DVP650 User's Manual
DVP650 User's Manual
DVD Player
TM
Content
Introduction
Safety Precautions
Important Safety Instructions
Caution
Features
Front Panel and Rear Panel Illustration
Remote Control
Connections
Connecting to a TV set
Connecting to an AV Receiver with 2 Channel Analog Audio Input
Connecting to an AV Receiver with Digital Audio Input
Basic Playback
Basic Operation
2
3
5
6
7
8
9
10
11
12
Advanced Features
Modes and Features Setup
Remote Control Operation
MP3 Playback
KODAK Picture CD playback
Other
Troubleshooting
Specifications
Remote Control Preparation
13
19
28
29
31
32
33
-1-
Safety Precautions
Introduction
CAUTION:
RISK OF ELECTRIC SHOCK
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
UNINSULATED "DANGEROUS VOLTAGE"
WITHIN THE UNIT'S CABINET THAT MAY
BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING
AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE MANUAL ACCOMPANYING THE UNIT.
WARNING:
CAUTION
DO NOT OPEN
THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR OUR SERVICE CENTER-SEE
"TROUBLESHOOTING".
TO PREVENT DIRECT EXPOSURE TO THE LASER
RADIATION, DO NOT OPEN THE CABINET. VISIBLE LASER MAY RADIATE WHEN THE CABINET
IS OPENED OR THE INTERLOCKS ARE DEFEATED. DO NOT STARE INTO THE LASER
BEAMS.
CAUTION:
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO
PLAYER IS HARMFUL TO THE EYES, DO NOT
ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER
ATTEMPT TO OPEN THE CABINET, DANGEROUS
HIGH VOLTAGES ARE PRESENT IN THE UNIT. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCKS, MATCH WIDEBLADE PLUG WITH WIDE SLOT AND FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED TO
WATER AND NO OBJECTS FILLED WITH LIQUIDS
SUCH AS VASES SHALL BE PLACED ON THE
APPARATUS.
WARNING:
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT EXPRESSLY APPROVED BY MAKER OR ITS AUTHORIZED PARTIES, COULD VOID USER'S AUTHORITY TO OPERATE THIS EQUIPMENT.
Remark
PLEASE WRITE DOWN THE MODEL NO. AND
SERIAL NO. PRINTED ON THE REAR PANEL.
Model No._________________
Serial No.___________________
-2-
Important Safety Instructions
Introduction
1. Read Instructions
All the safety and operating instructions should be
read before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool;
and the like.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer's
instructions, and should use a mounting accessory
recommended by the manufacturer.
9. Portable Cart Warning
A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
11. Power Sources
This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12. Grounding or Polarization
This product may be equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.
13. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the product.
14. Protective Attachment Plug
The product is equipped with an attachment plug
having overload protection. This is a safety feature.
See Instruction Manual for replacement or resetting
of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that
has the same overload protection as the original plug.
(Symbol provided by RETAC)
-3-
Important Safety Instructions
Introduction
15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable system
is grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding
of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure
below.
20. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
21. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A) When the power-supply cord or plug is
damaged,
B) If liquid has been spilled, or objects have fallen
into the product,
C) If the product has been exposed to rain or
water,
D) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation,
E) If the product has been dropped or damaged in
any way, and
F) When the product exhibits a distinct change in
performance this indicates a need for service.
16. Lightning
For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power lines surges.
17. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to
keep from touching such power lines or circuits as
contact with them might be fatal
.
18. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in
a risk of fire or electric shock.
19. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
22. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
23. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
24. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
25. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
-4-
Caution
Introduction
Please use the original box and packing materials for safe transportation of this
product.
It is normal for the cover and rear panel to become warm after the player has been
operating for an extended period of time.
Do not move this product during playback. Doing so may cause damage to the
pickup and the disc.
Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.
Do not push or touch the tray while it is opening or closing.
-5-
Features
Full compatibility with DVD, SVCD, VCD, CD, MP3 and Kodak Picture CD on CD-R & CD-RW (finalized)
Screensaver
Multiple playback modes: Program, Search, 10-Second Review
Dynamic spectrum display and 6 adjustable frequency bands
Coaxial digital audio output
Dolby Digital and DTS 2 Channel outputs
S-video, composite video and component video outputs
Introduction
Disc formats supported by this player:
Digital Theater System
Dolby Digital
MP3 files on CD-R/CD-RW
Multi-angle
9
KODAK picture CDs
CC
Audio CDs
32
DVD video
R
RESTRICTED
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by , and is intended
for home and other limited viewing uses only unless otherwise authorized by .
