GoVideo DVP745 User Manual

DVP745 User's ManualDVP745 User's Manual

DVD PlayerDVD Player

Content

Introduction

Safety Precautions

Important Safety Instructions

Caution

Features

Front Panel and Rear Panel Illustration

VFD Illustration

Remote Control

Connections

Connecting to a TV set

Connecting to an AV Amplifier with 2 Channel Analog Audio Input

Connecting to an AV Amplifier with Digital Audio Input

Connecting to headphones

Basic Playback

2

3

5

6

7

8

9

10

11

12

13

Basic Operation

Advanced Features

Modes and Features Setup

Remote Control Operation

MP3 Playback

Other

Troubleshooting

Specifications

Remote Control Preparation

14

15

22

33

34

35

36

-1-

Safety Precautions

Introduction

CAUTION:

RISK OF ELECTRIC SHOCK

THE LIGHTNING FLASH WITH ARROW­HEAD SYMBOL WITHIN AN EQUI­LATERAL TRIANGLE IS INTENDED TO A­LERT THE USER TO THE PRESENCE OF
UNINSULATED "DANGEROUS VOLTAGE"
WITHIN THE UNIT'S CABINET THAT MAY
BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED
TO ALERT THE USER TO THE PRE­SENCE OF IMPORTANT OPERATING
AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE MANUAL AC­COMPANYING THE UNIT.

WARNING:

CAUTION

DO NOT OPEN

THE UNIT EMPLOYS A LASER SYSTEM. TO EN­SURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR FU­TURE REFERENCE.

IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR OUR SERVICE CENTER-SEE
"TROUBLESHOOTING".

TO PREVENT DIRECT EXPOSURE TO THE LASER
RADIATION, DO NOT OPEN THE CABINET. VI­SIBLE LASER MAY RADIATE WHEN THE CABINET
IS OPENED OR THE INTERLOCKS ARE DE­FEATED. DO NOT STARE INTO THE LASER
BEAMS.

CAUTION:

THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS DVD VIDEO
PLAYER IS HARMFUL TO THE EYES, DO NOT
ATTEMPT TO DISASSEMBLE THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER
ATTEMPT TO OPEN THE CABINET, DANGEROUS
HIGH VOLTAGES ARE PRESENT IN THE UNIT. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

TO PREVENT ELECTRIC SHOCKS, MATCH WIDE­BLADE PLUG WITH WIDE SLOT AND FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED TO
WATER AND NO OBJECTS FILLED WITH LIQUIDS
SUCH AS VASES SHALL BE PLACED ON THE
APPARATUS.

WARNING:

FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT EX­PRESSLY APPROVED BY MAKER OR ITS AU­THORIZED PARTIES, COULD VOID USER'S AU­THORITY TO OPERATE THIS EQUIPMENT.

Remark

PLEASE WRITE DOWN THE MODEL NO. AND SE­RIAL NO. PRINTED ON THE REAR PANEL.

Model No._________________

Serial No.___________________

-2-

Important Safety Instructions

Introduction

1. Read Instructions

All the safety and operating instructions should be
read before the product is operated.

2. Retain Instructions

The safety and operating instructions should be
retained for future reference.

3. Heed Warnings

All warnings on the product and in the operating
instructions should be adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

5. Cleaning

Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

6. Attachments

Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

7. Water and Moisture

Do not use this product near water for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool;
and the like.

8. Accessories

Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer's
instructions, and should use a mounting accessory
recommended by the manufacturer.

9. Portable Cart Warning

A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.

10. Ventilation

Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.

11. Power Sources

This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.

12. Grounding or Polarization

This product may be equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.

13. Power Cord Protection

Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the product.

14. Protective Attachment Plug

The product is equipped with an attachment plug
having overload protection. This is a safety feature.
See Instruction Manual for replacement or resetting
of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that
has the same overload protection as the original plug.

(Symbol provided by RETAC)

-3-

Important Safety Instructions

Introduction

15. Outdoor Antenna Grounding

If an outside antenna or cable system is connected
to the product, be sure the antenna or cable system
is grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding
of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure
below.

20. Servicing

Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

21. Damage Requiring Service

Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:

A) When the power-supply cord or plug is

damaged,

B) If liquid has been spilled, or objects have fallen

into the product,

C) If the product has been exposed to rain or

water,

D) If the product does not operate normally by

following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation,

E) If the product has been dropped or damaged in

any way, and

F) When the product exhibits a distinct change in

performance this indicates a need for service.

16. Lightning

For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power lines surges.

17. Power Lines

An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to
keep from touching such power lines or circuits as
contact with them might be fatal
.

18. Overloading

Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in
a risk of fire or electric shock.

19. Object and Liquid Entry

Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.

22. Replacement Parts

When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.

23. Safety Check

Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.

24. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.

25. Heat

The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.

-4-

Caution

Introduction

Please use the original box and packing materials for safe transportation of this
product.

It is normal for the cover and rear panel to become warm after the player has been
operating for an extended period of time.

Do not move this product during playback. Doing so may cause damage to the
pickup and the disc.

Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.
Do not push or touch the tray while it is opening or closing.

