GOTHAM Bounding Ray User Manual

Download

Multiple Layers of Light

Luminaire Type:

Catalog Number:

Buy American

General Illumination Open Wallwash

OVERVIEW COMPLIMENTARY PRODUCTS

Feature Set

• Bounding Ray™ optical design

• Unitized optics mechanically attach the light

engine to the lower reﬂector for complete optical alignment.

• 45° cutoff to source and source image

• Fully serviceable and upgradeable lensed LED

light engine

• 70% lumen maintenance at 60,000 hours

Distribution

wallwash

Superior Perfomance

Nominal

Lumens

Delivered

Lumens

Wattage 31.6 41.1 47.1

Efﬁcacy 72.5 72 72.2

2000 2500 3000

2,287 2,964 3,398

• 2.5 SDCM; 85 CRI typical, 90+ CRI optional

• Fixtures are wet location, covered ceiling

• Available with 10% dimming, 1% dimming, or

dim to dark

• Wallwash enables uniformity from ﬂoor to

ceiling.

Coordinated Apertures | Multiple Layers of Light

General Illumination Layer | EVO High Center Beam Layer | Incito

Core

Healthcare

Downlight Adjustable Open

MRI Surgical

Special

Applications

Dynamic Food Ser vice Vandal/Tamper Cle an Room Shower Steam Ro om

Suite

Wallwash

Patient Room

Lensed

Wallwash

EVO + Incito — Multiple Layers of Light

Cylinder Pinhole Bevel Hyperbolic

EVO8WW page 1 of 6

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers, GA 30012 | P 800-705-SERV (7378) | gothamlighting.com © 2014-2021 Acuity Brands Lighting Inc. All Rights Reserved. Rev. 04/26/21 Specifications subject to change without notice.

General Illumination Open Wallwash

ORDERING INFORMATION

A+ Capabl e options indi cated by this color background.

EXAMPLE: EVO8WW 35/30 AR LSS 277 EZ1

Design2Ship Quick Ship Program: Options in green text qualify for Design2Ship — 5 business days from order entry to ship. Refer to Design2Ship Brochure for complete program details. Maximum

Order Quantity: 100 units; 50 for Chicago Plenum.

Luminaire Type:

Catalog Number:

Series Color Temperature Nominal Lumen Values Reﬂector & Flange Color Finish Voltage

EVO8WW 27/ 2700 K

30/ 3000 K 35/ 3500 K 40/ 4000 K

Driver

GZ10 0-10V driver dims to 10% GZ1 0-10V driver dims to 1%

EZ10 eldoLED 0-10V ECOdrive. Linear

dimming to 10% min.

EZ1 eldoLED 0-10V ECOdrive. Linear

dimming to 1% min.

EZB eldoLED 0-10V SOLOdrive.

Logarithmic dimming to <1%.

EDAB

EDXB

eldoLED SOLOdrive DALI. Logarithmic dimming to <1%.

eldoLED POWERdrive DMX with RDM (remote device management). Square Law dimming to <1%. Includes termination resistor.

ECOS2

ECOD

Lutron® Hi-Lume® 2-wire forward-phase driver. 120V only. Minimum dimming level 1%.

Lutron Ecosystem digital HiLume 1% soft-on, fade to black. Maximum 2500 lumens.

20 2000 lumens 25 2500 lumens 30 3000 lumens

Control Interface Options

NLT

NLTER

NLTAIR2 NLTAIRER2

2,6,10

2,9,13

nLight® dimming pack controls

nLight® dimming pack controls emergency circuit

nLight® Air enabled nLight® AIR Dimming

Pack Wireless Controls. Controls ﬁxtures on emergency circuit

EXA1 XPoint Wireless,

eldoLED 0-10V ECOdrive. Linear dimming to 1%. Refer to XPoint tech sheet.

EXAB XPoint Wireless,

eldoLED 0-10V SOLOdrive. Logarithmic dimming to <1%. Refer to XPoint tech sheet.

AR Clear

PR Pewter WTR Wheat GR Gold

WR BR

SF Single fuse. Specify 120V or 277V.

TRW

TRBL

White painted ﬂange Black painted ﬂange

White Black

LSS Semi-specular LD Matte-diffuse LS Specular

EL Emergency battery pack, 10W, with integral test switch ELR Emergency battery pack, 10W, with remote test switch ELSD Emergency battery pack, 10W, with self-diagnostics, integral test switch ELRSD Emergency battery pack, 10W, with self-diagnostics, remote test switch E10WCP Emergency battery pack, 10W,, 10W Constant Power, CA Title 20 compliant with integral test

switch

E10WCPR Emergency battery pack, 10W,, 10W Constant Power, CA Title 20 compliant with remote test

switch

nLight® Lumen Compensation

N80

BGTD Bodine generator transfer device. Specify 120V or 277V.

