Gotham 8 DP SpecSheet

Luminaire Type:
Catalog Number
(autopopulated):

Gotham Architectural Downlighting
Line Voltage Incandescent

8” DP

PAR Directional

Par Lamp

FEAT URES ORDERING INFORMATION

OPTICAL SYSTEM

• Self-flanged, semi-specular clear, matte-diffuse or highly specular cone
designed to minimize back flash. Contour cut reduces visibility of inner housing.

• Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.

• Tool-less 0°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during re-lamping and are visible from below the ceiling with
trim assembly removed.

• Designed to allow hot aiming.

• Trim assembly retained by self-aligning torsion springs.

• Internal housing components painted black.

MECHANICAL SYSTEM

• Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.

• Re-lamp capability from above or below ceiling.

• 16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-

EXAMPLE: DP PAR16-30S 8ACT30 LD TRW

ment are shipped pre-installed. Previous installation adjustment possible
without the use of tools above or below ceiling.

• Secondary housing adjustment system for precise, final flange to ceiling
alignment.

• Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2” - 3/4” and one 1/2” knockout for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.

ELECTRICAL SYSTEM

• Tool-less access door provides access to junction box through the aperture.

• Medium base porcelain socket with nickel-plated screw shell.

• Thermally-activated insulation detector is replaceable without the use of tools.

LISTING

• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.

WARRANTY

• 1-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Series Wattage/Lamp Aperture/Trim color Typ e Finish

DP PAR16-30S PAR16, PAR20 and PAR30S (short-

neck,75W max.) compatibility

PAR30L-38 PAR30L (75W max.) and PAR38 (250W

max.) compatibility

PAR46 PAR46 (200W max.) compatibility
PAR56 PAR56 (300W max.) compatibility

8AC

Clear

8BC1Black
8PC Pewter
8WTC Wheat
8GC Gold

1

8WC

White painted

1

8MB

Black baffle

1

8WB

White baffle

Cut for angles 25°-40°

T30
T20 Cut for angles 15°-25°
T00 Cut for angles 0°-15°

(blank) Semi-specular

LD Matte-diffuse
LS Specular

Options

2

SDT
SDT347

TRW

277V stepdown transformer (277V to 120V). Add 4” to width of fixture

2

347V stepdown transformer (347V to 120V). Add 4” to width of fixture
(75W max)
White painted flange (Standard with WC, MB, and WB.)

2

Single fuse

SF
RRL3RELOC®-ready luminaire. Provides compatibility with Lithonia RELOC system. Access

above ceiling required.

CP

Chicago plenum

TRBL Black painted flange

ACCESSORIES order as separate catalog numbers (shipped separately)

LFH701 Locking Filter Holder for use with PAR16-30S. LTWFH500 DBL Filter Holder for use with PAR30S & PAR30L F700
LFH702 Locking Filter Holder for use with PAR30L-38 LTWFH700 DBL Filter Holder for use with PAR38 F800
LFH703 Locking Filter Holder for use with PAR46 and PAR56 F400
LTWFH400 DBL Filter Holder for use with PAR20 F500

DP-8-PAR-DIRECTIONAL

PAGE 1 OF 3

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/12/13. Specifications subject to change without notice.

4

4

Lens for use with 400 series filter holder GFC800 Gotham Filter Clips for use with PAR46
Lens for use with 500 series filter holder and PAR56

4

Lens for use with 700 series filter holder

4

Lens for use with 800 series filter holder

8” DP

Overlap Trim:

PAR Directional

Par Lamp

DIMENSIONAL DATA NOTES

All dimensions are inches (centimeters) unless otherwise noted.

17-3/8

(44.1)

12-1/8 (30.8)
10-1/2 (26.7)*

19-3/4

(50.2)

*Housing height for PAR16-30S.

Aperture:

7-7/8 (20.1)

Ceiling Opening: 8-7/8 (22.5)

9-1/4 (23.5)

ORDERING NOTES

1. Not available with finishes.

2. Single fuse standard when SDT or SDT347 options are ordered.

3. For compatible RELOC systems, refer to TECH-110.

4. Refer to TECH-120 for lens color availability.

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/12/13. Specifications subject to change without notice.

DP-8-PAR-DIRECTIONAL

PAGE 2 OF 3