GOTTOMIX AMP4 Owner's Manual

AMP4

Headphone Amplifier

Introductions

Most home recordings involve from one to four people, any or all of whom are

TM

going to need headphone monitoring capability. The GOTTOMIX AMP4
Headphone Amplifier can be used for band rehearsals and even home
entertainment, which provides amplification and individual volume control for
up to 4 headsets and can be driven by either line-level or headphone amp
signals, stereo or mono.

TM

Congratulations on your purchasing of GOTTOMIX AMP4 Headphone
Amplifier.

Please take a few moments to read the entire manual, and be sure to retain
this document for future reference. Please read and observe all safety
instructions detailed on each page.

Front Panel

1. Power: This push button with LED indicator is used to switch on/off the

AMP4. When it is pressed, the AMP4 is switched on, the LED will illuminate,
when it is released, the AMP4 is switched off, the LED will light off.

2. VOL 1: This knob is used to adjust the volume of Output 1. Turn it clockwise
to increase the volume of Output 1, turn it counterclockwise to decrease the
volume of Output 1.

3. VOL 2: This knob is used to adjust the volume of Output 2. Turn it clockwise
to increase the volume of Output 2, turn it counterclockwise to decrease the
volume of Output 2.

4. VOL 3: This knob is used to adjust the volume of Output 3. Turn it clockwise
to increase the volume of Output 3, turn it counterclockwise to decrease the
volume of Output 3.

5. VOL 4: This knob is used to adjust the volume of Output 4. Turn it clockwise
to increase the volume of Output 4, turn it counterclockwise to decrease the
volume of Output 4.

1 2

3

4

5

1