
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
HID Downlights
10” LGH
Round Lens
Wet Location
Vertical Metal Halide Lamp
FEAT URES ORDERING INFORMATION NOTES
OPTICAL SYSTEM
• Aluminum upper reflector coated with highly reflective white paint provides high
efficiency and an evenly illuminated aperture appearance.
• Available with tempered prismatic lens (T73), flat Fresnel lens (FFL) or flat opal
lens (FOL).
• Regressed white door (RW) or stepped black baffle (SB) are available with white
painted flange provided.
• Door is retained by self-aligning, torsion support springs, preventing gaps
between door and ceiling.
MECHANICAL SYSTEM
• 16-gauge galvanized steel mounting/plaster frame with integral brackets to
retain optical system. Maximum 1-1/2” ceiling thickness.
• 16-gauge galvanized steel mounting bars with continuous 4” vertical adjustment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
• Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and four 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
EXAMPLE: LGH 150MHC 10RW T73 120 HEB
Series Wattage/Lamp
LGH
Metal halide
2
150M
175M3175W ED28
250M3 250W BT28
1
150W ED17
Door frame Lens type Voltage Ballast Options
10RW Regressed
white door
10SB Stepped
black baffle
T73 Tempered
prismatic lens
FFL Flat fresnel lens
FOL Flat opal lens
Color-corrected
metal halide
2
150MHC
150W ED17
250MHC3250W BT28
ELECTRICAL SYSTEM
• Die-cast aluminum lampholder housing.
• Mogul-base porcelain socket with nickel-plated screw shell.
• Prewired encased-and-potted, 120/277 (pulse-start) or 120/347 (probe-start)
ballast tray module. Module can be attached before or after mounting of
mounting/plaster frame.
• Metal halide: 150W is standard with electronic ballast. Metal halide: 175W &
250W must specify pulse start ballast module (SCWA).
• Thermally-activated insulation detector.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and wet
locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
4
120
277
347
(blank)
5
SCWA
6
Electronic
HEB
Probe start
Pulse start
CP Chicago Plenum
7
TRDA
RRL
Tamper resistant door assembly
8
RELOC®-ready luminaire. Provides
compatibility with Lithonia RELOC system.
Access above ceiling required.
9
QRS
QRSTD
EC
Quartz Restrike System
9
Quartz Restrike System with time delay
9
Emergency circuit
DC129Emergency circuit, 12-volt, 35W DCB lamp
ships separately
SF Single fuse
GSKT Foam gasketing, ships uninstalled
WLP Lamp (shipped separately)
ACCESSORIES order as separate catalog numbers (shipped separately)
SCA10
Sloped ceiling adapter. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA10 10D.
ORDERING NOTES
1. Recommended for use with coated lamps.
2. California Title 20 compliant. Only available with HEB ballast.
3. Must specify SCWA to be EISA compliant.
4. 347V only.
5. Required for 175M and above.
LGH-10-ROUND-LENS
PAGE 1 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2008-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/02/13. Specifications subject to change without notice.
6. 120 or 277V only.
7. Uses Torx T15 rejection pin drive system.
8. For compatible RELOC systems, refer to TECH-110.
9. Not available in combination with each other.

10” LGH
Round Lens
Wet Location, Vertical Metal Halide Lamp
DIMENSIONAL DATA
All dimensions are inches (centimeters) unless otherwise noted.
14-1/4
20-1/8
(36.2)
(51.1)
Aperture: 9-3/4 (24.8)
Ceiling Opening: 10-1/2 (26.7)
23-3/4
Overlap Trim: 10-7/8 (27.6)
(60.3)
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2008-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/02/13. Specifications subject to change without notice.
LGH-10-ROUND-LENS
PAGE 2 OF 3

10” LGH
90°
1200
2400
3600
4800
6000
90°
1300
2600
3900
5200
6500
Round Lens
Wet Location, Vertical Metal Halide Lamp
PHOTOMETRY
Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance: Single Luminaire 30” Above Floor
LGH 250M 10RW T73
LGH 250M 10SB T73
1100
2200
3300
4400
5500
80°
70°
60°
50°
40°
80°
70°
60°
50°
40°
250W BT28 LAMP, 1.1 S/MH, 21500 RATED LUMENS, TEST NO. LTL14542P
From 0° AveLumens
0
6798
5
6756
6490
5758
4382
2791
1446
698
233
59
0
641
1827
2634
2729
2150
1314
702
271
66
15
