Page 1
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
HID Downlights
6” DPH
PAR Directional
FEAT URES ORDERING INFORMATION
OPTICAL SYSTEM
• Center Beam optical system centers the lamp relative to the aperture, optimizing lamp efficiency.
• Tool-less 0° - 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during relamping and are visible from below the ceiling with trim
assembly removed.
• Designed to allow hot aiming.
• Self-flanged, semi-specular or matte-diffuse cone designed to minimize
backflash. Contour cut reduces visibility of inner housing.
• Trim assembly retained by self-aligning torsion support springs.
• Internal housing components painted black.
MECHANICAL SYSTEM
• Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
• Re-lamp capability from above or below ceiling.
• Mounting bars are 16-gauge galvanized steel with continuous 4” vertical adjustment, held in place with tool-less, integral camaction locking. Post installation
adjustment possible without the use of tools from above or below the ceiling.
Shipped pre-installed.
• Secondary housing adjustment system for precise, final ceiling to flange
alignment.
EXAMPLE: DPH P3039MHC 6ACT30 120 TRW
• Galvanized steel junction box with bottom-hinged access covers and spring
latches. Two combination 1/2” - 3/4” and three 1/2” knockouts for straightthrough conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors, rated
for 90°C.
ELECTRICAL SYSTEM
• Tool-less access door provides access to junction box through the aperture.
• Medium base porcelain socket with nickel-plated screw shell.
• Pre-wired, encased-and-potted, electromagnetic, 120/277V or 120/347V ballast
tray module is standard. Module can be attached before or after mounting of
mounting/plaster frame.
• Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Series Lamp type1Wattage/Lamp Aperture Trim c ol or Typ e Finish Voltage
DPH (blank)
P30
P38
Metal halide
70M 70W PAR38
100M 100W PAR38
2
150M
150W PAR38
Ceramic metal halide
39MHC 39W PAR30
70MHC 70W PAR38 or PAR30
100MHC 100W PAR38
2
150MHC
150W PAR38
6 AC Clear
3
BC
Black
PC Pewter
WTC Wheat
4
GC
Gold
3
WC
White painted
3
MB
Contoured black baffle
3
WB
Contoured white baffle
T30 Cut for angles
25°-40°
T20 Cut for angles
15°-25°
T00 Cut for angles
0°-15°
(blank) Semi-specular
LD Matte-diffuse
LS Specular
120
277
347
Ballast Options
(blank) Electro-magnetic
ballast
5
HEB
Electronic
ballast
TRW White painted flange (standard with WC, MB and WB)
6
RRL
QRS
QRSTD
SF
RELOC®-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
7
Quartz restrike system (uses 100W max. DC base quartz lamp
by others)
7
Quartz restrike system with time delay
Single fuse
ACCESSORIES order as separate catalog numbers (shipped separately)
LFH502 Locking filter holder for all lamp types. F500
LTWFH500 DBL Filter holder for use with PAR30 lamps F700
LTWFH700 DBL Filter holder for use with PAR38 lamps
DPH-6-PAR-DIR
PAGE 1 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/04/14. Specifications subject to change without notice.
EC
CP Chicago plenum
LPFL Flood lamp (shipped separately)
LPSP Spot lamp (shipped separately)
LPWFL
9
Lens for use with 500 series filter holder
9
Lens for use with 700 series filter holder
7
Emergency circuit (DC socket with leads for connection
to external emergency power source; 100W max. lamp)
8
Wide flood lamp (shipped separately)
Page 2
6” DPH
19-3/4
A
Ceiling
Overlap trim: 7-3/8 (18.7)
(30.8)
PAR Directional
DIMENSIONAL DATA NOTES
All dimensions are inches (centimeters) unless otherwise noted.
25-5/8
(65.1)
12-1/8
(50.2)
perture: 6-1/4 (15.9)
opening: 6-7/8 (17.5)
ORDERING NOTES
1. Size is required when ordering with lamp.
2. California Title 20 compliant. 120V and 277V requires HEB.
3. Not available with finishes.
4. Not recommended for use with metal halide lamps; consult factory.
5. Available in 120V or 277V only. MHC lamps only.
6. For compatible RELOC systems, refer to TECH-110.
7. QRS, QRSTD and EC not available in combination or with filter holders.
8. Available with PAR38 only.
9. Refer to TECH-120 for lens color availability.
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/04/14. Specifications subject to change without notice.