Reverse engineering or disassembly is prohibited.
Parental Lock
8
LB
16:9
Macrovision Corporation
Closed Caption
Subtitle choices
Audio choices
TV Aspect Ratio modes
Macrovision Corporation
The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
c
1992-1997 Dolby Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital
Theatre Systems, Inc.
-6-
Front Panel and Rear Panel Illustration
Front panel
Introduction
power
Rear panel
DVD CD MP3 PLAYER
power indicator
disc tray
open/close
stop
pause
play
DVP650
previous
next
component video output
2 channel audio output
R
L
C
B
C
R
digital
output
composite
video
output
Y
COAXIAL
AUDIOAUDIO VIDEO VIDEO
s-video
output
coaxial
VIDEO
S-VIDEO
-7-
Remote Control
Introduction
POWER
1
0-9 keys
3
4
VOL/CH
STOP
10
OK
11
NAVIGATION
12
ARROWS
PAUSE/STEP
13
TITLE
16
A-B
17
ZOOM
20
ANGLE
21
POWER
VOL/CH
STOP
PAUSE/
STEP
TITLE A-B
ZOOM ANGLE
EQUALIZER
SUBTITLE
OPEN/CLOSE
OSD/SETUP
SEARCH
CLEAR
FFREW
PLAY
MENU/
RETURN
PLAY MODE
AUDIO
OPEN/CLOSE
2
OSD/SETUP
5
SEARCH
6
CLEAR
7
NEXT/
8
FORWARD SCAN
PREVIOUS/
9
REVERSE SCAN
PLAY
14
MENU/RETURN
15
18
PLAY MODE
19
EQUALIZER
AUDIO
22
SUBTITLE
23
TM
Note:
1. Please note that reference numbers for the remote are described beginning on page 19 of this manual.
2. In this manual, " " " " " " " " will be used to represent different NAVIGATION ARROWS on the
remote respectively.
-8-
Connecting to a TV Set
Connections
R
L
C
B
C
R
Y
COAXIAL
AUDIOAUDIO VIDEO VIDEO
VIDEO
S-VIDEO
Composite video
WHITERED
Component video
YELLOW
VIDEO IN
VIDEO
VIDEO IN
AUDIO IN
L
R
Notes:
There are three ways of connecting the player's AV output to the TV set:
1. S-video cable and left/right audio cable [set the (Video Type) to (S-Video)].(See page 16)
2. Composite video cable and left/right audio cable.
3. Component video cable and left/right audio cable [set the (Video Type) to (YCbCr)].
S-VIDEO
-9-
Connecting to an AV Amplifier with
2 Channel Analog Audio Input
R
L
C
B
C
R
WHITERED
Y
COAXIAL
AUDIOAUDIO VIDEO VIDEO
YELLOW
Connections
VIDEO
S-VIDEO
VIDEO IN
VIDEO
Receiver
VOLUME
POWER
PRO LOGIC
CHANNEL
TEST
MODE
3 STEREO
BYPASS
EXCITE
MIC
MIC VOL
211
2
INPUTSELECTOR
MUTE
KARAOKE
DOWN
BASS
UP
ECHO
MIC
TREBLE
DVD IN
L
white
R
red
Notes:
1. Set the TV to the AV input connected to the DVD player.
2. Set the receiver to the AV input connected to the DVD player.
-10-
Connecting to an AV Amplifier
with Digital Audio Input
R
L
Coaxial cable
C
R
C
B
Y
COAXIAL
AUDIOAUDIO VIDEO VIDEO
Connections
YELLOW
VIDEO
S-VIDEO
VIDEO IN
VIDEO
Coaxial
Receiver
VOLUME
POWER
PRO LOGIC
CHANNEL
TEST
MODE
3 STEREO
BYPASS
MIC
MIC VOL
EXCITE
211
2
INPUTSELECTOR
MUTE
KARAOKE
DOWN
UP
BASS
ECHO
MIC
TREBLE
Notes:
1. Select the Coaxial digital audio output.
2. Set the player's audio out to Bitstream or PCM mode (see page 16).
3.
Set the receiver to the AV input connected to the DVD player.
-11-
Basic Operation
Preparation before playing:
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3.
