Gotham 8 DPH SpecSheet
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
HID Downlights
8” DPH
PAR Directional
FEAT URES ORDERING INFORMATION
OPTICAL SYSTEM
• Center Beam optical system centers the lamp relative to the aperture, optimizing lamp efficiency.
• Tool-less 0° - 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during relamping and are visible from below the ceiling with trim
assembly removed.
• Designed to allow hot aiming.
• Self-flanged, semi-specular or matte-diffuse cone designed to minimize
backflash. Contour cut reduces visibility of inner housing.
• Trim assembly retained by self-aligning torsion support springs.
• Internal housing components painted black.
MECHANICAL SYSTEM
• Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
• Re-lamp capability from above or below ceiling.
• Mounting bars are 16-gauge galvanized steel with continuous 4” vertical adjust-
ment, held in place with tool-less, integral camaction locking. Post installation
adjustment possible without the use of tools from above or below the ceiling.
Shipped pre-installed.
• Secondary housing adjustment system for precise, final ceiling to flange
alignment.
EXAMPLE: DPH P3039MHC 8ACT30 120 TRW
• Galvanized steel junction box with bottom-hinged access covers and spring
latches. Two combination 1/2” - 3/4” and three 1/2” knockouts for straightthrough conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors, rated
for 90°C.
ELECTRICAL SYSTEM
• Tool-less access door provides access to junction box through the aperture.
• Medium base porcelain socket with nickel-plated screw shell.
• Pre-wired, encased-and-potted, electromagnetic, 120/277V or 120/347V ballast
tray module is standard. Module can be attached before or after mounting of
mounting/plaster frame.
• Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Series Lamp type1Wattage/Lamp Aperture Trim c ol or Typ e Finish Voltage
DPH (blank)
P30
P38
Metal halide
70M 70W PAR38
100M 100W PAR38
Ceramic metal halide
39MHC 39W PAR30
70MHC 70W PAR38 or PAR30
100MHC 100W PAR38
2
150MHC
150W PAR38
8 AC Clear
3
BC
Black
PC Pewter
WTC Wheat
4
GC
Gold
4
CC
Champagne gold
3
WC
White
3
MB
Contoured black baffle
3
WB
Contoured white baffle
T30 Cut for angles
25°-40°
T20 Cut for angles
15°-25°
T00 Cut for angles
0°-15°
(blank) Semi-specular
LD Matte-diffuse
LS Specular
120
277
347
Ballast Options
(blank) Electro-magnetic
ballast
5
HEB
Electronic
ballast
TRW White painted flange (standard with WC, MB and WB)
6
RRL
QRS
QRSTD
SF
RELOC®-ready luminaire. Provides compatibility with Lithonia RELOC
system. Access above ceiling required.
7
Quartz restrike system (uses 100W max. DC base quartz lamp by others)
7
Quartz restrike system with time delay
Single fuse
7
EC
Emergency circuit (DC socket with leads for connection to
external emergency power source; 100W max. lamp)
CP Chicago plenum
LPFL Flood lamp (shipped separately)
LPSP Spot lamp (shipped separately)
8
LPWFL
Wide flood lamp (shipped separately)
ACCESSORIES order as separate catalog numbers (shipped separately)
LFH702 Locking filter holder for all lamp types. F500
9
Lens for use with 500 series filter holder
LTWFH500 DBL Filter holder for use with PAR30 lamps F7009Lens for use with 700 series filter holder
LTWFH700 DBL Filter holder for use with PAR38 lamps
DPH-8-PAR-DIR
PAGE 1 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/23/13. Specifications subject to change without notice.
8” DPH
Overlap trim 9-1/4 (23.5)
PAR Directional
DIMENSIONAL DATA NOTES
All dimensions are inches (centimeters) unless otherwise noted.
25-5/8
(65.1)
12-1/8 (30.8)
19-3/4
(50.2)
Aperture: 7-7/8 (20)
Ceiling opening: 8-7/16 (21.4)
ORDERING NOTES
1. Size is required when ordering with lamp.
2. California Title 20 compliant. HEB only.
3. Not available with finishes.
4. Not recommended for use with metal halide lamps; consult factory.
5. Available in 120V or 277V only. MHC lamps only.
6. For compatible RELOC systems, refer to TECH-110.
7. QRS, QRSTD and EC not available in combination or with filter holders.
8. Available with PAR38 only.
9. Refer to TECH-120 for lens color availability.
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/23/13. Specifications subject to change without notice.
DPH-8-PAR-DIR
PAGE 2 OF 3
Loading...