Gotharman Anamono X Update Manual

Gotharman’s anAmoNo X

Modular Synthesizer

Update Manual v6.16

Compability with VCF8 Dual Band SSI Filter

Import Multiple Samplings From Directory As one sampling with Chop
points function

Sample slot select via keyboard splits

Sample playback and chop engine has been optimized

Filter Boost parameter

Controller tracks outputs MIDI CC 1 to 127

Text made more light on some pages

Delete samples/presets progress shown on LED’s

Bug Fixes

Compability with the new VCF8 –Dual Band SSI Filter

After installing this update, it is possible to select the VCF8, Dual Band SSI Filter, in

the filter settings menu, and the parameters of this filter will be shown on the

analog filter pages.

This filter has four analog 24dB resonant filters, two that are switchable between HPF

and LPF modes and two that are always in LPF mode. This gives four resonant peaks
in total, and makes this filter ideal for formant sounds. It is also great for bass sounds
and a lot of other sounds. It is based on a bunch of the new great SSI2144 filter chip.

It is organized as two chains of HPF/LPF + LPF in series. The two chains can be
connected in parallel or serial to each other, and they output to each of their filter
output.

After you have installed this filter, you must set it up in the menu's, in order to make
it work properly.

Go to "More..>Common>Filter Settings", and set either filter 1 or 2 to: 8-Dual Band
SSI, depending on in which filter slot you installed it:

Parameters:

HpCut: HPF/LPF 1 and 2 filter cutoff frequency. Space between the 2 filters can be
adjusted with Space.

LpCut: LPF 1 and 2 filter cutoff frequency. Space between the 2 filters can be
adjusted with Space.

Reso: Filter resonance of all 4 filters.

Space: Space between the cutoff frequencies of the two filter chains.

HPF2: HPF2 filter mode HPF or LPF.

HPF1: HPF1 filter mode HPF or LPF.

Conn: Connection of the 2 filter chains. Ser (serial) or Par (parallel).

Out1/2: Mix between filter output 1 (HPF/LPF + LPF chain 1) and filter output 2

(HPF/LPF + LPF chain 2).