Set the TV to the AV input connected to the DVD player.
4. Turn down the volume on your amplifier, and then power it on.
5.
Set the amplifier to the AV input connected to the DVD player.
Basic Playback
DVD CD MP3 PLAYER
DVP650
STEP 1 - Press POWER
to start the player. The
DVD logo appears on
the TV screen.
STEP 2 - Press OPEN/CLOSE either
on the front panel or remote control.
When the tray is open, place the disc
on the tray with the label side up.
Press OPEN/CLOSE again to close
the disc tray.
STEP 3 - Press the PLAY
button on the front panel or
remote control. The player
will automatically read and
identify the disc, and begin
playback.
-12-
Modes and Features Setup
ON SCREEN DISPLAY (OSD)/SETUP
ON SCREEN DISPLAY (OSD)/SETUP
5
5
In stop mode, press OSD/SETUP, and the TV screen will display the Setup Menu as follows:
Language Video Audio Rating Other
Press to change items
Setup Menu
A. Press OK to display each submenu
B. Press OSD/SETUP to exit the Setup Menu
Advanced Features
Language Setup
Select [Language] in the Setup Menu, and press OK to display [Language] submenu: the
Language Video Audio Rating Other
English
English
English
English
On
Press to
select the menu
item
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
Aor. Press OK to set
B. Press to go back one menu
C. Press MENU/RETURN to return to the Setup Menu
Select press OK to display submenu[Menu/OSD], and or the [Menu/OSD] :
Language Video Audio Rating Other
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
English
English
English
English
On
English
French
Spanish
Press to change your selection
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
-13-
Modes and Features Setup
Language Setup
Select [Subtitle], and press OK or to display the [Subtitle] submenu:
Language Video Audio Rating Other
Advanced Features
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
English
English
English
English
On
English
French
Spanish
Auto
Off
Press to change your selection
Note: Subtitle languages vary by disc.
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
Select [Audio],and press OK or to display the [Audio] submenu:
Language Video Audio Rating Other
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
English
English
English
English
On
English
French
Spanish
Press to change your selection
Note: Audio languages vary by disc.
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
Select [Disc Menu], and press OK or to display the [Disc Menu] submenu:
Language Video Audio Rating Other
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
English
English
English
English
On
English
French
Spanish
Press to change your selection
Note: Menu languages vary by disc.
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
Select [Auto OSD], and press OK or to display the [Auto OSD] submenu:
Language Video Audio Rating Other
Menu/OSD
Subtitle
Audio
Disc Menu
Auto OSD
English
English
English
English
On
On
Off
Press to change your selection
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
-14-
Modes and Features Setup
Video Setup
[Video] the [Video] sub :Select in the Setup Menu,and pr ess OK to display menu
Language Video Audio Rating Other
Press to
select the menu
item
TV Display
Video Out
A or set. Press OK to
B. Press MENU/RETURN or to return to the Setup Menu
Full Screen
S-Video
Advanced Features
Select [TV Display], and press OK or to display the [TV Display] submenu:
Language Video Audio Rating Other
TV Display
Video Out
A. Press OK to confirm B. Press OSD/SETUP to exit the Setup Menu
[Letterbox] - The full width of the picture is displayed on a standard 4:3
[Full Screen] - The full height of the picture is displayed on a standard 4:3
[Widescreen] - The picture fills the screen of a wide-screen (16:9) television.
Note: Not all DVDs offer movies in Full Screen format. If not, the disc will override your
TV Display setting and the movie will be displayed in Letterbox format.
Full Screen
S-Video
television, but black bars appear above and below the picture.
television, but some left/right detail is lost as the movie "pans and
scans" to keep the most important action on the screen.
Letterbox
Full Screen
Widescreen
Press to change your selection
-15-
Modes and Features Setup
Video Setup
Select [Video Out], and press OK or to display the [Video Out] submenu:
Language Video Audio Rating Other
Advanced Features
TV Display
Video Out
Full Screen
S-Video
S-Video
Y Cb C
r
Press to change your selection
A. Press OK to confirm B. Press OSD/SETUP to exit the Setup Menu
[S-Video]----S-video output
[YC
bCr
]----Component video output
Note: The Composite video output is always available.
