•Insert two 1.5V AA batteries, paying
attention to the correct polarities (+/-).
•Replace cover.
Coaxial Cable
Audio/Video Cable
Copyright/Trademarks
Go-Video is a registered trademark of SONICblue Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corp. DTS is a trademark of DTS Technology, LLC. All other brand and product names are trademarks or registered trademarks of their respective companies.
• Playable Media ............................................................................................................................................................1
Remote Control Overview....................................................................................................................................2
Front Panel Overview .............................................................................................................................................4
• Front Panel Features ....................................................................................................................................................4
• Front Panel Display Indicators ....................................................................................................................................5
• Component Video Connections...................................................................................................................................9
• Alternative Cable Box Connection............................................................................................................................13
• Other Audio/Video Connections ...............................................................................................................................14
3 - Setup 15
About Menu Navigation .......................................................................................................................................15
Auto Setup...................................................................................................................................................................15
• Auto Play/Rewind .....................................................................................................................................................18
• Auto Repeat ...............................................................................................................................................................19
• Record Source ...........................................................................................................................................................19
• Auto Clock Set ..........................................................................................................................................................20
• Time Zone .................................................................................................................................................................21
• Clock Set Channel .....................................................................................................................................................21
• Set Clock Manually ...................................................................................................................................................22
• Tuner Band ................................................................................................................................................................23
• Auto Channel Search.................................................................................................................................................23
• Show Weak Channels................................................................................................................................................24
DVD Setup ...................................................................................................................................................................25
• TV Aspect Ratio........................................................................................................................................................25
• Still Mode ..................................................................................................................................................................25
• Black Level................................................................................................................................................................26
• Alt Video Out ............................................................................................................................................................26
• Audio Language ........................................................................................................................................................27
• Disc Menu Language.................................................................................................................................................28
• Dolby Digital Decoder ..............................................................................................................................................29
Rating Control Setup.............................................................................................................................................30
• To Play a DVD, CD or VCD.....................................................................................................................................31
• To Play a VHS Tape..................................................................................................................................................32
• To Record to VHS Tape ............................................................................................................................................34
• Options During Recording ........................................................................................................................................35
Copying DVD to VHS..............................................................................................................................................36
• To copy a DVD to VHS tape.....................................................................................................................................36
• To Set a Timer Recording .........................................................................................................................................37
• Complete Program Record (CPR) .............................................................................................................................38
Special Playback Features .................................................................................................................................41
• 3D Sound ..................................................................................................................................................................43
• Random Playback .....................................................................................................................................................44
Search Features .......................................................................................................................................................45
• About Index Marks....................................................................................................................................................45
• Index Search/Scan .....................................................................................................................................................45
• Direct Time Search....................................................................................................................................................46
• Return to 0:00:00.......................................................................................................................................................46
• Customer Service Information ..................................................................................................................................47
• Important Safety Instructions ....................................................................................................................................52
Congratulations on your purchase of this Go-Video DVD+VCR. In case warranty service is required, please take a moment to
attach your receipt to this manual and write down your Serial Number, located on the back panel of the DVD+VCR:
__________________________________.
Started
Playable Media
This DVD+VCR can play discs/videotapes with the following logos:
•DVD
•VHS
•Dolby Digital
•DTS
•CD-Audio
•VCD/SVCD
•MP3 files burned on CD-R/RW
•Stereo
•Hi-Fi
•NTSC
•Region 1
• CD-ROM, CD-G, photo CD, and CD-i discs cannot be played
on this DVD player.
ConnectionsGetting
SetupBasic
Operations
Features
Advanced
Help
1
:: Remote Control Overview
1
1
1
1
1
1
1
1
1
9
0
1
2
3
4
5
9
6
8
7
0
1
2
3
1
1POWER Press to power the DVD+VCR on or off.
2TRK+/- While a tape is playing, press to manually adjust tracking
(i.e., to remove white lines from the screen).
30-9 Use to select channels and set menu items.
4SKIP/F.ADV Press to skip ahead in one-minute increments, up to 5
minutes, during VCR playback. Press to advance one frame at a time in
Pause mode.
