Govideo DPT100 User Manual
Quick Reference
Basic Setup & Operations
DPT100 TV TUNER
About the DPT100
The DPT100 converts your DP7040 or DP8440 DVD
player into a portable television. The tuner connects
to the side of the DVD player and is powered by the
player, so no additional power source is required. Use
the supplied antenna to receive local TV broadcasts
while you’re on the go. Or for improved reception, use
the RF adapter to connect to your home’s cable TV
source or a rooftop antenna.
Connecting the Tuner
Connect the TV tuner to the DVD player as follows:
Align the tuner with the edge of the DVD player
Connect the TV tuner to the player as described
Connect the antenna to
jack with the sides of the
You are now ready to
1
2
3
Video Output connector:
Antenna
Antenna
Tuner
RF Adapter
Connect the TV tuner to the player as described
Connect the RF adapter to the EXT. ANT port on
Connect the RF cable from your cable TV wall
You are now ready to search for channels.
©2004. GoVideo. All rights reserved.
You can fi ne tune individual channels to improve
Press
until “Tuner” appears in the upper left
While in Tuner mode, press
Press the
/
want to fi ne tune.
Use the
/
Use the
/
Adding or Removing Channels
After Auto Search has stored all available channels,
Press
until “Tuner” appears in the upper left
While in Tuner mode, press
Use the
/
want to add or remove from the list.
Use the
/
Press
to toggle the “Favorite” setting between
Connect the TV tuner to the DVD player.
Connect the antenna or RF adapter to the TV
Turn the DVD player on.
Press
until “Tuner” appears in the upper left
While in Tuner mode, press
to
While in Tuner mode, press
Use the
/
Auto Search
Press
Press
to exit the Tuner Setup
/
/
Auto search
Auto search
Auto search
Auto search
Loading...