90CRI High CRI (90+)

RRL__

Chicago Plenum. Specify 120V or 277V.

RELOC®-ready Luminaire connectors enable a simple and consistent factory installed option across all ABL luminaire brands. Available only with RRLA, RRLB, RRLAE, and RRLC12S. Refer to RRL spec sheet on www.acuitybrands.com for RELOC product speciﬁcations. Above ceiling access required.

120 277 347

2,3

ACCESSORIES — order as separate catalog numbers (shipped separately)

CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 5"). Adds ~4" to ﬁxture height. ISD BC

0-10V wallbox dimmer. Refer to ISD-BC.

ORDERING NOTES

1. Not available with ﬁnishes.

2. Not available with EL or ELR options.

3. Supplied with factory installed step down transformer.

4. Refer to TECH-240 for compatible dimmers.

5. Not available with nLight

6. Must specify voltage.

7. For use with different reﬂector ﬁnish only (i.e. AR, PR, WTR, GR options). Not available with WR (white reﬂector).

8. For use with different reﬂector ﬁnish only (i.e. AR, PR, WTR, GR options). Not available with BR (black reﬂector).

EVO8WW page 2 of 6

and XPoint options.

9. For dimensional changes, refer to TECH-140. Access above ceiling required. Not available with 347V.

10. For use with generator supply EM power. Will require an emergency hot feed and normal hot feed.

11. Fixture begins at 80% light level. Must be speciﬁed with eldoLED drivers and NLT or NLTER.

12. ELR not available.

13. Not available DALI or DMX drivers. Not available with CP or N80 options. Not recommended for metal ceiling installations.

SPECIFICATIONS

Optical Assemby

Fully serviceable and upgradeable lensed LED light engine suitable for ﬁeld maintenance or service from below the ceiling.

Unitized optics shall have mechanical attachment of the light engine to the lower reﬂector for complete optical alignment.

Wallwash enables uniformity from ﬂoor to ceiling. Smooth, balanced illumination optimized for ceilings of 8’ to 12’ with recommended spacing of 3’ from wall and 3’ centers.

General Illumination Open Wallwash

Electrical

The luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The ﬂuctuations of line voltage shall have no visible effect on the luminous output.

The luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.

Sound Rated A+. Driver shall be >80% efﬁcient at full load across all input voltages.

Input wires shall be 18AWG, 300V minimum, solid copper.

Controls

Luminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per speciﬁcation.

Dimming

The luminaire shall be capable of continuous dimming without perceivable stroboscopic ﬂicker as measured by ﬂicker index (ANSI/IES RP-16-10) over a range of 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.

eldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing which demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.

Driver is inaudible in 24dB environment, and stable when input voltage conditions ﬂuctuate over what is typically experienced in a commercial environment.

Construction

Luminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32" and minimum 15" extension and 4" vertical adjustment.

Luminaires shall be suitable for installation in ceilings up to 1½" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up to 5")

Tool-less adjustments shall be possible after installation.

The assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical shock and vibration.

25°C ambient temperature standard (1/2" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise). For use in insulated ceilings, a 3" clearance on all sides from insulation is required (unless marked spacing noted otherwise).

Listings

Fixtures are CSA certiﬁed to meet US and Canadian standards: All ﬁxtures manufactured in strict accordance with the appropriate and current requirements of the “Standards for Safety” to UL, wet location covered ceiling.

Photometrics

LEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the minimum operational life of 60,000 hours.

Color appearance from luminaire to luminaire of the same type and in all conﬁgurations, shall be consistent both initially and at 6,000 hours and operate within a tolerance of <2.5 MacAdam ellipse as deﬁned by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.

Buy American

This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american for additional information.

Warranty

5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/customer-support/terms-and-conditions

Note:

Actual performance may differ as a result of end user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Capable Luminaire

This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All conﬁgurations of this luminaire meet the Acuity Brands’ speciﬁcation for chromatic consistency

• This luminaire is part of an A+ Certiﬁed solution for nLight

• This luminaire is part of an A+ Certiﬁed solution for nLight options marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus. *See ordering tree for details

control networks when ordered with drivers marked by a shaded background*

control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control

EVO8WW page 3 of 6

General Illumination Open Wallwash

Tables of Use

Nomenclature Min Dimming Driver Dim Curve Control Dim Curve

EVO - eldoLED Driver Default Dimming Curve

EZ10 10% Linear Linear/Logarithmic

EZ1 1% Linear Linear/Logarithmic

EXA1 1% Linear Linear/Logarithmic

EZB <1% Logarithmic Linear

EDAB <1% Logarithmic Linear

EXAB <1% Logarithmic Linear

EDXB <1% Square Linear

Lumen Output Multiplier

CRI CCT Multplier

2700K 0.96

Reﬂector Finish Multiplier

LSS - Semi Specular 0.956

LD - Matte Diffuse 0.85

3000K 1.00

3500K 1.00

4000K 1.01

2700K 0.80

3000K 0.83

3500K 0.85

4000K 0.87

Reﬂector Finish Multiplier

LS - Specular 1

WR - White 0.87

BR - Black 0.73

Driver

Nomenclature Description NLT NLTER NLTAIR2 NLTAIRER2

GZ10 0-10V driver dims to 10% nPP16 D EFP nPP16 D ER EFP RPP20 D 24V G2 RPP20 D 24V ER G2