5SHUTTLE <</>> Press the 4 and 6 buttons to scan forward and
backward at variable speeds.
6MODE/REPEAT Press to set the Play Mode to Random or Pro-
grammed Play. Also press to set the Repeat Mode to Title, Chapter/
Track, or A/B Repeat (DVD only).
7ZOOM Press to zoom in at 2 or 4 times normal magnification (DVD
only).
8100+/3D SOUND Press to select cable channels 100 and above.
Also press to activate the 3D Sound feature, which creates the illusion of
surround sound with only two speakers (DVD only).
9DVD Press to set the remote control to operate the DVD deck.
10 MUTE Press to turn audio on or off.
11 VOL +/- Press to adjust the volume.
12 STOP JPress to stop playback.
13 REW AAIn DVD mode, press to skip to the previous track. In VCR
mode, press to rewind the tape. Press and hold to scan backward during
playback.
14 REC FPress once to start recording in the VCR deck. Press repeatedly
to add recording time in 30-minute increments.
15 ARROW KEYS Y/B/A/"Press to navigate in the menu system, see
page 15.
16 SETUP/ENTER Press to display the DVD+VCR menu system and
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
2
2
2
2
2
2
2
2
2
2
3
3
3
3
confirm menu settings.
17 SP/SLP/TITLE Press to set the VCR record speed to SP (Standard
Play) or SLP (Super Long Play). SLP is three times longer than SP. Also
press to display DVD title menus (for discs with multiple titles only)
DVR4300 DVD+VCR
2
18 SET TIMER/SUBTITLE Press to set timer recordings. Also press to select available subtitle languages (DVD only).
19 AUTO Press to resume automatic tracking (VCR only).
20 EJECT In VCR mode, press to eject the tape from the VCR deck. In DVD mode, press to open and close the DVD disc
drawer.
21 TV/VCR Press to switch between your television’s tuner and the DVD+VCR tuner (for RF connections only).
22 CLOCK/COUNTER Press to view the clock, tape counter, or time remaining on the front panel display.
23 CLEAR Press to reset the tape counter to zero (0:00:00), or to clear menu items.
24 DISP Press to view the DVD+VCR On-Screen Display.
25 VCR Press to set the remote control to operate the VCR deck.
26 TV VIEW Press to view each DVD+VCR input source: DVD, VCR, Tuner, Line 1, and Line 2.
27 CH Y/BPress to select the next or previous channel.
28 LAST CH/ANGLE Press to display the last channel viewed. Also, press to select scenes shot from multiple angles (DVD
only).
29 PLAY/PAUSE "|| Press once to start playback. Press again to pause playback. Press again to resume playback.
30 FF "" In DVD mode, press to skip to the next track. In VCR mode, press to fast-forward the tape. Press and hold to scan for-
ward during playback.
31 DISC MENU Press to view the DVD disc menu.
32 RETURN/AUDIO Press to go back one menu item, or to exit the menu system. Press to select available audio tracks/for-
mats.
33 SEARCH/INDEX/MARK Press to display the Search Menu, or to place Index marks on the tape. Also press to bookmark
up to three scenes during DVD playback.
Started
ConnectionsGetting
SetupBasic
Operations
Features
Advanced
Help
3
:: Front Panel Overview
Front Panel Features
1DVD DECK Deck used for playback of DVD, CD, VCD/SVCD and CD-R/RW discs.
2EJECT Press to open and close the DVD deck, or to eject the tape from the VCR deck.
3VCR DECK Deck used for playback of VHS tapes.
4DVD-VCR Press to toggle control between the DVD deck and the VCR deck.
5SETUP Press to display the DVD+VCR menu system and confirm menu settings.
6CH Y/B Press to select the next or previous channel.
7COPY Press to copy from DVD to VCR. The DVD+VCR will not copy Macrovision® encoded DVDs.
8POWER Press to power the DVD+VCR on or off.
9PLAY/PAUSE "|| Press once to start playback. Press again to pause playback. Press again to resume playback.
10 REW AAIn DVD mode, press to skip to the previous track. In VCR mode, press to rewind the tape. Press and hold to scan
backward during playback.
