Gotham 6 PDRGH SpecSheet
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
Decorative HID Downlights
6” PDRGH
Semi-recessed Glass Shade
ED17 Lamp
FEAT URES ORDERING INFORMATION NOTES
GLASS SHADE
• Semi-recessed shade is pressed, colored glass with an acid etched exterior finish and a matte white glazed interior décor. Available in white, amber and blue.
• Minimum flange with textured polyester powder paint finish available in matte
white, matte black or satin silver.
MECHANICAL SYSTEM
• 16-gauge painted steel mounting/plaster frame with integral brackets to retain
glass shade. Maximum 1-1/2” ceiling thickness.
• 16-gauge galvanized steel mounting bars with continuous 4” vertical adjustment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
• Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and four 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
EXAMPLE: PDRGH 50M 6WG DBLB 120
Series Wattage/Lamp
PDRGH
Metal halide (ED17)
50M
70M
Color-corrected metal halide (ED17)
70MHC
1
Shade color Flange color Voltage Ballast Options
6WG White
glass
6AG Amber
glass
6BG Blue
glass
DWHG Matte
white
DBLB Matte
black
DNAS Satin
silver
ELECTRICAL SYSTEM
• Medium-base porcelain socket with nickel-plated screw shell.
• Pre-wired, electronic, 120 or 277V ballast module is standard. Assembly can be
attached before or after mounting of mounting/plaster frame.
• Thermally activated insulation detector.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
120
277
347
(blank) Electronic
2
EMB Electromagnetic
ballast
ballast
SF Single fuse
WLP 3000 K lamp (shipped separately)
3
RRL
RELOC®-ready luminaire. Provides
compatibility with Lithonia RELOC
system. Access above ceiling required.
CP Chicago plenum
ORDERING NOTES
1. Recommended for use with coated lamps. Open rated lamps required.
2. Available only with EMB.
3. For compatible RELOC systems, refer to TECH-110.
PDRGH-6-SHADE
PAGE 1 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/20/13. Specifications subject to change without notice
8” PDRGH
Overlap trim: 7-7/8 (20.0)
15-1/8
Semi-recessed Glass Shade
ED-17 Lamp
DIMENSIONAL DATA ELECTRICAL
All dimensions are inches (centimeters) unless otherwise noted.
(38.4)
9-3/8
(23.8)
3-1/2
(8.9)
15-7/8
(40.3)
Overall Diameter: 5-7/8 (11.0)
Ceiling opening: 7-1/8 (18.1)
ENERGY
(Calculated in accordance with NEMA standard LE-5A)
Annual*
Energy
LER.DOH
Cost
$10.16
24
$7.97
30
*
Comparative yearly lighting energy cost per 1000 lumens
Lamps
(1) 26W TRT
(1) 32W TRT
Lamp
Lumens
3400
5500
Ballast
Factor
1.0
0.98
Input
Watts
64
78
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/20/13. Specifications subject to change without notice
PDRGH-6-SHADE
PAGE 2 OF 3
Loading...