DPH-6-PAR-DIR
PAGE 2 OF 3
Page 3
6” DPH
LC
CDM35/PAR30L/M/SP
C
71
CDM35/PAR30L/M/FL
C
CDM70/PAR30L/M/SP
C
CDM70/PAR30L/M/FL
C
36
28
CDM70/PAR38/SP/3K
C
91
CDM70/PAR38/FL/3K
C
CDM70/PAR38/WFL/3K
C
A8
CDM100/PAR38/SP/3K
C
CDM100/PAR38/FL/3K
CBCP
CDM100/PAR38/WFL/3K
C
A8
MP70PAR38/U/SP20/ECO
C
MP70PAR38/U/FL35/ECO
C
MP100PAR38/U/FL35/ECO
C
MP100PAR38/U/VWFL65/ECO
C1
MP150PAR38/U/SP20/ECO
C
20 85 7.1 7.1 N/A 20 55 8.1 9.511.5 14 61 7.0 10.2 14.0 10 43 7.115.617.3
PAR Directional
PHOTOMETRY
LAMP PERFORMANCE DATA
The lighting performance data charts shown provide lighting levels (footcandles),
beam pattern (in feet), rated lamp life (hours).
L
FC
W
Rated Beam
Life Spread DFCW LC DFCW LC DFCW LC DFCW
9000 10 16 172 2.8 2.8 N/A 12 198 2.4 2.8 6.910 156 2.53.5 10.0 6 153 2.14.3 10.4
20 110 3.5 3.5 N/A 20 71 4.0 4.711.514793.5 4.9 14.0 10 55 3.57.2 17.3
9000 30 8116 4.3 4.3 N/A 6 134 3.7 4.4 3.5 4 164 3.0 4.6 4.0 2 231 2.1 5.5 3.5
12 51 6.4 6.4 N/A 10 48 6.27.3 5.8 8416.1 9.2 8.0 6266.4 1 6.4 10.4
9000 10 16 266 2.8 2.8 N/A 12 307 2.4 2.8 6.910 240 2.53.5 10.0 6 236 2.14.3 10.4
20 170 3.5 3.5 N/A 20 110 4.04.7 11.5 14 123 3.5 4.9 14.0 10 85 3.57.2 17.3
= 25,000 14.0 128 6.2 6.2 N/A 12 113 6.1 7.2 6.91088 6.3 9.3 10.0687 5.312.510.4
9000 40 6278 4.4 4.4 N/A 6 180 5.0 6.1 3.5 4 221 4.1 6.7 4.0 3 139 4.4 14.5 5.2
14 51 10.2 10.2 N/A 10 65 8.410.25.8 8558.2 13.4 8.0550 7.324.
