Govideo DP5040, DP6040 User Manual
Quick Reference
Basic Setup & Operations
DP5040-DP6040
Welcome
Congratulations on your purchase of this GoVideo
portable DVD player. This Quick Reference Guide
will help you set up and start using the player as
quickly as possible.
Before you begin, please check to make sure
the following accessories are included with your
portable DVD player:
• Rechargeable NiMH Battery Pack
• Universal AC/DC Power Adapter
• Cigarette Lighter Adapter
• Remote Control with 3V Battery
• Audio Cable
• Video Cable
• User’s Guide
Step 3 - Turn on Power
Slide the Power button to the On position to turn on
the player.
Step 1 - Connect AC Adapter
Connect the supplied AC adapter to the DC IN jack on
the right side of the portable DVD player.
• You can also use the supplied cigarette lighter
adapter in place of the AC adapter to supply
power to the player.
Step 2 - Open Top Panel
Slide the Open latch on the front of the player to
release the top panel and adjust the LCD screen to
the desired angle.
Step 4 - Open Disc Cover
Press the Open button to open the disc cover.
Step 5 - Insert Disc
Place the disc in the center
of the tray with the label side
facing up.
• Press the disk onto the
spindle in the center of the
tray.
Step 6 - Close Disc Cover
Press down on the disc cover until it snaps shut.
• The disc will load automatically.
Step 7 - Play Disc
Press the /Select button to start playback of the
disc.
• If a DVD disc menu appears, use the
/// keys to select the desired option
and press /Select to confirm.
Using the Battery Pack
DC In Jack
4
21 3
Battery Pack Overview
1 DC In Jack
2 Battery Release Button
3 Battery Charge Indicator
4 Battery Connectors
Charging the Battery Pack
Before using the battery pack, make sure it is fully
charged. You can charge the battery pack directly or
while it is attached to the portable DVD player.
Charging the Battery Pack Directly
1 Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC IN jack
on the left side of the battery pack.
• You can also use the supplied cigarette lighter
adapter in place of the AC adapter to charge
the battery.
Charging the Battery Pack While it is
Attached to the Player
1 Connect the battery pack to the back of the player
as shown.
2 Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC In jack
on the right side of the player.
3 Turn off the player. The battery pack will NOT
charge while the portable DVD player is powered
on.
4 The battery charge indicator will turn red while the
battery is charging.
5 The battery charge indicator will turn green when
the battery pack is fully charged.
2 The battery charge indicator will turn red while the
battery is charging.
3 The battery charge indicator will turn green when
the battery pack is fully charged.
• Allow ~3 hours to fully charge the battery.
• A fully charged battery permits ~3 hours of
playback time.
©2004. GoVideo. All rights reserved.
Removing the Battery Pack
• Press the Battery Release button on top of the
battery pack to remove it.
CAUTION
• Use the specified battery pack only.
• May explode if battery pack is incorrectly
replaced or disposed of in fire. Replace
only with the same or equivalent type.
• Do not short circuit.
• Do not place the battery pack in direct
sunlight or in excessively hot places (over
140°F (60°C) such as the dashboard of
cars.
• Use only with the specified power
adapter (12VDC, 1.25A).
Loading...