-5-

Features

Full compatibility with DVD, SVCD, VCD, CD, and Mp3 on CD-R & CD-RW (finalized)

Screen saver

Multiple playback modes: Memory, Program, Search, 10-Second Review

Dynamic spectrum display and 6 adjustable frequency bands

Optical and coaxial digital audio outputs

DOLBY DIGITAL DOWN MIX 2 channel output

S-video, composite video and component video outputs

Headphone output

Disc formats supported by this player:

Introduction

Digital Theatre System

Multi-angle

9

Dolby Digital

CC

Audio CDs

Video CDs

DVD video

R

RESTRICTED

This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by , and is intended
for home and other limited viewing uses only unless otherwise authorized by .
Reverse engineering or disassembly is prohibited.

Parental Lock

32

8

LB

16:9

Macrovision Corporation

Closed Caption

Subtitle choices

Audio choices

TV aspect ratio modes

Macrovision Corporation

Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.

c

1992-1997 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942,
5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. "DTS"
and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved.

-6-

Front panel and rear panel illustration

Front panel

Introduction

standby indicator

ON/OFF

headphone jack

power

Rear panel

PHONES

headphone volume control

disc tray

VFD(vacuum

fluorescent display)

open/close

OPEN/CLOSE

previous

pause

play

PAUSE

PREV

PLAY

STOP

NEXT

next

REV

stop

search

FWD

2 channel audio output

2 CHANNEL

DIGITAL OUT

COAXIAL

OPTICAL

AUDIO OUT

digital optical

output

coaxial

digital

output

component video output

composite

R

L

Y

C

B

C

R

VIDEO OUT

S-video

output

video

output

VIDEO

S-VIDEO

-7-

VFD Illustration

1 2

The figure above shows the front panel with all the displays on.

1 Play indicator

2 SVCD-VCD indicator

3 DVD indicator

4 PBC (playback control indicator)

5 MP3 indicator

6 Time/Chapter indicator

7 CD-VCD-SVCD indicator

8 Track/Title indicator

3 4

PBC

8

7

Graphically displays playback status.

Lights when a CD, VCD or SVCD disc is loaded.

Lights when a DVD disc is loaded.

Lights when a VCD or SVCD menu is displayed..

Lights when an MP3 disc is loaded.

Indicates the total playing time or chapter number when a DVD disc is

loaded.

Lights when a CD, VCD or SVCD disc is loaded and 6 indicates chapter

number.

Indicates the current track number (CD, VCD or SVCD) or title number

(DVD).

6

5

MP3

-8-

Remote Control

Introduction

STANDBY/ON

1

TITLE

2

OSD/SETUP

5

SLOW FWD

7

PREVIOUS/

8

REVERSE SCAN

NEXT/

9

FORWARD SCAN

PAUSE/STEP

12

13

NAVIGATION
ARROWS

STOP

15

ENTER

16

A-B REPEAT

18

PLAY MODE

20

EQUALIZER

22

STAND BY/ON

OSD/SETUP

SLOW FWD

PREV/REV

//

NEXT/FWD

//

PAUSE/STEP

STOP

PLAY MODE

EQUALIZER

TITLE

A-B

VOL/CH

ENTERENTER

MENU

CLEARCLEAR

MEMORY

OPEN/CLOSE

SEARCHSEARCH

PLAY

RETURN

ENHANCE

OPEN/CLOSE

4

MENU

3

0-9

6

SEARCH

11

CLEAR

10

PLAY/INSTANT

14

REPLAY

RETURN

17

MEMORY

19

ENHANCE

21

25

Not used

24

26

27

VOL/CH

ZOOM

ANGLE

ZOOM

ANGLE

SUBTITLE AUDIO

23

Not used

AUDIO

29

SUBTITLE

28

Note: Please note that reference numbers for the remote are described beginning on page 23 of this manual.

-9-

Connecting to a TV set

2 CHANNEL

R

Connections

VIDEO

Y

DIGITAL OUT

OPTICAL

AUDIO OUT

WHITERED

COAXIAL

L

Component video

C

B

C

R

S-VIDEO

VIDEO OUT

YELLOW

VIDEO IN

VIDEO

S-VIDEO

VIDEO IN

AUDIO IN

L

R

Notes:

There are three ways of connecting the player's AV output to the TV set:

1. S-video cord and audio cable.

2. Composite video cord and audio cable.

3. Component video cord and audio cable.

-10-

Connecting to an AV amplifier with
2 channel analog audio input

2 CHANNEL

R

VIDEO

Y

Connections

DIGITAL OUT

OPTICAL

WHITERED

COAXIAL

AUDIO OUT

L

C

B

C

R

S-VIDEO

VIDEO OUT

YELLOW

VIDEO IN

VIDEO

Receiver

POWER

PRO LOGIC

TEST

MODE

3 STEREO

BYPASS

MIC

MIC VOL

EXCITE

211

2

Notes:

1. Set the TV to the AV input connected to the DVD player.

2. Set the amplifier to the AV input connected to the DVD player..

-11-

CHANNEL

KARAOKE

L

£¨white£©

R

£¨red£©

INPUT SELECTOR

MUTE

BASS

DVD IN

MIC

DOWN UP

TREBLE

VOLUME

ECHO