10,000 15 16 195 4.2 4.2 N/A12 226 3.6 4.2 6.9 10 1773.7 5.4 10.06174 3.2 6.7 10.4
20 125 5.3 5.3 N/A 20 81 6.1 7.111.514905.2 7.5 14.0 10 63 5.311.117.3
10,000 25 8 281 3.5 3.5N/A 6 325 3.1 3.6 3.56177 3.8 5.6 6.0 4 141 3.5 8.3 6.9
12 125 5.3 5.3 N/A 10 117 5.16.0 5.8 10 64 6.3 9.3 10.0 663 5.3 12.5 10.4
10,000 60 6 139 6.9 6.9 N/A690 8.0 10.4 3.5 4 110 6.5 13.94.0 3696.9 N/A 5.2
11.5 11.5 N/A 85110.713.9 4.6 6499.8 20.8 6.0439 9.2 N/A 6.9
05010005 = PCB
14 26 16.2 16.2 N/A 10 32 13.3 17.3 5.8828 13.1 27.7 8.0525 11.5 N/
12,500 15 16 273 4.2 4.2 N/A12 316 3.6 4.2 6.9 10 2473.7 5.4 10.06243 3.2 6.7 10.4
20 175 5.3 5.3 N/A 20 114 6.17.1 11.514 126 5.2 7.5 14.0 10 88 5.3 11.1 17.3
12,500 25 10 250 4.4 4.4 N/A 8 254 4.1 4.8 4.6 8 138 5.0 7.5 8.0 4 195 3.5 8.3 6.9
18 77 8.0 8.0 N/A 16 63 8.29.6 9.2 12 61 7.511.2 12.0849 7.116.613.9
12,500 60 6 194 6.9 6.9 N/A6126 8.0 10.4 3.5 4 155 6.5 13.94.0 3976.9 N/A 5.2
11.5 11.5 N/A 87110.713.9 4.6 6699.8 20.8 6.0455 9.2 N/A 6.9
07010007 = PCB
14 36 16.2 16.2 N/A 10 45 13.3 17.3 5.8839 13.1 27.7 8.0535 11.5 N/
8500 20 6942.1 2.1 N/A 661 2.4 2.9 3.5475 2.02.9 4.02106 1.43.1 3.5
10.0 34 3.53.5 N/A10224.1 4.8 5.8 8194.0 5.8 8.0 427 2.8 6.2 6.9
8500 35 6278 3.8 3.8 N/A 6 180 4.4 5.23.5 4 221 3.65.6 4.02313 2.57.2 3.5
10 100 6.3 6.3 N/A 10 65 7.38.7 5.8 8557.1 11.2 8.0 4785.0 14.4 6.9
8500 35 8188 5.0 5.0 N/A 6 217 4.4 5.2 3.5 4 265 3.6 5.6 4.0 2 375 2.5 7.2 3.5
12 83 7.6 7.6 N/A 10 78 7.38.7 5.8 8667.1 11.2 8.0494 5.014.4 6.9
8500 65 6.0 125 7.6 7.6 N/A 681 8.8 11.8 3.5 499 7.2 17.2 4.02141 5.1 N/A 3.5
0780054 = PCB
10 45 12.7 12.7 N/A 10 29 14.7 19.6 5.8 82514.434.38.0 43510.2N/A 6.9
0.210.2 N/A 84611.815.74.6 64410.825.76.0 3637.6 N/A 5.2
8500 20 12 236 4.2 4.2 N/A 12 153 4.9 5.7 6.910 120 5.0 7.3 10.0 6 118 4.2 9.3 10.4
PHOTOMETRY NOTES
• Tested to current IES and NEMA standards under stabilized laboratory conditions.
• Actual performance may differ as a result of end-user environment and application.
• Consult factory or IES file for microgroove baffle, black cone or other photometric reports.
DPH-6-PAR-DIR
PAGE 3 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/04/14. Specifications subject to change without notice.
D
A
C
D
FC
L
w
D
A
FC
W
C
L
gnimiA °06gnimiA °54gnimiA °03gnimiA °0
12.0 8862.8 5.
2.40.3801212.97.32.321161A/N1.31.363181000,44 = PCB
3.48540.69.65.43766.49.50.5578A/N4.54.547010047 = PCB
2.40.3761212.97.32.337161A/N1.31.301281000,86 = PCB
12.0 8133 2.85.7 13.9
3.9
10.9 6.9
10.1 6.0478 5.819.
2.68966.41.87.61018A/N3.73.700101000,01 = PCB
4.65.4321212.96.59.472161A/N7.47.445181000,05 = PCB
12.0 8984.2 8.
4.65.4271212.96.59.487161A/N7.47.461281000,07 = PCB
12.0 8137 4.28.9 13.9
4.40950.85.70.59986.48.41.43818A/N4.44.408101000,81 = PCB
10.4 8.7
.9
.7
3.9
.7
.7
2.57.41.27430.64.40.33366.48.33.3538A/N8.28.23580043 = PCB
8.393130.64.84.58966.40.78.51018A/N0.50.56518000,01 = PCB
10.8 5.2
10.8 5.2
8.376130.64.84.581166.40.78.52218A/N3.63.602101000,21 = PCB
7.80.638212.96.75.66861A/N6.56.533161000,43 = PCB
12.0 866 5.6 12.4 13.9
Loading...