FEATURES
OPTICAL SYSTEM
• Self-flanged semi-specular, matte-diffuse or specular reflector. Patented Bounding Ray™ Optical Principle design (U.S.
Patent No. 5,800,050) provides lamp before lamp image and
smooth transition from top of reflector to bottom.
• Patent-pending integrated snoot and optical system minimizes
lamp striations normally associated with PAR lamps and creates visually pleasing scallops on vertical surfaces.
• Marine-grade die-cast aluminum bezel, low copper alloy
(<1% copper). Matte white (DWHG) standard. Stainless steel
®
Torx
• Perimeter lens gasket is one-piece closed-cell silicone "O"
MECHANICAL SYSTEM
• 16-gauge galvanized steel mounting/plaster frame with inte-
• 16-gauge galvanized steel mounting bars with continous 4"
• Galvanized steel junction box with hinged access covers and
ELECTRICAL SYSTEM
• Die-cast aluminum lampholder housing.
• Medium-base porcelain socket with nickel-plated screw
• Thermally-activated insulation detector.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed
• IP55 rating (below the mounting surface) is standard. IP65
WARRANTY
• 1-year limited warranty. Complete warranty terms located
T20 tamper-resistant screws.
ring. Perimeter ceiling gasket is closed-cell silicone that seals
bezel to ceiling.
gral yoke to retain optical system. Maximum 7/8" ceiling thickness.
vertical adjustment are shipped pre-installed. Post-installation adjustment possible without the use of tools from above
or below the ceiling.
spring latch. Two combination 1/2"-3/4" and two 1/2" knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out)
No. 12 AWG conductors rated for 90°C.
shell.
mounting and wet locations. Listed and labeled to comply
with Canadian standards.
rating possible with the use of silicone. Refer to TECH-200 for
ingress protection ratings.
at www.acuitybrands.com/CustomerResources/
Terms_and_conditions.aspx.
Type Catalog number
................. .................................................................................................
................. ..................................................................................................
Vandal Resistant Incandescent Downlights
6" VRAPR6" VRAPR
6" VRAPR
6" VRAPR6" VRAPR
Lightshield
PAR30 or PAR38 Lamp
13
15
[40.2]
16
7
[32.8]
12
8
Aperture: 6-1/4(15.9)
Ceiling Opening: 7-1/8 (18.1)
* Maximum height for PAR30
lamp is 9-9/16".
9
1
[4.0]
16
All dimensions are
inches (centimeters).
1
6
[15.9]
4
7
9
[24.0]
16
1 [2.6]
3
[29.8]
11
4
TM
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
Order accessories as separate catalog numbers (shipped separately).
VRAPRVRAPR
VRAPR
VRAPRVRAPR
Series
VRAPRVRAPR
VRAPR
VRAPRVRAPR
Lamp
designation
PAR30PAR30
PAR30 PAR30 (75W
PAR30PAR30
max.)
PAR38PAR38
PAR38 PAR38
PAR38PAR38
(150W max.)
NOTES
1 Not suitable for pole relamping.
2 Not available with finishes.
3 Maximum wattage: 150W.
4 Single fuse standard when SDT or SDT347 options are
ordered.
5 For compatible Reloc systems, refer to TECH-110.
6 Not available with CVX lens.
7 Must specify wattage. Ex.: WRL75
8 Additional architectural colors available; see
www.lithonia.com/archcolors.
Aperture/Trim color
6AR 6AR
6AR Clear
6AR 6AR
22
2
22
6BR6BR
6BR
Black
6BR6BR
6PR6PR
6PR Pewter
6PR6PR
1
6WTR6WTR
6WTR Wheat
6WTR6WTR
6GR6GR
6GR Gold
6GR6GR
22
2
22
6WR6WR
6WR
White painted
6WR6WR
Finish
(blank) Semi-
specular
LDLD
LD Matte-
LDLD
diffuse
LSLS
LS Specular
LSLS
Lens type
33
3
33
CGLCGL
CGL
1/8" safety
CGLCGL
glass lens
33
3
33
T73T73
T73
3/16"
T73T73
tempered
prismatic lens
33
3
33
FOLFOL
FOL
1/8" tempered
FOLFOL
flush opal
glass lens
33
3
33
CVXCVX
CVX
3/16" clear
CVXCVX
convex glass
lens
Example:
SDTSDT
SDT
SDTSDT
SDT347SDT347
SDT347
SDT347SDT347
LRCLRC
LRC
LRCLRC
WGWG
WG Zinc-plated wire guard
WGWG
PCUPCU
PCU
PCUPCU
WRLWRL
WRL
WRLWRL
Architectural Colors -Architectural Colors -
Architectural Colors -
Architectural Colors -Architectural Colors -
DWHGDWHG
DWHG Matte white
DWHGDWHG
DDBDDB
DDB Dark bronze
DDBDDB
DBLDBL
DBL Black
DBLDBL
DWHDWH
DW H Gloss white
DWHDWH
DMBDMB
DMB Medium bronze
DMBDMB
DNADNA
DN A Natural aluminum
DNADNA
VRAPR PAR38 6AR CGL DWHGVRAPR PAR38 6AR CGL DWHG
VRAPR PAR38 6AR CGL DWHG
VRAPR PAR38 6AR CGL DWHGVRAPR PAR38 6AR CGL DWHG
44
4
44
277V to 120V stepdown transformer
44
4
44
347V to 120V stepdown transformer (75W max.)