11 STOP JPress to stop playback.
12 FF "" In DVD mode, press to skip to the next track. In VCR mode, press to fast-forward the tape. Press and hold to scan for-
ward during playback.
13 REC FPress once to start recording in the VCR deck. Press repeatedly to add recording time in 30-minute increments.
14 FRONT PANEL DISPLAY Displays feedback on DVD+VCR operation.
DVR4300 DVD+VCR
4
15 MENU NAVIGATION KEYS A/"/Y/BUse to navigate within the DVD+VCR menu system without the remote control.
16 LINE IN 2 (VIDEO L-AUDIO-R) Connect to the audio/video outputs of a camcorder, video game or other component.
Match yellow (video), red (right audio) and white (left audio) accordingly. Use the white input jack when connecting mono
sources. Referred to as Line 2 in the menu system.
Front Panel Display Indicators
1DVD DECK DVD deck is active.
2DVD STATUS Disc is loaded.
3TITLE Current title number.
4DVD+VCR STATUS Time, counter position, time remaining, or playback status.
5VCR STATUS VHS tape is loaded.
6RECORD STATUS VHS recording is in progress.
7VCR DECK VCR deck is active.
8COPY Copy is in progress.
93D SOUND 3D Sound is active.
10 DTS DVD with DTS (Digital Theater Sound) 5.1 is loaded.
11 CHAPTER Current chapter number.
12 STEREO Current television show (or VHS tape) is in stereo.
13 TIMER RECORD Timer recording is programmed or in progress. Blinks if there is an error.
Started
ConnectionsGetting
SetupBasic
Operations
Features
Advanced
Help
5
:: Rear Panel Overview
1IN (FROM ANT.) Connect to your antenna, cable TV, or cable box with a coaxial cable.
2OUT (TO TV) Connect to your television with a coaxial cable.
3LINE OUT (DVD & VCR) Connect to the audio/video inputs of your television or stereo receiver using standard audio/
video cables.
4LINE IN 1 Connect to the audio/video outputs of an external device, such as a video game or additional VCR. Referred to as
Line 1 in the menu system.
5LINE OUT (DVD Only) Connect to the audio inputs of your television or stereo receiver using standard audio cables.
These audio outputs are for use with the S-Video or Component Video outputs only.
6COMPONENT VIDEO OUT Connect to a television or display device equipped with Component video inputs (Y, Pb, Pr).
For the audio signal, use either Line Out or Digital Audio Out. For DVD playback only.
7DIGITAL AUDIO OUT (COAXIAL) Connect to an audio/video receiver equipped with a coaxial input (for DVD play-
back only).
8S-VIDEO OUT Connect to a television or display device equipped with an S-Video input. For the audio signal, use either
Line Out or Digital Audio Out. For DVD playback only.
DVR4300 DVD+VCR
6
Chapter 2Connections
:: Basic Connections
The following connections are required in order to operate your DVD+VCR:
1Connect Antenna to DVD+VCR Connect the coaxial cable from your
antenna or cable TV jack to the IN (FROM ANT.) jack on the DVD+VCR back
panel.
2Connect DVD+VCR to TV Choose either RF Out or Line Out:
a. RF Out Use if you have an older television with only a basic antenna input:
Connect the supplied coaxial cable from the OUT (TO TV) jack on the
DVD+VCR back panel to the antenna in jack on your television.
b. Line Out Use for better sound and picture quality if your television has
audio/video inputs: Connect the supplied audio/video cable from the LINE OUT
jacks on the DVD+VCR back panel to the line in jacks on your television.
3Power on DVD+VCR & TV Plug the DVD+VCR power cord into a stan-
dard 120V/60Hz wall outlet, and turn on your television and DVD+VCR.
4Select Channel 3 or Line If you used the RF Out connection, tune your
television to channel 3. If you used the Line Out connection, set your television
to its Line or Aux input.
• The Language/Langue/Idioma menu should appear on your
television screen. Please proceed with Auto Setup on page 15.
• In order to view the setup menus, you MUST connect the
DVD+VCR to your television with the RF or Line Out connections, even if you plan to use the S-Video or Component Video
outputs.
• If you are not getting a good picture, try changing the RF Output to channel 4; see page 17.
Antenna/Cable
DVD+VCR
Television
Started
ConnectionsGetting
SetupBasic
Operations
Features
Advanced
Help
7
:: Advanced Connections
S-Video Connections
Use for improved picture quality when watching DVD movies. Before you
begin, please note the following:
•Your television must be equipped with an S-Video input.
•You can only watch the DVD player through the S-Video output. The VCR,
tuner and menu system are only available through the RF Out or Line Out
connection, see page 7.
1Connect S-Video to TV Connect an S-Video cable from the S-VIDEO
OUT jack on the back panel of the DVD+VCR to the S-Video input on your
television.
2Connect Stereo or Digital Audio to TV Connect stereo audio
cables from the Line Out jacks on the back panel of the DVD+VCR to the
line in jacks on your television or stereo receiver, OR connect the coaxial
digital audio output to your audio/video receiver; see page 11.
3Enable S-Video in the DVD+VCR Menu System See Alt Video
Out on page 26 (required).
• Remember: You can only watch the DVD player through the SVideo output.You must use the basic RF or Line Out connection
to watch VHS movies or to view DVD+VCR setup menus, see
page 7.
DVD+VCR
Television
DVR4300 DVD+VCR
8
Component Video Connections
Use for superior picture quality when watching DVD movies. Before you begin,
please note the following:
•Your television must be equipped with Component Video inputs.
•You can only watch the DVD player through the Component Video outputs.
The VCR, tuner and menu system are only available through the RF Out or
Line Out connection, see page 7.
1Connect Component Video to TV Connect a component video cable
from the COMPONENT VIDEO OUT jacks on the back panel of the
DVD+VCR to the component video inputs on your television. Be sure to
correctly match each of the cables (red, green and blue) to their corresponding jacks on the DVD+VCR and TV.
2Connect Stereo or Digital Audio to TV Connect stereo audio
cables from the Line Out jacks on the back panel of the DVD+VCR to the
line in jacks on your television or stereo receiver, OR connect the coaxial
digital audio output to your audio/video receiver; see page 11.
3Enable Component Video in the DVD+VCR Menu System See
Alt Video Out on page 26 (required).
• Remember: You can only watch the DVD player through the
Component Video outputs.You must use the basic RF or Line
Out connection to watch VHS movies or to view DVD+VCR
setup menus, see page 7.
DVD+VCR
Started
ConnectionsGetting
SetupBasic
Television
Operations
Features
Advanced
Help
9
Stereo Receiver Connections
Follow these steps to connect the DVD+VCR to a stereo receiver:
1Connect DVD+VCR to Stereo Receiver Connect stereo audio
cables from the Line Out jacks on the back panel of the DVD+VCR to the
line in jacks on your stereo receiver.
2Select Line or Aux Set your stereo receiver to its Line or Aux input
(refer to your stereo owner’s guide for the proper setting).
DVD+VCR
DVR4300 DVD+VCR
10
Stereo Receiver
Audio/Video Receiver Connections
Follow these steps to connect the DVD+VCR to an audio/video receiver.
1Connect DVD+VCR to Audio Receiver Connect a coaxial digital
audio cable from the DIGITAL AUDIO OUT jacks on the back panel of the
DVD+VCR to the matching digital audio input on your audio/video receiver.
2Adjust Dolby/DTS Decoder Settings Set Dolby Digital Decoder
and DTS Decoder in the menu system (required); see page 29.
• If your audio/video receiver is equipped with a Dolby Digital or
DTS Decoder, you MUST enable the correct decoder setting in
the menu system to prevent damage to your speakers; see
page 29
Started
DVD+VCR
ConnectionsGetting
SetupBasic
Digital Audio Receiver
11
Operations
Features
Advanced
Help
Cable Box/Satellite Receiver Connections
Follow these steps to connect a cable box or satellite receiver to your
DVD+VCR:
1Connect incoming cable to cable box Connect a coaxial cable
from your cable TV or satellite jack to the input jack on your cable box/satellite receiver.
2Connect cable box to DVD+VCR Connect a second coaxial cable
from the output jack on the cable box/satellite receiver to the IN (FROM
ANT.) jack on the back panel of the DVD+VCR.