Audio Setup
Select [Audio] in the Setup Menu, and press OK to display the [Audio] submenu:
Language Video Audio Rating Other
Press to
DTS Out
Digital Out
Analog
PCM
select the menu
item
A or set. Press OK to
B. Press MENU/RETURN or to return to the Setup Menu
[DTS Setting] [DTS Setting] :Select , and press ENTER or to display the submenu
Language Video Audio Rating Other
DTS Out
Digital Out
Analog
PCM
Analog
Digital
Press to change your selection
A. Press OK to confirm B. Press OSD/SETUP to exit the setup mode
Select , and press OK or to display the submenu[Digital Out] [Digital Out] :
Language Video Audio Rating Other
DTS Out
Digital Out
A. Press OK to confirm
Analog
PCM
PCM
Bitstream
Off
Press to change your selection
B. Press OSD/SETUP to exit the Setup Menu
-16-
Modes and Features Setup
Audio Setup
[PCM]----Digital audio output in PCM (pulse code modulation) format; use for stereo
or CD playback.
[Bitstream]----Digital audio out in original format; use if you connect to an A/V receiver
with a Dolby Digital or DTS decoder.
[Off]----No digital audio out.
Rating Setup
Select [Rating] in the Setup Menu, and press OK to display the [Rating] submenu:
Language Video Audio Rating Other
Advanced Features
Press to
select the menu
item
Use the 0-9 keys to input four digits, then press OK to confirm. The [Rating] submenu displays as follows:
Password
Rating
A. Press MENU/RETURN or to return to the Setup Menu
Note: Not all DVDs support Ratings.
Language Video Audio Rating Other
Password
Rating
Note: If you forget your password, please use the universal password (listed on the
last page of this manual) to unlock.
----
8. Adult
****
8. Adult
Unlocked
Locked
[Rating] to change [Rating] mode.Select , and press OK
Language Video Audio Rating Other
A. Press OK repeatedly to select: 1. Kid Safe,
2. G, 3. PG, 4. PG-13, 5. PG-R, 6. R, 7. NC-17, 8. Adult
B. RETURN the Setup Menu
Note: Unlock the password before setting [Rating].
Password
Rating
Press MENU/ to return to
----
8. Adult
-17-
Modes and Features Setup
Other Setup items
Select [Other] in the Setup Menu, and press OK to display the [Other] submenu:
Language Video Audio Rating Other
Advanced Features
On
On
Green
Press to
select the menu
Screen Saver
Auto Power Off
Background
item
A or set. Press OK to
B. Press MENU/RETURN or to return to the Setup Menu
[Screen Saver] ] :Select , and press OK or to display the [Screen Saver submenu
Language Video Audio Rating Other
Screen Saver
Auto Power Off
Background
On
On
Green
On
Off
Press to change your selection
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
[Auto Power Off] :Select , and press OK or to display the [Auto Power Off] submenu
Language Video Audio Rating Other
Screen Saver
Auto Power Off
Background
On
On
Green
On
Off
Press to change your selection
A. Press OK to confirm B. Press OSD/SETUP to exit the Setup Menu
Note: When Auto Power Off is set to on, this player will automatically power off
If it stop working for about 30 minutes.
[Background]Select , and press OK or to display the [Background] submenu:
Language Video Audio Rating Other
Screen Saver
Auto Power Off
Background
On
On
Green
Green
Blue
Grey
Yellow
Press to change your selection
A. Press OK to confirm
B. Press OSD/SETUP to exit the Setup Menu
-18-
Remote Control Operation
Advanced Features
POWER
1
OPEN/CLOSE
2
During playback, pressPOWER to stop the player and return to
standby mode.
While the player is in standby, press POWER or any key on the front
panel to resume normal operation.
To open the disc tray, press OPEN/CLOSE.
To close the disc tray, press OPEN/CLOSE again.
3
7
0-9 keys
These keys are used to input the time, as well as title, chapter and
track numbers.
When a numeric item is displayed on the screen, press the 0-9 keys to
select the desired entry, and press OK to confirm.
CLEAR
Press CLEAR to delete numbers you have entered.
Press once to delete one digit. Press and hold to delete all digits.
-19-
Remote Control Operation
VOL/CH
4
Press VOL/CH, and the [Channel/Volume] menu will display as follows:
Channel/Volume
Press to
select the menu
item
Select [Volume], the screen will display as follows:
Volume
Channel Mix
Advanced Features
Channel/Volume
Volume
Channel Mix
Press VOL/CH again to exit the menu.