25
35
45
55
65
75
85
90
Zone Lumens % Lamp
6102.3
0° - 30°
7831.2
0° - 40°
11295.3
0° - 60°
12334.3
0° - 90°
90° - 180°
0° - 180°
0.0
12334.3
*E ciency
*57.4
23.7
36.4
52.5
57.4
0.0
pf
pc
80%70% 50%
pw
50%30% 50% 30% 50%30%
1
.62
2
.55
3
.50
4
.45
5
.41
.38
6
.34
7
.32
8
.29
9
.27
10
.60
.52
.46
.41
.37
.33
.30
.27
.25
.23
.60
.54
.49
.44
.40
.37
.34
.31
.29
.27
20%
250W BT28 LAMP, 1.1 S/MH, 21500 RATED LUMENS, TEST NO. LTL14543P
From 0° AveLumens
0
5816
5
5784
5471
4798
3575
2057
853
247
12
2
0
548
1539
2194
2221
1588
782
260
29
15
25
35
45
55
65
75
85
90
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 180°
0° - 180°
2
4280.5
6501.4
8871.0
9162.4
0.0
9162.4
*E ciency
19.9
30.2
41.3
42.6
0.0
*42.6
80% 70% 50%
pc
50% 30% 50% 30% 50% 30%
pw
1
.46
.45
.40
.36
.32
.29
.26
.24
.22
.20
.19
.45
.41
.38
.34
.32
.29
.27
.25
.23
.21
2
.42
3
.38
4
.35
5
.32
6
.29
7
.27
8
.25
9
.23
10
.22
.59
.51
.45
.41
.36
.33
.30
.27
.25
.23
.44
.39
.35
.32
.29
.26
.24
.22
.20
.19
.58
.52
.47
.43
.39
.36
.33
.31
.28
.27
.44
.40
.37
.34
.31
.28
.26
.24
.23
.21
.57
.50
.44
.40
.36
.32
.29
.27
.25
.23
.43
.38
.35
.31
.28
.26
.24
.22
.20
.19
Mount
height
8
10
12
14
16
Mount
height
8
10
12
14
16
Inital fc
at be am
center
224.7
120.9
75.3
51.4
37.3
Inital fc
at be am
center
192.3
103.4
64.4
44.0
31.9
50% be am angle
59.3°
fc at
beam
Beam
6.3
8.5
10.8
13.1
15.4
edge
112.4
60.4
37.7
25.7
18.7
diameter
50% be am angle
58.3°
fc at
beam
Beam
diameter
edge
6.1
8.4
10.6
12.8
15.0
10% be am angle
Beam
diameter
12.3
16.8
21.2
25.7
30.2
10% be am angle
Beam
diameter
96.1
51.7
32.2
22.0
16.0
96.4°
11.7
15.9
20.2
24.4
28.7
beam
93.4°
fc at
edge
22.5
12.1
7.5
5.1
3.7
beam
fc at
edge
19.2
10.3
6.4
4.4
3.2
LGH 250M 10RW FFL
LGH 250M 10SB FFL
1200
2400
3600
4800
6000
PHOTOMETRY NOTES
• Tested to current IES and NEMA standards under stabilized laboratory conditions.
• Actual performance may differ as a result of end-user environment and application.
• Consult factory or IES file for microgroove baffle, black cone or other photometric reports.
LGH-10-ROUND-LENS
PAGE 3 OF 3
250W BT28 LAMP, 1.0 S/MH, 21500 RATED LUMENS, TEST NO. LTL14544P
From 0° AveLumens
80°
0
5
70°
15
25
60°
35
45
50°
55
65
75
40°
85
90
6211
6058
5610
4675
3466
2322
1269
586
182
43
0
572
1570
2142
2169
1784
1149
589
208
49
Zone Lumens % Lamp
4283.7
0° - 30°
6452.8
0° - 40°
9386.0
0° - 60°
10231.5
0° - 90°
90° - 180°
0° - 180°
0.0
10231.5
*E ciency
*52.5
22.0
33.1
48.2
52.5
0.0
80% 70% 50%
pc
50% 30%50% 30% 50% 30%
pw
1
.56
.55
.55
2
.51
.48
3
.46
.42
4
.41
.38
5
.38
.34
6
.34
.30
7
.32
.28
8
.29
.25
9
.27
.23
10
.25
.21
.50
.45
.41
.37
.34
.31
.29
.27
.25
.54
.47
.42
.37
.33
.30
.27
.25
.23
.21
.53
.48
.43
.40
.36
.33
.31
.28
.26
.24
.52
.46
.41
.36
.33
.30
.27
.25
.23
.21
250W BT28 LAMP, 1.0 S/MH, 21500 RATED LUMENS, TEST NO. LTL14545P
.44
.39
.35
.31
.28
.26
.23
.21
.20
.18
.44
.40
.37
.34
.31
.28
.26
.24
.22
.21
20%
.43
.38
.34
.31
.28
.25
.23
.21
.20
.18
.43
.39
.36
.33
.30
.28
.26
.24
.22
.21
90°
From 0° AveLumens
80°
70°
60°
50°
40°
0
5
15
25
35
45
55
65
75
85
90
6242
6064
5500
4497
3270
2040
933
285
15
2
0
570
1538
2061
2040
1565
852
294
30
2
Zone Lumens % Lamp
4169.0
0° - 30°
6208.6
0° - 40°
8625.6
0° - 60°
8951.4
0° - 90°
90° - 180°
0° - 180°
0.0
8951.4
*E ciency
*41.6
19.4
28.9
40.1
41.6
0.0
pf
80%70% 50%
pc
50%30% 50%30% 50%30%
pw
1
.45
2
.41
3
.37
4
.34
5
.31
6
.29
7
.26
8
.24
9
.23
10
.21
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2008-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/02/13. Specifications subject to change without notice.
.42
.37
.34
.30
.27
.25
.23
.21
.19
.18
Mount
height
8
10
12
14
16
Mount
height
10
12
14
16
8
Inital fc
at be am
center
205.3
110.4
68.8
47.0
34.1
Inital fc
at be am
center
206.3
111.0
69.2
47.2
34.2
50% be am angle
54.5°
fc at
beam
Beam
edge
diameter
102.6
5.7
55.2
7.7
34.4
9.8
23.5
11.9
17.0
13.9
50% be am angle
52.8°
fc at
beam
Beam
5.5
7.4
9.4
11.4
13.4
edge
103.2
55.5
34.6
23.6
17.1
diameter
10% be am angle
95.2°
fc at
beam
Beam
diameter
edge
20.5
12.1
11.0
16.4
6.9
20.8
4.7
25.2
3.4
29.6
10% be am angle
92.5°
fc at
beam
Beam
11.5
15.7
19.9
24.0
28.2
edge
20.6
11.1
6.9
4.7
3.4
diameter