3Connect DVD+VCR to TV Connect an additional coaxial cable from
the OUT (TO TV) jack on the back panel of the DVD+VCR to the antenna in
jack on your television.
OR
Connect the supplied audio/video cable from the LINE OUT jacks on the
DVD+VCR back panel to the line in jacks on your television.
4Power on DVD+VCR, TV & cable box Plug the DVD+VCR power
cord into a standard 120V/60Hz wall outlet, and turn on your television,
DVD+VCR and cable box/satellite receiver.
5Select Channel 3 or Line Tune your television to channel 3, or to the
TV’s Line/Aux input.
• The Language/Langue/Idioma menu should appear on your
television screen. Please proceed with Auto Setup on page 15.
• Use your cable box/satellite receiver to select channels.
If you are not getting a good picture, try changing the RF Output to channel 4; see page 17.
• This method of connecting a cable box allows you to record
scrambled channels, but you will not be able to watch a second
channel while a recording is in progress. If you want to record
from basic cable and watch scrambled channels simultaneously,
see Alternative Cable Box Connection on the next page.
Incoming Signal
Cable Box/
Satellite Receiver
DVD+VCR
Te le vi s io n
DVR4300 DVD+VCR
12
Alternative Cable Box Connection
This connection method allows you to record from basic cable and watch scrambled channels simultaneously. However, you will not be able to record scrambled
channels.
1Connect incoming cable to DVD+VCR Connect a coaxial cable
from your cable (CATV) or satellite wall outlet to the IN (FROM ANT.) jack
on the back panel of the DVD+VCR.
2Connect DVD+VCR to cable box Connect a second coaxial cable
from the OUT (TO TV) jack on the back panel of the DVD+VCR to the
input jack on your cable box/satellite receiver.
3Connect cable box to TV Connect an additional coaxial cable from
the output jack on the cable box/satellite receiver to the antenna in jack on
your television.
4Power on DVD+VCR, TV & cable box Plug the DVD+VCR power
cord into a standard 120V/60Hz wall outlet, and turn on your television,
DVD+VCR and cable box/satellite receiver.
5Select Channel on TV & cable box Tune your television and cable
box/satellite receiver to channel 3.
• The Language/Langue/Idioma menu should appear on your
television screen. Please proceed with Auto Setup on page 15.
• To watch the cable box, turn off the DVD+VCR, set your TV to
channel 2, 3 or 4 (whichever channel is used by your cable system), and change channels on the cable box.
• To watch and record basic cable, select the channel to record
on the DVD+VCR and the channel to watch on the cable box.
Incoming Signal
DVD+VCR
Cable Box/
Satellite Receiver
Started
ConnectionsGetting
SetupBasic
Operations
Te le vi s io n
13
Features
Advanced
Help
Other Audio/Video
Connections
Follow these steps to connect an external audio/video
device, such as a camcorder or video game, to your
DVD+VCR. The DVD+VCR will automatically detect
when a device is plugged into the front line input; see
“Automatic Input Switching” below.
1Connect device to DVD+VCR Connect
audio/video cables from the line outputs of your
device to the line inputs on the rear (Line 1) or front
(Line 2) of the DVD+VCR.
2Choose from the following options:
To View Device Press TV VIEW until Line 1
or Line 2 appears on your television screen.
To Record from Device Press TV VIEW
until Line 1 or Line 2 appears on your television
screen, then press REC
To Timer Record from Device Select Line
1 or Line 2 as your Record Source in the Timer
Record menus; see page 37.
Automatic Input Switching will automatically change your TV’s
view to match whatever media you are using. For example, if you
play a DVD, the DVD+VCR will switch to DVD view. Likewise, if
you play a videotape, the player will switch to VCR view. It will
even detect if you plug an external device, such as a camcorder,
into the front line inputs. The DVD+VCR will detect that the
device has been plugged in and switch to Line 2 automatically.
F on the VCR deck.
DVD+VCR (Line In 1)DVD+VCR (Line In 2)
External Audio/Video Device(s)
DVR4300 DVD+VCR
14
Loading...
+ 46 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.