[Channel] will followsSelect , the screen display as :
Channel/Volume
Volume
Channel Mix
Stereo
Left
Right
A. Press OK repeatedly to change the selection
B. Press VOL/CH again to exit the menu.
Press to adjust the volume
-20-
Remote Control Operation
OSD/SETUP
5
During playback, press OSD/SETUP to display the current time counter position.
Advanced Features
0:04:45
Elapsed time of the current track/chapter
Press OSD/SETUP again to display additional information about the playing disc.
Disc type
CD
VCD
Track
VCD
1/15
SVCD
0:04:45
Elapsed time of the current track
Total tracks
Current track
DVD
Disc type
Current title
Audio type
Subtitle
DVD
Title 1/10
Audio
Subtitle
Chapter 2/20 Angle 2/2
1 Eng
1 Eng
0:04:45
5.1Ch
Elapsed time of the current title
Angle
Current chapter
For CDs, press OSD/SETUP a third time to display the dynamic frequency spectrum.
Press it again to turn off the spectrum.
CD
Note:
Press STOP to access other modes.
-21-
Remote Control Operation
SEARCH
6
During playback, press SEARCH, and the [Track Search] menu will display as follows:
CD
VCD
SVCD
Advanced Features
Track Search
Time
DVD
Search
Time
Title
Chapter
-:--:--
-:--:--
--
--
0:28:08
0:28:08
Use the number keys to input the desired Time, Title or Chapter then press OK to confirm.
Press SEARCH again , the [Disc Search] menu will display as follows:
CD
Notes:.Time searches for an exact time in
the movie.
In Title/Chapter mode, you cannot
enter a value outside the range of the
total number of titles or chapters
For some DVD discs, the Search
function is unavailable.
Disc Search
Time
SVCD
VCD
Disc Search
Time
Track
-:--:--
-:--:--
--
0:28:08
0:28:08
Notes: During VCD and SVCD playback (with PBC off), press SEARCH twice
to display the [Disc Search] menu.
-22-
Remote Control Operation
Advanced Features
8
9
FF
REW
During DVD, CD or VCD playback, press FF once to play
These keys are used to input the time, as well as title, chapter and
track numbers.
the next chapter, title or track.
During DVD, CD or VCD playback, press and hold FF to
When a numeric item is displayed on the screen, press the 0-9 keys to
select the desired entry, and press ENTER to confirm.
scan forward. The player will cue the disc at 2, 4, 8 and 20 times
normal speed as follows:
When a CD or VCD is playing (with PBC off), press the 0-9 keys to
Select a track directly, then press ENTER to confirm.
Press PLAY to resume normal playback.
During DVD, CD or VCD playback, press REW once to play the previous
chapter, title or track.
During DVD, CD or VCD playback, press and hold REW to scan in
reverse. The player will review the disc at 2, 4, 8 and 20 times normal
speed as follows:
Press PLAY to resume normal playback.
X2 X4 X8 X20X2 X4 X8 X20
STOP
10
PAUSE/STEP
13
Press STOP once during playback to stop and hold playback.
Press PLAY to resume playback from the point you pressed
Press STOP twice to stop playback completely.
Note: T f playback is stopped
about 5 minutes(when Screen Saver is set to on).
he screen saver will automatically turn on i
During DVD, CD or VCD playback, press NEXT/FWD once to play
the previous chapter, title or track.
During DVD, CD or VCD playback, press and hold NEXT/FWD to
Press during playback to pause playback.
scan forward. The player will cue the disc at 2, 4, 8 and 20 times
normal speed as follows:
Note: The step function is not available during CD playback.
PAUSE/STEP
Press again to step forward one frame.
PAUSE/STEP
Press PLAY to resume normal playback.
Press PLAY to resume normal playback.
STOP.
-23-
Remote Control Operation
PLAY
14
Press PLAY from stop mode to start playback.
Press PLAY during playback to replay the last 10 seconds. This
function is not available if the elapsed time of current track is
less than 10 seconds.
Note: MP3 discs and some DVD discs do not have a 10 second review feature.
Advanced Features
MENU/RETURN
15
TITLE
16
During DVD, VCD or SVCD playback (with PBC on), press MENU/RETURN
to return to the program menu.
In the Setup Menu, press MENU/RETURN to return to the main menu
or stop mode.
Any time, press MENU/RETURN to cancels the current OSD or some menus
Note: This function is subject to the disc.
