Govideo DP8240 User Manual

Quick Reference
Basic Setup & Operations
DP8240
Welcome
Congratulations on your purchase of this GoVideo offroad portable DVD player. This Quick Reference Guide will help you get started using the player. Before you begin, make sure the following accessories are included with your unit:
• Rechargeable NiMH Battery Pack
• Universal AC/DC Power Adapter
• Cigarette Lighter Adapter
• Remote Control with 3V Battery
• Audio Cable
• Video Cable
• User’s Guide
To order replacement parts or other accessories, please contact the GoVideo Parts department at:
• 800-736-7679, option 8
• or via e-mail at:
parts@govideo.com
Step 1 - Open Top Panel
Lift the top panel and adjust the LCD screen to the desired angle.
Step 2 - Connect AC Adapter
Connect the supplied AC adapter to the DC IN jack on the left side of the portable DVD player.
• You can also use the supplied cigarette lighter adapter in place of the AC adapter to supply power to the player.
Step 3 - Turn on Power
Slide the POWER button to the ON position to turn on the player.
Step 4 - Open Disc Cover
Press the OPEN button to open the disc cover.
Step 5 - Insert Disc
Place the disc in the center of the tray with the label side facing up. Gently press the hole in the disc over the spindle in the center of the tray.
Step 6 - Close Disc Cover
Press down on the disc cover until it snaps shut.
• The disc will load automatically.
Step 7 - Play Disc
Press the PLAY/ SELECT button to start playback of the disc.
• If a DVD disc menu appears, use the
/// keys to select the desired option
and press PLAY/ SELECT to confirm.
Open
Using the Battery Pack
Battery Pack Overview
DC In Jack
4
21 3
1 DC In Jack
2 Battery Release Button
3 Battery Charge Indicator
4 Battery Connectors
Charging the Battery Pack
Before using the battery pack, make sure it is fully charged. You can charge the battery pack directly or while it is attached to the portable DVD player.
Charging the Battery Pack Directly 1 Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC IN jack on the left side of the battery pack.
• You can also use the supplied cigarette lighter adapter in place of the AC adapter to charge the battery.
Charging the Battery Pack While it is Attached to the Player 1 Connect the battery pack to the back of the player
as shown.
2 Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC In jack on the right side of the player.
3 Turn off the player. The battery pack will NOT
charge while the portable DVD player is powered on.
4 The battery charge indicator will turn red while the
battery is charging.
5 The battery charge indicator will turn green when
the battery pack is fully charged.
Removing the Battery Pack
• Press the Battery Release button on top of the battery pack to remove it.
CAUTION
• Use the specified battery pack only.
• May explode if battery pack is incorrectly replaced or disposed of in fire. Replace only with the same or equivalent type.
• Do not short circuit.
• Do not place the battery pack in direct sunlight or in excessively hot places (over 140°F (60°C) such as the dashboard of cars.
• Use only with the specified power adapter (12VDC, 1.25A).
2 The battery charge indicator will turn red while the
battery is charging.
3 The battery charge indicator will turn green when
the battery pack is fully charged.
• Allow ~3 hours to fully charge the battery.
• A fully charged battery permits ~3 hours of playback time.
©2004. GoVideo. All rights reserved.
82-154-00490
Loading...