A+ Capabl e options indi cated
by this color background.
EXAMPLE: ICO4ADJ 35/15 AR T00 LSS 35D 277 EZ1
Design2Ship Quick Ship Program: Options in green text qualify
for Design2Ship — 5 business days from order entry to ship. Refer
to Design2Ship Brochure for complete program details. Maximum
White Painted Flange
Black Painted Flange
Chicago Plenum
RELOC® Ready Luminaire connectors
enable a simple and consistent
factory installed option across all ABL
luminaire brands. Available only with
RRLA, RRLB, RRLAE, and RRLC12S.
Refer to RRL spec sheet on www.
acuitybrands.com for RELOC® product
specifications. Above ceiling access
required.
ACCESSORIES —order as separate catalog numbers (shipped separately)
OPTC4 XXDAdditional optics for field installation. Replace "XX" with beam angle.
ORDERING NOTES
1. Not Available with Finishes.
2. Only available 1500lm and below.
3. Not available with ELR emergency option.
4. Supplied with factory installed step down transformer.
5. Includes terminator resistor.
6. Not Available with Control Interfaces.
7. Must specify 120 or 277.
8. For use with generator supply EM power. Will require an emergency hot feed
and normal hot feed.
9. For use with different reflector finish only (i.e. AR, PR, WTR, GR options). Not available with WR (White Reflector).
10. For use with different reflector finish only (i.e. AR, PR, WTR, GR options). Not available with BR (Black Reflector).
11. Only available up to 4500 lumens. Specify 120 or 277.
incito
SPECIFICATIONS
Optical and Trim Assembly
Fully serviceable and upgradeable lensed LED light engine suitable for field maintenance or service from above or below the ceiling.
Optical design is a Bounding Ray™ design with 45° cutoff to source and source image. Top down flash characteristic for superior glare control.
Vertical tilt is self-locking from 0° - 40° with indicator arrow and gauge, engages with a manual tilt locking screw for added aiming assurance. Cut cones enable
optimal efficacies while also occluding the inside of the fixture.
365° of horizontal rotation enabled through self-lubricating polymer which never binds or deforms. Cam lock locks rotation to ensure integrity of design
throughout lifetime of luminaire.
™
4"
High Center Beam Round Recessed Adjustable
Electrical
The luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. Support 347V via fixture-mounted stepdown
transformer. The fluctuations of line voltage shall have no visible effect on the luminous output.
The luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.
Sound Rated A+. Driver shall be >80% efficient at full load across all input voltages.
Input wires shall be 18AWG, 300V minimum solid copper.
Controls
Luminaire shall be equipped with interface for nLight wired or nLight AIR networks with integral power supply as per specification.
Emergency
Luminaires supplied with a battery pack comply with NFPA 101 (Life Safety code) and deliver constant light output throughout the 90 minutes of code required emergency operation period when there is a normal AC power loss with remote test switch available.
Dimming
The luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI/IES RP-16-10) over a range
of 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.
eldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing
which demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.
Driver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.
Construction
Light engine and driver are accessible from above or below ceiling.
16-gauge black painted steel mounting frame with mounting bars included.
Post-installation adjustment possible from above or below ceiling.
Galvanized steel junction box with hinged access covers and spring latch. Three combination 1/2"-3/4" and one 1/2" knockout for straight-through conduit runs.
Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
Accommodates up to 5/8"-thick ceilings.
Listings
Fixtures are CSA Certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of
the “Standards for Safety” to UL, damp location listed.
Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, with the results reviewed by an independent, accredited
certification organization. Visit www.energystar.gov for specific configurations listed.
IC-rated up to 1500 lumens.
Buy American
This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FARS, DFARS and DOT. Please refer to
www.acuitybrands.com/buy-american for additional information.
Photometrics
LEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the
minimum operational life of 60,000 hours.
Color appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 6,000 hours and operate within a tolerance of <2.5 MacAdam ellipse as defined by the center of the quadrangles defined in ANSI C78.377-2015.
Warranty
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note:
Actual performance may differ as a result of end user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight
• This luminaire is part of an A+ Certified solution for nLight
options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
nLight® AIR is the ideal solution for retrofit or new construction spaces where
adding communication wiring is cost prohibitive. The integrated nLight AIR
rPP20 Power Pack is part of each EVO Luminaire ordered with the NLTAIR option.
These individually addressable controls offer the ultimate in flexibility during
initial setup and for space repurposing.
nLight® AIR Control Accessories
Order as separate catalog number. Visit nLight AIR.
Wall Switches
On/Off single pole
On/Off two pole
On/Off & raise/lower single pole
On/Off & raise/lower two pole
®
AIR Control Accessories (cont.)
nLight
Occupancy Sensors (PIR/dual tech)
Small motion 360
Large motion 360
o
, ceiling
o
, ceiling
Model Number
rPODB (color) G2
rPODB 2P (color) G2
rPODB DX (color) G2
rPODB 2P DX (color) G2
Model Number
rCMS 9 / rCMS PDT 9
rCMS 10 / rCMS PDT 10
Possibilites for nLight
®
AIR
Fixtures ordered without the NLTAIR option
Fixtures ordered with the NLTAIR option
CLAIRITYTM Pro
Mobile App
CLAIRITYTM Pro
Mobile App
+24v DC AuxLine Power
rPODBrCMS
(ordered as an accessory)
rPODB
Wiring Key
rPP20
Low Voltage
Dimming Wires
®
Wired The nLight® solution is a digital networked lighting control
nLight
system that provides both energy savings and increased user configurability
by cost effectively integrating time-based, daylight-based, sensor-based and
manual lighting control schemes.