During DVD playback, press TITLE to display the DVD title menu or
play the first title.
Note: This function is subject to the disc.
17
A-B
Note: 1. During CD/VCD/SVCD playback, points A and B must be within the same track.
During playback, press A-B to select A.
Press it again to select B. The player will repeat the section from A to B
automatically.
Press A-B a third time to cancel A-B repeat and clear points A and B.
During DVD playback, points A and B can be selected from different chapters.
2. This function is subject to the disc.
point
point
-24-
Remote Control Operation
PLAY MODE
18
Press PLAY MODE to display the [ lay ode] menu:P M
VCD
SVCD
DVD
Advanced Features
CD
Play Mode
Repeat
Program
PBC
Off
Off
On
Press to select the menu item
Select [Repeat], and press OK or to display the [Repeat] submenu:
CD
SVCD
VCD
Play Mode
Repeat
Program
PBC
Off
Off
On
Off
Single
All
Press to change your selection
A. Press OK to confirm
B. Press PLAY MODE or MENU/RETURN to exit the menu
Note: PBC (Playback Control used to navigate VCDs) is not available for CDs.
Play Mode
Repeat
Program
DVD
Play Mode
Repeat
Program
Off
Off
Off
Off
Off
Chapter
Title
S Program , [Program] :elect [ ] and press OK or to display the submenu
VCD
SVCD
Play Mode
Repeat
Program
PBC
Off
On
On
Off
On
Press to change your selection
A. Press OK to confirm
B. Press PLAY MODE or MENU/RETURN to exit the menu
-25-
CD
DVD
Play Mode
Repeat
Program
Off
On
Off
On
Remote Control Operation
While [Program] is on, press OK to display the [Program] submenu:
CD
VCD
SVCD
Advanced Features
Play Mode
1 _ _
_ _
2
3 _ _
<<
DVD
4 _ _
5 _ _
6 _ _
7 _ _
8 _ _
9 _ _
Clear All
10 _ _
11 _ _
12 _ _
Play
Input the track numbers in the order you would like them to
play. When finished, select [Play] and then press OK to
play the tracks in the new programmed order.
Select [Clear All] and press OK to clear all the numbers you
have input.
Select [<<] and press OK to return to the [Play Mode] menu.
Input the title number and the chapter number in the desired
Play Mode
1 _ _:_ _
2 _ _:_ _
3 _ _:_ _
<<
4 _ _:_ _
5 _ _:_ _
6 _ _:_ _
Clear All
7 _ _:_ _
8 _ _:_ _
9 _ _:_ _
10 _ _:_ _
11 _ _:_ _
12 _ _:_ _
Play
order. Then select [Play] and press OK to play the chapters
in the order you have set.
Select [Clear All] and press OK to clear all the numbers you
have input.
Select [<<] and press OK to return to the [Play Mode] menu.
Select [PBC], and press OK or to display the [PBC] submenu:
( PBC, or playback control, provides advanced track selection options during VCD playback.)
EQUALIZER
19
SVCD
VCD
Play Mode
Repeat
Program
PBC
Off
Off
On
Off
On
A. Pr
B
ess OK to confirm
. Press PLAY MODE or MENU/RETURN to exit the menu
The EQUALIZER allows you to adjust 6 frequency bands independently.
CD
Graphic Equalizer
Aor. Press to select the desired frequency band.
B. Press to adjust the level for each frequency.
- ----------------
Note: EQUALIZER will lower volume when setting are
changed from default volume.
EQUALIZER is not available for DVD, MP3, VCD
or SVCD playback.
-26-
Remote Control Operation
ZOOM
20
ANGLE
21
During VCD/SVCD/DVD playback, press ZOOM to magnify the image
as follows:
During DVD playback
Press ANGLE to view scenes from different camera angles.
Press ANGLE repeatedly to change from one camera angle to another.
Note: This function is disc specific.
Advanced Features
Q1 Q2 Q3
Q Off
AUDIO
22
SUBTITLE
23
During DVD playback
Press AUDIO repeatedly to select from up to 8 audio languages/formats.
During SVCD playback
Press AUDIO repeatedly to select from up to 4 audio languages/formats.
Note: This function is disc specific.
During DVD playback
Press SUBTITLE repeatedly to select from up to 32 subtitle languages.