GZ1 0-10V driver dims to 1% nPP16 D EFP nPP16 D ER EFP RPP20 D 24V G2 RPP20 D 24V ER G2

EZ10 eldoLED 0-10V ECOdrive nPS 80 EZ nPS 80 EZ ER RPP20 D 24V G2 RPP20 D 24V ER G2

EZ1 eldoLED 0-10V ECOdrive nPS 80 EZ nPS 80 EZ ER RPP20 D 24V G2 RPP20 D 24V ER G2

EZB eldoLED 0-10V SOLOdrive nPS 80 EZ nPS 80 EZ ER RPP20 D 24V G2 RPP20 D 24V ER G2

(note: 347V/UVOLT versions provided with 347 option selected)

Control Provided

How to Estimate Delivered Lumens in Emergency Mode

Delivered Lumens = 1.25 x P x LPW

P = Output power of emergency driver. P = 10W for PS1055CP

LPW = Lumen per watt rating of the luminaire. This information is available on the ABL luminaire spec sheet.

EVO8WW page 4 of 6

]

General Illumination Open Wallwash

DIMENSIONAL DATA

Aperture: 8-5/8 (21.9)

Ceiling Opening: 8-3/4 (22.22)

Overlap Trim: 9-1/4 (23.5)

2,000-3,000LM Standard 2,000-3,000LM Drive Open Frame CP

[21.9

[40.3]

Aperture: 8-5/8 (21.9) Ceiling Opening: 8-3/4 (22.22) Overlap Trim: 9-1/4 (23.5)

[36.0]

EVO8WW page 5 of 6

General Illumination Open Wallwash

NLIGHT AIR NLIGHT

nLight® AIR is the ideal solution for retrofit or new construction spaces where

adding communication wiring is cost prohibitive. The integrated nLight AIR rPP20 Power Pack is part of each EVO Luminaire ordered with the NLTAIR option. These individually addressable controls offer the ultimate in flexibility during initial setup and for space repurposing.

nLight® AIR Control Accessories

Order as separate catalog number. Visit nLight AIR.

Wall Switches

On/Off single pole

On/Off two pole

On/Off & raise/lower single pole

On/Off & raise/lower two pole

AIR Control Accessories (cont.)

nLight

Occupancy Sensors (PIR/dual tech)

Small motion 360

Large motion 360

, ceiling

Model Number

rPODB (color) G2

rPODB 2P (color) G2

rPODB DX (color) G2

rPODB 2P DX (color) G2

Model Number

rCMS 9 / rCMS PDT 9

rCMS 10 / rCMS PDT 10

Possibilites for nLight

AIR

Fixtures ordered without the NLTAIR option

Fixtures ordered with the NLTAIR option

CLAIRITYTM Pro

Mobile App

Pro

CLAIRITY

Mobile App

+24v DC Aux Line Power

rPODB rCMS

rPODB

Wiring Key

rPP20

Low Voltage

Dimming Wires

The nLight® solution is a digital networked lighting control system

nLight

that provides both energy savings and increased user configurability by cost effectively integrating time-based, daylight-based, sensor-based and manual lighting control schemes.

nLight

Wired Control Accessories

Order as separate catalog number. Visit nLight.

Wall Switches

On/Off single pole

On/Off two pole

On/Off & raise/lower single pole

On/Off & raise/lower two pole

Graphic touchscreen

Model Number

nPODM (color)

nPODM 2P (color)

nPOD DX (color)

nPODM 2P DX (color)

nPOD GFX (color)

Photocell Controls

Dimming

nCM ADCX

nLight® Wired Control Accessories (cont.)

Occupancy Sensors (PIR/dual tech)

Small motion 360

Large motion 360

, ceiling

Wide View

Wall switch with raise/lower

Model Number

nCM 9 / nCM PDT 9

nCM 10 / nCM PDT 10

nWV 16 / nWV PDT 16

nWSX LV DX / nWSX PDT LV DX

Cat-5 Cables (plenum rated)

10’, CAT5

15’, CAT5

CAT5 10FT J1

CAT5 15FT J1

Possibilites for nLight® wired

Fixtures ordered without the NLT option

Fixtures ordered with the NLT option

nCM nPODM

Wiring Key

CAT-5e Cable Line Power

nPS 80 EZ or nPP16 D

Low Voltage

Dimming Wires

EVO8WW page 6 of 6

GOTHAM Bounding Ray User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual