Gotham 6 SQFW SpecSheet
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
Compact Fluorescent Downlights
6” SQFW
Square Lensed Wallwash
Double Twin-Tube or Triple-Tube lamp
FEAT URES ORDERING INFORMATION
OPTICAL SYSTEM
• Self-flanged, matte-diffuse high-impact polymer finishing trim with a durable,
proprietary vapor deposition finish.
• Patented Bounding Ray™ Optical Principle design (U.S. Patent No. 5,800,050)
provides lamp before lamp image and smooth transition from top of the reflector
to bottom.
• One piece trim eliminates mitered flange corners and inside corner gaps.
• Upper reflector is painted a highly reflective matte white providing diffuse, even
light with high efficiency.
• Dual kicker design along with proprietary Gotham spread lens delivers a uniform
distribution of light to the wall.
MECHANICAL SYSTEM
• 16-gauge painted steel mounting/plaster frame accommodates up to 1-1/2”
thick ceiling materials.
• Patented adjustable aperture allows 1/4” adjustments in all directions and up
to 5° of rotation allowing post-installation adjustments to ensure trim-to-trim
alignment.
• 16-gauge galvanized steel mounting bars with continuous 4” vertical adjustments are shipped pre-installed. Post-installation adjustment possible without
the use of tools from above or below ceiling.
EXAMPLE: SQFW 1/32TRT 6AR MVOLT
• Secondary housing adjustment system for precise, final ceiling to flange
alignment.
• Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
• Horizontally-mounted, four-pin, positive-latch, thermoplastic socket.
• Class P, thermally protected, high power factor electronic ballast mounted to the
junction box.
LISTING
• Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian Standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Series Wattage/Lamp Aperture/Trim color Finish Voltage Ballast
SQFW 1/18DTT
1/26DTT
1/18TRT
1/26TRT
1/32TRT
1/42TRT
1
1
6AR Clear
6PR Pewter
6WTR Wheat
6DSR Stepped
6PDSR Pewter stepped
6WDSR
6WR
6BR
2
2
Wheat stepped
White
Black
3
(blank)
Semi-specular
LD Matte-diffuse
MVOLT
120
277
347
4
(blank) Electronic ballast (standard)
ECOS EcoSystem™ electronic dimming ballast. Minimum
ADEZ
ADZT Advance Mark 7
5
dimming level 5%.
6
Advance Mark 10® electronic dimming ballast.
Minimum dimming level 5%
electronic dimming ballast.
Minimum dimming level 5%
Options
7
ELR
ELRSD
GMF
GLR
CP Chicago plenum
BDP
MFLG
SQMT
Emergency battery pack. Remote test switch
7
Emergency battery pack with self-diagnostics. Remote test switch provided
8
Single, slow-blow fuse
8
Single, fast-blow fuse
9
Ballast disconnect plug
10
Microflange trim
11
Square metal trim
ACCESSORIES order as separate catalog numbers (shipped separately)
NSP5 D ER KIT
SQFW-6-LENSED
PAGE 1 OF 3
Sensor Switch nLight secondary relay and dimming pack device used to switch and dim luminaires powered via an emergency circuit. Refer to NSP5 D ER KIT.
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/06/14. Specifications subject to change without notice.
WLP With 3500 K lamp (shipped separately)
12
NEPP
Interface for Sensor Switch® nLight® network provided with integral power supply.
Refer to TN-623-01.
RRL__
TRW
TRBL
RELOC®-ready luminaire connectors enable a simple and consistent factory installed
option across all ABL luminaire brands. Refer to RRL for complete nomenclature.
13
White painted flange
14
Black painted flange
6” SQFW
(47.2)
Overlap Trim: 7-3/16 (18.3)
Square Lensed Wallwash
Double Twin-Tube or Triple-Tube lamp
DIMENSIONAL DATA NOTES
All dimensions are inches (centimeters) unless otherwise noted.
7-1/2
(19.11)
Aperture: 6 (15.2)
19-13/16
(50.3)
Ceiling Opening: 6-5/8 (16.8)
18-9/16
ORDERING NOTES
1. Requires 4-pin lamp. Ships as TRT fixture.
2. Not available with matte-diffuse finishes.
3. Available with WR and BR trim colors and SQMT metal trim option.
4. Multi-volt electronic ballast capable of operating on any line voltage from
120V through 277V, 50 or 60HZ.
5. For additional ballast types, refer to Technical Bulletins.
6. Available in 120V or 277V only.
7. For dimensional changes, refer to TECH-140.
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/06/14. Specifications subject to change without notice.
8. Not available with MVOLT. Must specify voltage.
9. Meets codes that require in-fixture disconnect.
10. Order ships as 3 components: housing, trim and microflange gypsum board.
11. Not available with stepped reflector or MFLG option.
12. For emergency generator/inverter applications order non-nLight enabled fixture
and NSP5 D ER KIT as an accessory. Refer to NSP5 D ER KIT.
13. Not available with white reflector.
14. Not available with black reflector.
SQFW-6-LENSED
PAGE 2 OF 3
Loading...