Note: This function is .disc specific (languages will vary)
-27-
MP3 Playback
Advanced Features
Supported formats
Disc format: ISO 9660, Joliet
Music file formats: Mp3
MP3 bit rate (data rate): 32-192kbps
Total number of music files and albums: around 350 per disc
Sampling rate: (CBR) 32kHz/44.1kHz/48kHz/64kHz;
Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported,
scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalized, or a dirty pickup.
badly
When an MP3 disc is loaded, the screen will display as follows:
(VBR) 16kHz/22kHz/24kHz/32kHz (MPEG )
Total tracks
Directory
Directory window
Elapsed time of
the current track
Current track
File name
File window
D-1
D-2
D-3
D-4
D-5
Stop
Play
056/140
056/140
0:00:01
F-1
F-2
F-3
F-4
F-5
0:00:01
MP3
Press to select the directory.
Press PLAY to play the first file in the directory selected by the cursor in the
directory window. The cursor will automatically move to the file playing in the file window.
Note: The player supports English directory and file names only. Other languages will
display as "Dir-X" for the directory name.
MP3
D-1
D-2
D-3
D-4
D-5
Press to select the file when the cursor appears in the file window.
Press PLAY to play the current file selected by the cursor.
Press to switch between the directory window and the file window.
Note: During MP3 playback, Forward Scan and Reverse Scan are not available.
F-1
F-2
F-3
F-4
F-5
-28-
Kodak Picture CD Playback
Advanced Features
The introduction of KODAK Picture CD
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking
the box on the photofinishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS)
color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign. When your
order is returned, you receive your prints, negatives, and your full roll of pictures safely stored on your KODAK
Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on your
computer. You also can record the JPEG picture into CD-R or CD-RW with the CD-Rewriter yourself.
Note: 1. The Max. Size of JPEG Picture can be supported: 3840X3840 pels
2. JPEG stands for Joint Picture Experts Group. It is the first International Standard on Still Picture
Compressing: ISO 10918-1, constituted by the Committee on Still Picture Compressing Standard of ISO.
The pictures on KODAK Picture CD are stored in this format (JPEG). This player can decode the JPEG
pictures in KODAK Picture CD and playback the pictures in different modes.
Now, you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the
comfort of your living room.
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak
Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
This player provides 7 different slideshow transition modes, you can usePLAY MODE on Remote Control
Unit to select the modes during playing:
--no special transition effect (by default)
--wipe from top to bottom
--wipe from bottom to top
--wipe from top/bottom to center
--wipe from center to top/bottom
--vertical blind
--horizontal blind
General function:
You can set slideshow transition modes for any pictures.
Press the PAUSE/STEP to stop playing.
Press the REW or FF to see the previous or next picture.
Press the PLAY to continue slideshow transitions.
Image Rotation
There are four modes to rotate a picture: Invert, Mirror, Left, and Right. These operations are
allowed only when a picture is being displayed normally and will be cancelled automatically
when a new picture is displayed. The arrow keys are used to select the different rotation modes:
Press --Invert/Normal OSD display
Press --Mirror/Normal OSD display ,press it again to resume normal.
Press --Turn left OSD display ,press it again to resume normal.
Press --Turn right OSD display ,press it again to resume normal.
-29-
Kodak Picture CD Playback
Zoom Function:
This player provides both Zoom in/out and Zoom pan function. Press the ZOOM
consecutively, the picture will zoom in/out in turn as followings:
Note: During the ZOOM function, slideshow transitions and image rotation are disabled.
Q off: close zoom, pressPLAY
Q1, Q2, Q3: zoom in; Q4, Q5: zoom out
Digest function
Advanced Features
again to resume slideshow transition mode.
Press the MENU/RETURN to enable the function. The television screen can
display up to 12 pictures at a pro ratio.
Press Direction key to select any picture displayed on the screen, then press PLAY,
the selected picture will zoom in and start slideshow transition.
the quality of the picture displaying on your screen is mostly subjected to your
Note:
display equipment.
Time slot between slides presetting
In playback mode, press the SEARCH to open the function menu.
Press use the keys to adjust the time slot, there will display the time slot on the
top-right corner of the menu.
Press the SEARCH again to close this function.
-30-
Troubleshooting
If you have any questions, please consult the troubleshooting guide below. If you cannot solve the problem, please contact
our customer support department at
480-922-0896 or via e-mail at customersupport@sonicblue.com.
Other
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is operational.
Ensure the power cord is not damaged.
Ensure the power plug is connected firmly to the outlet.
