAY
20. POWER
21. MENU
22. TITLE
23. SUBTITLE
24. GO TO
25. AUDIO
26. PLAY
27. PAUSE
28. STOP/RETURN
29. SLOW MOTION
30. ENTER
31. EDIT
32. RECORD
33. DISC OP.
34. INPUT
35. VOL+
36. CH
37. VOL-
38. CH
7
Connections
AUDIO OUTPUT CONNECTIONS
Dolby Pro Logic Surround Sound (GOOD)
Enjoy Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers,
a center speaker, and one or two rear speakers).
Surround Audio Amplifierfor Home Theater
To AUDIO IN jacks
TA-3020
8
To AUDIO OUT
(LEFT/RIGHT)
jacks
FRONT
LEFT
CENTER
FRONT
RIGHT
SURROUND RIGHTSURROUND LEFT
Dolby Digital Surround Sound (BETTER)
Enjoy the dynamic sound of Dolby Digital by connecting an amplifier equipped with a digital audio input and
speaker system.
- or -
FRONT
LEFT
5.1CH AMPLIFIER
Surround Audio Amplifierfor Home Theater
TA-3020
CENTER
SUBWOOFER
FRONT
RIGHT
SURROUND RIGHTSURROUND LEFT
Connections
VIDEO OUTPUT CONNECTIONS
GOODBETTER
Video cableS-Video cable
TVTV
Connect your recorder with an S-Video cable (not
included), if your TV is equipped with an S-Video
input. Do not connect the yellow video cable when
using an S-Video cable.
9
COMPONENT VIDEO OUTPUT (BEST)
The Component Video output allows you to enjoy
the best picture quality from a DVD video disc.
Connect your recorder with a Y /Pb/Pr Component
Video cable (not included) if your TV is equipped
with a Progressive Scan or Component Video input.
Switch between Progressive Scan or Interlace Scan
by pressing the P.SCAN button on the remote
control.
Component
video cables
TV
Connections
TV TUNER CONNECTIONS
DVD recorder
10
Outdoor Antenna
Signal input
Video
cable
TV
NOTE
Refer to your TV owner's manual if necessary.
Turn off the power and unplug both the TV and DVD recorder before making connections.
The ANTENNA OUT jack is for signal pass-thru only NOT FOR DVD PLAYBACK. Use the video, S-Video,
or Component Video outputs for DVD playback.
Audio
cables
(L, R)
Signal output
Connections
REAR A/V CONNECTIONS
You can watch or record from an external source (such as a VCR or cable box) connected to the rear panel
Audio/Video inputs.
External Source
S-VIDEO
VIDEO
OUT
AUDIO OUT
LEFT RIGHT
Use either S-Video or Video cable
DVD recorder
OUT
Audio cables
(left, right)
11
Video
cable
Audio
cables
(L, R)
Signal output
Connect your recorder with an S-Video cable (not
included) if your external Source is equipped with
an S-Video input. Do not connect the yellow video
TV
cable when using an S-Video cable.
NOTE
Refer to the owner's manual of your external source if necessary.
Turn off the power and unplug your external source and DVD recorder before making connections.
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.