SFSF
SF Single fuse
SFSF
55
5
55
Provides compatibility with Lithonia Reloc
System. Lithonia Reloc System can be installed
less this option with connectors provided by
others. Access above ceiling required
CPCP
CP Chicago plenum
CPCP
66
6
66
3/16" clear polycarbonate lens underlay
(roomside)
77
7
77
Wattage restriction label
88
8
Powder PaintPowder Paint
Powder Paint
Powder PaintPowder Paint
(standard)
88
Options
®
Architectural Colors -Architectural Colors -
Architectural Colors -
Architectural Colors -Architectural Colors -
PlatingPlating
Plating
PlatingPlating
PWRPWR
PWR Pewter
PWRPWR
SCHSCH
SCH Satin chrome
SCHSCH
ORBORB
ORB Oil-rubbed
ORBORB
bronze
VRAPR 6 VINC-426
Ave Lumens
0
1478
5
1500
1441
451
76
20
9
5
2
0
0
Ave Lumens
0
9438
5
6701
767
109
15
3
1
1
0
0
0
™
145
379
219
499
251
90° - 180°
53
0° - 180°
17
8
5
2
0
56
90° - 180°
11
0° - 180°
3
1
1
0
0
Output dataOutput data
Output data
Output dataOutput data
Zone Lumens % Lamp
0° - 30°
743.0
795.9
820.7
828.1
0.0
828.1
805.4
816.6
820.7
821.8
0.0
821.8
50.5
54.1
55.8
56.3
*56.3
54.8
55.6
55.8
55.9
*55.9
0° - 40°
0° - 60°
0° - 90°
*Efficiency
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
*Efficiency
0.0
0.0
Coefficient of utilizationCoefficient of utilization
Coefficient of utilization
Coefficient of utilizationCoefficient of utilization
pc 80% 70% 50%
pw 50% 30%10% 50% 30%10% 50% 30%10%
0
1
2
3
4
5
RCR
6
7
8
9
10
pc 80% 70% 50%
pw 50% 30%10% 50% 30%10% 50% 30%10%
0
1
2
3
4
5
RCR
6
7
8
9
10
67
67
67
61
62
63
56
57
59
52
54
56
49
51
53
46
48
51
43
46
48
41
43
46
39
41
44
38
40
42
36
38
41
67
67
67
62
63
64
59
60
61
56
58
59
55
56
58
53
54
56
52
53
55
51
52
54
50
51
53
49
50
52
48
49
51
%02fp
63
66
66
66
61
62
57
58
53
55
50
53
48
50
45
48
43
46
41
44
39
42
38
40
%02fp
65
65
62
63
59
60
57
59
55
57
54
56
53
55
52
54
51
53
50
52
49
51
60
60
57
55
54
51
51
48
49
46
47
43
45
41
43
39
42
38
40
36
62
65
60
61
59
58
57
56
56
54
55
53
54
52
53
51
52
50
51
49
51
48
6" VRAPR6" VRAPR
6" VRAPR Lightshield
6" VRAPR6" VRAPR
Distribution curveDistribution curve
Distribution curve
Distribution curveDistribution curve
VRAPR PAR38 6AR T73VRAPR PAR38 6AR T73
VRAPR PAR38 6AR T73, (1) 90W PAR38 lamp, 1470 rated lumens, 0.8 s/mh Test No. LTL20594
VRAPR PAR38 6AR T73VRAPR PAR38 6AR T73
600
1200
0° 20°
VRAPR PAR38 6AR CGLVRAPR PAR38 6AR CGL
VRAPR PAR38 6AR CGL, (1) 90W PAR38 lamp, 1470 rated lumens, 0.3 s/mh Test No. LTL20595
VRAPR PAR38 6AR CGLVRAPR PAR38 6AR CGL
3600
7200
Distribution dataDistribution data
Distribution data
Distribution dataDistribution data
80°
15
25
35
60°
45
55
65
75
85
90
40°
80°
15
25
35
60°
45
55
65
75
85
90
40°
Single luminaire data 30" above floorSingle luminaire data 30" above floor
Single luminaire data 30" above floor
Single luminaire data 30" above floorSingle luminaire data 30" above floor
63
63
58
59
54
55
Mounting
51
52
49
47
45
43
41
39
38
62
60
58
56
55
54
52
51
51
50
49
Height
48
8.0
45
10.0
43
12.0
41
14.0
39
16.0
38
36
62
59
57
Mounting
55
Height
54
8.0
52
10.0
51
12.0
50
14.0
50
16.0
49
48
50% beam -
Inital FC
Center
Beam Diameter FC Diameter FC
48.9
26.3
16.4
11.2
8.1
Inital FC
Center
Beam Diameter FC Diameter FC
312.0
167.8
104.6
71.4
51.8
41.3°
4.1
5.7
7.2
8.7
10.2
50% beam -
14.3°
1.4
1.9
2.4
2.9
3.4
24.4
13.1
8.2
5.6
4.1
156.1
83.9
52.3
35.7
25.9
10% beam -
6.1
8.3
10.5
12.7
14.9
10% beam -
2.7
3.7
4.7
5.7
6.7
57.9°
27.9°
4.9
2.6
1.6
1.1
0.8
31.2
16.8
10.4
7.1
5.2
0° 20°
NOTES:
• For electrical characteristics, refer to Technical Bulletins tab.
• Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field
measurements. Dimensions and specifications are based on the most current available data and are subject to change without notice.
• Consult factory or IES file for microgroove baffle, black cone and other photometric reports.
• Actual performance may differ as a result of end-user environment and application.
VINC-426
©2012 Acuity Brands Lighting, Inc. All Rights Reserved.
Rev. 02/12