PICTURE BUT NO SOUND
Ensure the audio jacks are securely connected.
Ensure the audio connector is not damaged.
Ensure the volume is turned up in VOL/CH setup.
Ensure you have set the player's AUDIO settings correctly.
Ensure you have selected the correct AV input for your TV.
Ensure the audio is not set to mute.
SOUND BUT NO PICTURE
Ensure the video jacks are securely connected.
Ensure you have selected the correct AV input for your TV.
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO settings correctly.
"BAD DISC" DISPLAYED
Ensure the disc is not warped, damaged or deformed.
Ensure the disc is not badly stained or damaged.
Ensure the disc format is compatible with the player.
Please check whether you tried to play a software CD.
If so, please restart the player.
REMOTE NOT WORKING
Ensure the remote batteries are working.
Point the remote control directly at the player's IR
sensor.
Remove any obstacles between the remote and the IR
sensor.
UNIT NOT WORKING
Turn off the power, and then turn it on again.
POOR PICTURE OR SOUND
Ensure you have set the player's AUDIO settings correctly.
Ensure the disc is not scratched or stained.
Ensure the AV connector or the output terminal is not
damaged.
"NO DISC" DISPLAYED
Ensure you have put the disc on the tray.
Ensure the disc is not upside down.
Ensure the disc is not distorted, stained or
scratched.
-31-
Specifications
Power requirements: 110-240V, 50/60Hz
Power consumption: 25W
Video standard: NTSC
Unit Weight: 6.4 Lbs (2.9kg)
Unit Dimensions: 16.5in(W) x 12.0in(D) x 2.2in(H) (product),(418mm(W) x 305mm(D) x 55mm(H))
Video out
Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin Jack x 1
S-video output connector(separate Y C signal output connector):
Y output: 1.0V(p-p)/ 75 , sync, negative polarity
C output: 0.286 V(p-p)/75
4 pin mini DIN x 1
Audio out
Analog out: 1.85V(rms)/10k , RCA pin Jack(L,R) x 1
Coaxial out: 0.5V(p-p)/75 , RCA pin Jack x 1
Other
Frequency response: 20Hz to 20kHz
S/N ratio: >90dB
Total harmonic distortion: < 0.05%
[Accessories]
Audio/Video cable 1
Remote Control 1
Batteries(AAA) 2
Specifications are subject to change without notice.
Weight and dimensions are approximate.
-32-
Remote Control Preparation
Other
Insert batteries
1
2
Make sure to match the "+" and "-" of the batteries with
the marks inside the battery compartment.
3
1. Open the cover.
2. Insert batteries.
3. Close the cover.
Using the remote control
Point the remote control at the remote sensor.
(The pictures below are for reference only.)
DVD CD MP3 PLAYER
o
30
30
DVP650
o
Notes:
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow
the instructions below:
Do not insert the batteries in the wrong direction.
Do not charge, heat, open, or short-circuit the
batteries.
Do not throw batteries into a fire.
Do not leave dead batteries in the Remote Control.
Do not use different types of batteries together, or mix
old and new batteries.
If you do not use the remote control for a long
period of time, remove the batteries to avoid
possible damage from battery corrosion.
If the remote control does not function correctly or
the operating range becomes reduced, replace all
batteries with new ones.
If battery leakage occurs, clean the battery
compartment, then insert new ones.
Remarks: Do not expose the remote sensor of the DVD
Player to a strong light source, such as direct sunlight.
Notes:
Point the remote control directly at the player's remote
sensor.
Do not leave the remote control in an extremely hot or
humid place.
Do not spill water or put anything wet on the remote
control.
Battery life is ~1 year under normal conditions.
-33-
POWER
1
OPEN/CLOSE
2
OSD/SETUP
5
4
10
11
12
13
16
17
20
21
3
SEARCH
6
CLEAR
7
VOL/CH
FFREW
8
9
STOP
PLAY
14
PAUSE/
STEP
TITLE A-B
EQUALIZER
MENU/
RETURN
PLAY MODE
15
Warning
18
ZOOM ANGLE
SUBTITLE
AUDIO
19
22
23
TM
To prevent children from watching inappropriate content on
this player, please be sure to set the rating in the Setup menu.
Before you set this rating, the password must be unlocked. If
you forget your unique password, please use the universal
password as set by the manufacturer ("0106"). Please detach
this sheet and keep it in a safe place away from children.
Loading...